• Applied Microscopy
• /
• v.26 no.4
• /
• pp.389-399
• /
• 1996

In order to understand the morphological differences between two different organic loadings by its upstream, and to compare with other algal groups with references, the fine structure of blue-green algae, Microcystis aeruginosa Kitzing, taken from two branches, Tongbok and Bosung stream of Lake Chuam, Korea pennisula was examined. It showed extinct differences in most physicochemical factors between both branches, except water temperature and pH values. The concentrations of total phosphorus in Tongbok branch were twice as those of Bosung. M. aeruginosa cells were enumerated totally $1.2X10^4cells/ml$ and these individuals in branch of Tongbok were close to two times as much as Bosung. In light and electron microscopy, natural M. aeruginosa colonies formed irregular shape and non-directional array in amorphous matrix. They were consisted of many kinds of cells, youngs or olds in cell division, solitary, and various size of cells. Each cell ranged from 2.61 to $5.40{\mu}m$ in diameter, and averaged as $3.54{\pm}0.19{\mu}m$. In cytoplasm, they contained a number of inclusions in various size, shape and appearances. Among them, polyhedral bodies or carboxysomes, a structured granules, photosynthetic lamellae or thylakoids, and gas vacuoles were prominent and easy to recognize. Although it was failed to find the definable morphological variations in the ultrastructure of M. aeruginosa in terms of algal habitual environments, some useful characters were founded, outer layer of cell wall, polyhedral bodies and gas vacuoles, in blue-green algal classification and taxonomy.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.553-568
• /
• 2018

Chromophoric Dissolved Organic Matter (CDOM) plays a dominant role in absorbing UV-VIS light and is also important in the biogeochemical carbon cycle due to the production of carbon dioxide from photo-oxidation at the sea surface in marine environments. Since absorption by CDOM was recently found to be responsible for increasing the energy absorbed in the mixed layer by 40 % over pure seawater, the importance of CDOM absorption in seawater for increasing sea surface temperature has come to be well recognized. We measured aCDOM and the absorption characteristics of CDOM during spring 2012 and 2014 in the southwestern East Sea. Distribution of CDOM in spring 2012 and 2014 was compared and S value was used to find the source of CDOM in the study area. As a result, the average $a_{CDOM}$ was $0.237m^{-1}$ ($0.009{\sim}0.988m^{-1}$) and the average S value was $16{\mu}m^{-1}$,which shows coastal properties. Also a positive correlation between Chl a and CDOM was observed ($r^2=0.34$), with an especially strong correlation near coastal stations. aCDOM in 2014 was about 40 % higher than aCDOM in 2012 during spring in the study area. This difference in aCDOM concentration resulted not only from annual variation but also from stratification and photobleaching in late spring 2012. This observation implies the possibility of flux of carbon dioxide into the atmosphere as a result of photo-oxidation in the East Sea.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.2
• /
• pp.94-99
• /
• 2008

Korean ginseng (Panax ginseng C.A. Meyer) is very difficult to obtain stable production of qualified ginseng roots because of variable stresses in soil environments. High salt concentrations in the ginseng nursery soil environment of Korea is one of important reducing factors for the stable production of quality ginseng. These studies were accomplished to identify the growth rate and production of ginsenoside from ginseng hairy root against NaCI. In the MS liquid culture, the highest contents and productivity of ginsenosides were appeared at 4 week after onset of the treatment of 0.1 M NaCI. And 0.24 M NaCI was more effective on the growth of ginseng hairy root under light condition than dark condition. Plants generally produce secondary metabolites in nature as a defense mechanism against pathogenic and insect attack. In this study, NaCI acts as a kind of stress as well as elicitor for production of ginsenosides.

• Journal of the Korean Geographical Society
• /
• v.42 no.2 s.119
• /
• pp.243-257
• /
• 2007

This paper aims to analyze fear of crime which is considered socio-psychologically important in our daily lives from a geographical point of view. Especially, the spatial patterns of the fear of crime which were analyzed in the area of Youngtong in Suwon city. First, this paper takes a look at the correlation between the incidence of crime and the fear of crime. Most people feel fear in actual crime scenes, but they do not always coincide with place where people feel the high level of fear. Fear of crime is closely connected with physical environments as well as the incidence of crime. The level of fear is high in places where the light is dark, unfrequented paths, especially in parks and around mountains. Several factors which have effects on fear of crime operate differently upon place. Second, a survey which measures the fear of crime was quantitatively analyzed. Factor analysis was employed to find out whether questions are appropriate for measuring the fear of crime as well as to reduce the amount of data so that more exact result can be derived from the data. Through the factor analysis, seven factors were extracted and it is found that a factor of incivility accounts for 24.032% of variance. Other factors which affect fear of crime are community cohesion, warning, incidence of crime, victimization, morality and authority.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.1
• /
• pp.11-21
• /
• 2008

