• Applied Microscopy
• /
• v.37 no.1
• /
• pp.1-10
• /
• 2007

Monocrotaline (MCT) is a pyrrolizidine alkaloid (PA) plant toxin that produces hapatotoxicity in humans and animals. To felt the hypothesis, we investigated the possible protective effects of Haedokjeongki-tang as an antioxidant against MCT-induced liver injury in rats. Cells with apoptotic morphology have been observed in the livers of animals exposed to Ph and Haedokjeongki-tang. Whether apoptosis occurs in the livers of MCT-treated animals and whether it is required for full manifestation of pathological changes is not known, To determine this, rats were treated with 100 mg MCT/kg, and apoptosis was detected by transmission electron microscopy and TUNEL assay. MCT produced apoptosis in the liver by 6 h after treatment and increased by 24 h. Administration of Haedokjeongki-tang did affect liver structure and inhibit apopotosis in MCT-induced liver injury. Upon light and electron microscopic examination, we observed that Haedokjeongki-tang improved the morphological and histopathological changes of the liver caused by MCT-induced injury. MCT caused a time-dependent release of GOT and GPT, a marker of liver injury. Furthermore, we observed with respect to antioxidants status, catalase and superoxide dismutase activity tended to be higher in the MCT-treated rats than in the Haedokjeongki-tang administered rats. Our finding showed that Haedokjeongki-tang administration partially reduced liver injury after MCT exposure.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.8
• /
• pp.1339-1348
• /
• 2015

Until now, considerable effort has been made to engineer novel nitrogen-fixing organisms through the transfer of nif genes from various diazotrophs to non-nitrogen fixers; however, regulatory coupling of the heterologous nif genes with the regulatory system of the new host is still not well understood. In this work, a 49 kb nitrogen fixation island from P. stutzeri A1501 was transferred into E. coli using a novel and efficient transformation strategy, and a series of recombinant nitrogen-fixing E. coli strains were obtained. We found that the nitrogenase activity of the recombinant E. coli strain EN-01, similar to the parent strain P. stutzeri A1501, was dependent on external ammonia concentration, oxygen tension, and temperature. We further found that there existed a regulatory coupling between the E. coli general nitrogen regulatory system and the heterologous P. stutzeri nif island in the recombinant E. coli strain. We also provided evidence that the E. coli general nitrogen regulator GlnG protein was involved in the activation of the nif-specific regulator NifA via a direct interaction with the NifA promoter. To the best of our knowledge, this work plays a groundbreaking role in increasing understanding of the regulatory coupling of the heterologous nitrogen fixation system with the regulatory system of the recipient host. Furthermore, it will shed light on the structure and functional integrity of the nif island and will be useful for the construction of novel and more robust nitrogen-fixing organisms through biosynthetic engineering.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.2
• /
• pp.145-170
• /
• 2008

The existence of network is indeed the single most important factor that brings about new business phenomena in the new digital economy, especially in the IT industry. Network effect refers to a phenomenon that the increase in size of the network leads to increased network value and user utility. It determines the competitive structure of an industry and the performances of industry competitors (Shapiro and Varian, 1999). The phenomenon of increasing returns and winner-take-all enjoyed by the early winner in the competition can be attributed to the existence of positive feedback which increases the value of network and induces more users into join the network (Arthur, 1996; Shapiro and Varian, 1999; Song and Lee, 2003). This research attempts to shed light on the topic of innovation and competitive strategy of network-based industries. We analyze the case of the Korean mobile communications industry, in which a shift in technological paradigm from 2G to 3G brought new changes to the competitive structure of the industry. The Korean mobile communications industry makes an ideal case for analysis since it is an industry whose value is inherently dependent upon its user network. It is characterized by the typical increasing returns, in which a monopolizing player is enjoying firstmover's network effects. Because of the existence of network in the mobile communications industry, latecomers' disruptive innovations could not outcompete the incumbent's sustaining innovations. The contribution of this research lies in laying a groundwork for future studies by introducing a numerical simulation model to analyze the complexity theory and network effect.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.121-121
• /
• 2010

ZnO is a promising material for the application of high efficiency light emitting diodes with short wavelength region for its large bandgap energy of 3.37 eV which is similar to GaN (3.39 eV) at room temperature. The large exciton binding energy of 60 meV in ZnO provide provides higher efficiency of emission for optoelectronic device applications. Several ZnO/ZnMgO multiple quantum well (MQW) structures have been grown on various substrates such as sapphire, GaN, Si, and so on. However, the achievement of high quality ZnO/ZnMgO MQW structures has been somehow limited by the use of lattice-mismatched substrates. Therefore, we propose the optical properties of ZnO/ZnMgO multiple quantum well (MQW) structures with different well widths grown on lattice-matched ZnO substrates by molecular beam epitaxy. Photoluminescence (PL) spectra show MQW emissions at 3.387 and 3.369 eV for the ZnO/ZnMgO MQW samples with well widths of 2 and 5 nm, respectively, due to the quantum confinement effect. Time-resolved PL results show an efficient photo-generated carrier transfer from the barrier to the MQWs, which leads to an increased intensity ratio of the well to barrier emissions for the ZnO/ZnMgO MQW sample with the wider width. From the power-dependent PL spectra, we observed no PL peak shift of MQW emission in both samples, indicating a negligible built-in electric field effect in the ZnO/$Zn_{0.9}Mg_{0.1}O$ MQWs grown on lattice-matched ZnO substrates.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.457-457
• /
• 2010