In conventional video coding, the complexity of encoder is much higher than that of decoder. However, as more needs arises for extremely simple encoder in environments having constrained energy such as sensor network, much investigation has been carried out for eliminating motion prediction/compensation claiming most complexity and energy in encoder. The Wyner-Ziv coding, one of the representative schemes for the problem, reconstructs video at decoder by correcting noise on side information using channel coding technique such as turbo code. Since the encoder generates only parity bits without performing any type of processes extracting correlation information between frames, it has an extremely simple structure. However, turbo decoding errors occur in noisy side information. When there are high-motion or occlusion between frames, more turbo decoding errors appear in reconstructed frame and look like Salt & Pepper noise. This severely deteriorates subjective video quality even though such noise rarely occurs. In this paper, we propose a computationally extremely light encoder based on symbol-level Wyner-Ziv coding technique and a new corresponding decoder which, based on a decision whether a pixel has error or not, applies median filter selectively in order to minimize loss of texture detail from filtering. The proposed method claims extremely low encoder complexity and shows improvements both in subjective quality and PSNR. Our experiments have verified average PSNR gain of up to 0.8dB.

• Journal of the Korean Home Economics Association
• /
• v.20 no.4
• /
• pp.155-168
• /
• 1982

What is attempted here is to find out an optimum method for the design of physical environments that could save human energy expenditures and safely perform household duties. There are, if any, very little amount of research done in this area. This is particulary so when the work relates to the designing of household storage facilities in the light of the energy metabolism of human body. The first step to this study, therefore, is to find out the ways by which we can determine the energy metabolism of human body accurately. To measure the volume and the concentration of human respiration continuously and automatically, a new apparatus is selected here. This includes the recording system with the Wright Respirometer and the Expired Gas Analyzer as well as the computer system to multiply volume by concentration of human respiration and to integrate them for a given time. Then, the author experimented on the reliability of this apparatus and came to the conclusion that this apparatus satisfied our need to research the energy metabolism of human body. Next, the general plan and procedures to experiment with this apparatus have been determined as follows: 1) subjects are three young and sound females. Their physical characteristics are shown in Table 1 and most approximates the standard characteristics of Japanese females, 2) height of open shelves is selected in such away as to correspond to the respective height of each subject(see Table 2), 3) utensils to be stored are box shaped object, which weight is 0.5kg, 1.0kg, 2.0kg or 3.0kg, 4) working motions are given while one or two hands as to place utensil on each shelf from the standard working board, 85 cm in height and then to place back it on the board from the shelf and repeated in constant velocity as 10 times per a minute, 5) each posture of motion is chosen by each subject in free, 6) procedures of measurement of human energy metabolism ard shown at(6), 1, Section 3 as specific methods for using this apparatus. Findings of this study are as follows: 1. Human energy expenditures for storing utensils on shelves by each subject are shown in quantity more accurately than in any other studies, under varying conditions about height of shelves, load of utensils and working motion with one hand and two hands (see Fig. 8~13 and Table 3). 2. Experimental formulae of human energy expenditure for that work are shown as formula (8), (9) and (10), to generalize results of 1. and to apply those for working motion under given conditions. 3. As results of analysis on gained data, we are able to show the standard model of human energy expenditures for storing untensils on shelves by the standard Japanese female (see Table 7 and Fig. 14).

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.447-458
• /
• 2002

In this paper, we design and implement Wireless Transaction Protocol(WTP) and evaluate it for wireless transaction processing in mobile computing environments. The design and implementation of WTP are based on the coroutine model that might be suitable for light-weight portable devices. We test the compatibility between our product and the other products such as Nokia, Kannel and WinWAP For the evaluation of WTP, we use an Internet simulator that can arbitrary generate random wireless errors based on the Gilbert model. In our experiment, the performance of WTP is measured and compared to those of Transmission Control Protocol(TCP) and TCP for Transactions. The experiment shows that WTP outperforms the other two protocols for wireless transaction processing in terms of throughput and delay. Especially, WTP shows much higher performance In ease of high error rate and high probability of burst errors. This comes from the fact that WTP uses a small number of packets to process a transaction compared to the other two protocols and introduces a fixed time interval for retransmission instead of the exponential backoff algorithm. The experiment also shows that the WTP performance is optimized when the retransmission counter is set to 5 or 6 in case of high burst error rate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.298-298
• /
• 2013