Flexible organic light emitting diodes (F-OLEDs) requires excellent moisture permeation barriers to minimize the degradation of the F-OLEDs device. Specifically, F-OLEDs device need a barrier layer that transmits less than $10^{-6}g/m^2/day$ of water and $10^{-5}g/m^2/day$ of oxygen. To increase the life time of F-OLEDs, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. Thus, $Al_2O_3/TiO_2$ multi-layer was deposited onto the polyethersulfon (PES) substrate by electron cyclotron resonance atomic layer deposition (ECR-ALD), and the water vapor transmission rates (WVTR) were measured. WVTR of moisture permeation barriers is dependent upon density of films and initial state of polymer surface. A significant reduction of WVTR was achieved by increasing density of films and by applying low plasma induced interlayer on the PES substrate. In order to minimize damage of polymer surface, a 10 nm thick $TiO_2$ was deposited on PES prior to a $Al_2O_3$ ECR-ALD process. High quality barriers were developed from $Al_2O_3$ barriers on the $TiO_2$ interlayer. WVTR of $Al_2O_3$ by introducing $TiO_2$ interlayer was recorded in the range of $10^{-3}g/m^2.day$ at $38^{\circ}C$ and 100% relative humidity using a MOCON instrument. The WVTR was two orders of magnitude smaller than $Al_2O_3$ barriers directly grown on PES substrate without the $TiO_2$ interlayer. Thus, we can consider that the $Al_2O_3/TiO_2$ multi-layer passivation can be one of the most suitable F-OLEDs passivation films.

• Archives of Pharmacal Research
• /
• v.18 no.2
• /
• pp.90-99
• /
• 1995

The effect of protein kinase C inhibitors, sturosporine and 1-(5-isoquinolinyl sulfonyl)-2-methyl piperazine(H7) on in vitro differentiation of erythroid progenitor cells which were isolated from spleens of mice infected with the anemia-inducing strain of Friend virus were examined. Erythropoietin-mediated differentitation of erythroid progenitor cells, as determined by the incorporation of $^{59}Fe$ into protoporphyrin, was inhibited by staurosporine and H7 in a concentration -dependent manner. Scatchard analysis of the $^3H-phorbol-12$, 13-dibutyrate binding to erythroid progenitor cells revealed that at the high affinity sites the dissociation constant was 22nM and the maximum number of $^3H-phorbol-12$, 13-dibutyrate binding to erythroid progenitor cells revealed that at the high affinity sites the dissociation constant was 22nM and the maximum number of $^3H-phorbol-12$, 13-dibutyrate binding sites per cell was approximately $3.7\times10^5$. Cytosonic protein kinase C was isolated from erthroid progenitor cells and then purified by sequential column chromatogrphy. Two isoforms of protein kinase C were found. Photoaffinity labeling of the purified protein kinase C samples with $^3H-phorbol-12$12-myristate 13-acetate followed by analysis of SDS-polyacrylamide gel electrophoresis (SDS-PAGE) and autofluorography showed radiolabeled 82-KDa pepticles. Rediolabeling of the 82-KDa peptides with $^3H-phorbol-12$myristate 13-acete was almost completely blocked by excess unlabeled phorbol 12-myristate 13-acetate was almost 12-muristate 13-acetate-promoted phosphorylation with the puyrified protein kinase C samples showed that the phosphorylation of 82-KDa peptides was increased as the concentration of phorbol 12-myristate 13-acetate was increased from $10^{-8}M{\;}to{\;}10^{-4}$M. In light of the findings that erythroid progenitor cells possessed an abundance of protein kinase C and that stauroporine and H7 inhibited erythroid differentiation, it seemed likely that protein kinase C would play a role in the erythroid progenitor cell development.

• Journal of Korean Dental Science
• /
• v.12 no.1
• /
• pp.13-19
• /
• 2019

Purpose: The aim of this study was to compare the flexural strength of provisional fixed dental prostheses which was three-dimensional (3D) printed by several build directions. Materials and Methods: A metal jig with two abutment teeth and pontic space in the middle was fabricated. This jig was scanned with a desktop scanner and provisional restoration was designed on dental computer-aided design program. On the preprocessing software, the build angles of the restorations were arranged at $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ and support was added and resultant structure was sliced to a thickness of $100{\mu}m$. Processed restorations were printed with digital light processing type 3D printer using poly methyl meta acrylate-based resin. After washing and post-curing, compressive loading was applied at a speed of 1 mm/min on a metal jig fixed to a universal testing machine. The maximum pressure at which fracture occurred was measured. For the statistical analysis, build direction was set as the independent variable and fracture strength as the dependent variable. One-way analysis of variance and Tukey's post hoc analysis was conducted to compare fracture strength among groups (${\alpha}=0.05$). Result: The mean flexural strength of provisional restoration 3D printed with the build direction of $0^{\circ}$ was $1,053{\pm}168N$; it was $1,183{\pm}188N$ at $30^{\circ}$, $1,178{\pm}81N$ at $45^{\circ}$, $1,166{\pm}133N$ at $60^{\circ}$, and $949{\pm}170N$ at $90^{\circ}$. The group with a build direction of $90^{\circ}$ showed significantly lower flexural strength than other groups (P<0.05). The flexural strength was significantly higher when the build direction was $30^{\circ}$ than when it was $90^{\circ}$ (P<0.01). Conclusion: Among the build directions $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ set for 3D printing of fixed dental prosthesis, an orientation of $30^{\circ}$ is recommended as an effective build direction for 3D printing.

• Korean journal of applied entomology
• /
• v.58 no.1
• /
• pp.77-83
• /
• 2019

This study was conducted to investigate the developmental characteristics of Propylea japonica Thunberg (Coleoptera: Coccinellidae) and its consumption of Myzus persicae nymphs at 3 constant temperatures (20.0, 25.0 and $30.0^{\circ}C$; $60{\pm}5%$ relative humidity; 14 h light : 10 h dark). The longevity of adult female P. japonica under 20, 25, and $30^{\circ}C$ was 134.0, 101.0 and 55.2 days, respectively. The total fecundity was 508.6, 875.6, and 383.4 eggs during its life span, respectively. The longevity of adult male P. japonica under 20, 25, and $30^{\circ}C$ was 128.8, 97.8, and 46.5 days, respectively. Average daily consumption of adult M. persicae by 1st, 2nd, 3rd, and 4th instar P. japonica at $25^{\circ}C$ was 2.2, 7.3, 14.5, and 29.1, respectively. The average daily number of M. persicae consumed by male and female P. japonica over their lifetimes was 35.0 and 42.9, respectively. Average daily consumption of adult Aphis gossypii by 1st-4th instar P. japonica at $25^{\circ}C$ was 2.2, 7.5, 13.9, and 29.5, respectively. The average daily number of A. gossypii consumed by male and female P. japonica over their lifetimes was 37.0 and 40.8, respectively.

• Science of Emotion and Sensibility
• /
• v.21 no.4
• /
• pp.37-42
• /
• 2018

This study was conducted to evaluate the effects of LED illumination and task difficulty on a person's long-term memory. Illumination levels of 400 lx and 1,000 lx were employed in this study, and task difficulty was set at learning 4 words (easy task) and 7 words (difficult task). The person's retention rate of the learned task was designated as a dependent variable. A total of 64 subjects participated in this study, and 16 participants assigned to each of the four sets of conditions. The results indicated that the retention rate for the difficult task under relatively dark 400 lx conditions was 68.49%, while and the retention rate was higher than 56.03% for 1,000 lx conditions. In addition, for the easy task, the retention rate was 67.97% and 56.55% for the 400 1x and the 1,000 1x conditions, respectively. However, the interaction between illumination and task difficulty was not statistically significant. The study results further suggested that long-term memory can be effective in relatively dark conditions and indirectly suggests that long-term memory may not follow the Yokers-Dodson law.

• (The)Study of the Eastern Classic
• /
• no.62
• /
• pp.263-289
• /
• 2016

Confucius, whose life coincided with the Warring States period of China, is one of the most respected sages in world history whose teachings and life produced countless disciples in China, Korea, and Japan. There are innumerable pictures, sculptures, and other artworks that portray memorable deeds of Confucius and interesting anecdotes that involve his pupils. One of the most popular subjects for these Confucian portrayals is the anecdote in which Confucius and his pupil, Zhi Ru, discover a tilting vessel at an ancestral shrine in the Lu dynasty and use it to understand the doctrine of the mean. The vessel becomes the basis for the famous Chinese expression, "the cautionary vessel beside one's seat," which is nowadays used to denote one's motto for life. Portraits of these tilting vessels can be divided between those showing the vessels only and others that show Confucius observing the vessels. The former serve as visual reminders, for rulers and policy makers, of the doctrine of the mean that is necessary to fair and righteous governance. The latter form part of the pictorial biography of Confucius with educational content and messages. Interestingly, portraits of Confucius observing or studying tilting vessels have been famous among members of the royal court and the literati, circulated either as single artworks or included in the folding screens of human portraits. Portrayals of other Confucian anecdotes are mostly found in albums that visualize the genealogy of the Way; in contrast, the portraits of Confucius and the tilting vessels were included in folding screens that were popular among the literati that enjoyed stylish works of art and antiques. The portraits of tilting vessels thus highlight the diverse functions and symbolic value of human portraits. This study classifies the portraits of tilting vessels into various forms, and analyzes the period-and objective-dependent changes and characteristics in these portraits. With its exploration of the diverse functions and aspects of portraits of Confucian anecdotes, this study will shed new light on how ancient artists reanimated the lives of great sages and how these artworks differ in their expressions and styles.