Finding renewable and clean energy resources is essential research to solve global warming and depletion of fossil fuels in modern society. Recently, complex harvesting of energy from multiple sources is available in our living environments using a single device has become highly desirable, representing a new trend in energy technologies. We report that when simultaneously driving the fusion and composite cells of two or more types, it is possible to make an affect the other cells to obtain a greater synergistic effect. To understand the coupling effect of photovoltaic and piezoelectric device, we fabricate the serially integrated hybrid cell (s-HC) based on organic solar cell (OSC) and piezoelectric nanogenerator (PNG). The size of increased voltage peaks when OSC and PNG are working on is larger than the case when only PNG is working. This voltage difference is the Voc change of OSC, not the voltage change of PNG and current density difference between these two cases is manifested more clearly. When the OSC and PNG are working in s-HC at the same time, piezoelectric potential (VPNG) is generated in ZnO and theoretical total voltage is sum of voltage of an OSC (VOSC) and VPNG. However, electrons from OSC are influenced by piezoelectric potential in ZnO and current loss of OSC in whole circuit decreases. As a result, VOSC increases temporarily. Current shows the similar behavior. PNG acts a resistance in the whole circuit and current loss occurs when the electrons from OSC pass through the PNG. But piezoelectric potential recover current loss and decrease the resistance of PNG. Our PNG can maintain piezoelectric potential when the strain is held owing to the LDH layer while general PNG cannot maintain piezoelectric potential. During the section that strain is held, voltage enhancement effect is maintained and same effect appeared even turn off the light. Actually at this time, electrons in ZnO nanosheets move to LDH and trapped by the positive charges in this layer. After this strain is held, piezoelectric potential of ZnO nanosheets is disappeared but potential difference which is developed by negative charge dominant LDH layer is remained. This potential acts similar role like piezoelectric potential in ZnO. Electrons from the OSC also are influenced by this potential and the more current flows.

• Journal of Wetlands Research
• /
• v.15 no.3
• /
• pp.289-300
• /
• 2013

In this study, two types of wetland plants, Eichhornia crassipes (a floating plant) and Ceratophyllum demersum (a submerged plant) were introduced to wetland mesocosms to understand how the water properties of wetlands such as pH, dissolved oxygen content, water temperature, oxidation reduction potential, and nutrient concentrations are affected by different types of wetland plant. The floating plant lives on the water surface and can block light penetration; it exhibited the lowest water temperature and temperature difference between lower and upper layers. After the addition of contaminants, the dissolved oxygen (DO) concentration decreased abruptly but recovered continuously in all mesocosms; especially the submerged plants, which photosynthesize in water, showed the largest increases in DO and diel periodicity DO, as well as in pH value. The oxidation-reduction potential in both water and sediment were affected by the presence of wetland plants and plant type and the results suggest that various aspects of wetland biogeochemistry are affected by the presence and type of wetland plants. The total nitrogen and phosphorous concentrations in water decreased in the following order: Water only < Water + Soil < Floating Plants < Submerged Plants. Although both floating and submerged plants can control algal concentrations, the effect was more prominent for floating plants.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.44-52
• /
• 2017

This paper is based on a study of the response characteristics of photoelectric type smoke detector chambers according to dust color. Due to an amendment to the Fire Safety Codes to automatic fire alarm systems and visual alarm device, the installation of indoor smoke detectors has become mandatory, but in Korea there is still insufficient research on the non-operation or false alarms that could arise in indoor environments by indoor dust and other environmental conditions etc. In light of this, for this study, research was conducted on the indoor adaptability of smoke detector under various colors of fiber dust that were judged to occur most frequently in among the common indoor dust, photoelectric smoke detector with the lattice-type smoke detection chamber that the smoke detector which is most popular in the country was used, and four colors of fiber dust (brown, white, gray and black) were used the test dusts for carrying out dust and sensitivity testing. Also, the voltage of the photocell part of the smoke chamber was measured, and the scattering phenomenon in the chamber was observed. The result of the testing showed that all four dust types were suitable for dust and sensitivity testing under conditions of pollution A. Yet, there were occasions, at pollution B or C, where the brown, white and gray dust would cause fail alarm during operation testing. And black dust was confirmed to cause non-operation during operation testing. In the case of brown and white dust, the voltage measurement result of the photocell part of the smoke chamber confirmed that the voltage increases as the pollution level increases, and in the case of gray and black dust, the voltage decreases.