• 대한한의진단학회지
• /
• 제15권2호
• /
• pp.149-158
• /
• 2011

Objectives: The objective of this study is to compare the colour intensity of tongue body and that of tongue coat under the visible light and the ultraviolet light. Methods: We selected 7 subjects with completely or partially peeled tongue coat among the recruited 94 adults for the experiment. We took each tongue picture under the visible light and the ultraviolet light (315-400 nm) and then extracted sample images from the tongue body and tongue coat regions. Mean, median and mode of colour intensity from the sample images were calculated in 256 RGB system. Results: The green and the blue colour intensities of the tongue coats were significantly higher than those of the tongue bodies under the visible light. In all channels, the red, green and blue, the colour intensities of the tongue coats were significantly higher than those of the tongue bodies under the ultraviolet light. The colour differences between tongue coats and tongue bodies under the ultraviolet light were significantly higher than the colour differences under the visible light. Especially the colour difference under the ultraviolet light was highest in the green channel. Conclusions: We suggested that green colour image of the RGB system taken under the ultraviolet light could be used for more easy separating tongue coat region from tongue body.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.421-421
• /
• 2006

The light and energy-efficiency of classical liquid crystal displays is notoriously poor due to the use of absorption-based linear polarisers and colour filters. For instance, the light efficiency of PVAL polarisers is typically between 40 and 45 % and the colour filters have a typical efficiency below 35 % which results in a total light and energy-efficiency of the display below 10 %. In the past, a variety of polarizers were developed with an enhanced efficiency in generating linearly polarized light. Typically, these polarizers are based on the polarisationselective reflection, scattering or refraction of light i.e. one polarisation direction of light is directly transmitted to the LCD/viewer and the other polarization direction of light is depolarised and recycled which results in a typical efficiency for generating linearly polarized light of 70-85 %. Also, special colour filters have been proposed based on chiral-nematic reactive mesogens which increase the efficiency of generating colour. Despite the enormous progress in this field, a need persists for improved methods for generating polarized light and colour based on low cost optical components with a high efficiency. Here, the use of holographic phase gratings is reported for the generation of polarized light and colour. The phase grating are recorded in a photopolymer which is coated onto a backor frontlight for LCDs. Typically the recording is performed in the transmisson mode or in the waveguiding mode and slanted phase gratings are generated with their refractive index modulation at an angle between 20o and 45o with the normal of the substrate. It is shown that phase gratings with a high refractive index modulation and a high efficiency can be generated by a proper selection of the photopolymer and illumination conditions. These phase gratings coupleout linearly polarized light with a high contrast (> 100) and the light is directed directly to the LCD/viewer without the need for redirection foils. Dependent on the type of phase grating, the different colours are coupled-out at a slightly different angle which potentially increases the efficiency of classical colour filters. Moreover, the phase gratings are completely transparent in direct view which opens the possibility to use them in frontlights for LCDs. Holographic polarization gratings posses a periodic pattern in the polarization state of light (and not in the intensity of light). A periodic pattern in the polarization direction of linearly polarized light is obtained upon interference of two circularly polarized laser beams. In the second part of the lecture, it is shown that these periodic polarization patterns can be recorded in a linear photo-polymerizable polymer (LPP) and that such an alignment layer induces a period rotation in the director of (reactive and non-reactive) liquid crystals. By a proper design, optical components can be produced with only first order diffraction and with a very high efficiency (>0.98). It is shown that these diffraction gratings are potentially useful in projection displays with a high brightness and energy efficiency

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1821-1826
• /
• 2009

Liquid crystal display (LCD) devices contain a colour filter which can visualise colour images by transmitting or absorbing light. Colour properties of LCD mainly depend on colour materials such as pigments and polymeric binders. In this paper, colour properties were studied to improve colour quality of LCD. Generally, the colour properties can be classified into three categories which are colour purity, brightness and contrast ratio. For this study, photo resists were prepared by treatment of pigments and synthesis of polymeric binder. The treated pigments were dispersed and formulated with additives for preparing a photo resist that could be used for manufacturing colour filters. As a result of what we studied, type, mixture ratio and concentration of pigments were very important to improve colour purity of LCD device.

• 한국인터넷방송통신학회논문지
• /
• 제23권3호
• /
• pp.65-70
• /
• 2023

디지털 미디어 환경은 디지털 매체를 다각화시키면서 사용자 중심의 다양한 형태로 접근하고 있다. 디지털 기술의 발전에 의해 디지털 미디어 환경은 광대한 네트워크 정보망을 형성하고 보다 인터렉티브한 커뮤니케이션을 지원함으로써 이와 관련 사용자 중심의 기초 연구가 필요하다. 디지털 미디어 환경을 대표할 수 있는 모바일 디스플레이는 휴대성이 높은 장점을 갖고 있지만 소형화와 전력절감을 위해 얇은 디스플레이 패널과 저성능 이미지 센서를 채택하는 등 대형 디스플레이에 비해 색상 표현력이 떨어질 수밖에 없다. 본 연구에서는 대표적 디지털 융합 매체인 모바일 디스플레이를 구체적 연구대상으로 사용자 중심의 다크 모드와 라이트 모드에서 시감적 색채 인지특성에 대해 알아보고자 한다. 시감적 색채 인지 특성을 알아보고자 KS 12가지 색채를 기반으로 색채 속성을 각각 제어하여 정신물리학 실험을 진행하고 이를 분석하였다. 본 연구에서는 진행된 실험 결과를 분석하여 다크 모드와 라이트 모드에서 색채 인지에 차이가 있는지 알아보고 색채 인지 특성에 대한 기초 연구 자료로써 유의미 여부를 정의한 후 향후 연구방향을 제시한다.

• 대한한의진단학회지
• /
• 제16권1호
• /
• pp.9-18
• /
• 2012

Objectives The aim of this study is to propose an optimized tongue colour interpolation method to achieve accurate tongue image rendering. Methods We selected 60 colour chips in the chips of DIC color guide selector, and then divided randomly the colour chips into two groups. The colour chips of a group (Gr I) were used for finding the optimized colour correction factor of error and those of the other group (Gr II) were used for verifying the correction factor. We measured colour value of the Gr I colour chips with spectrophotometer, and took the colour chips image with a digital tongue image system (DTIS). We adjusted colour correction factor of error to equal the chip colour from each method. Through that process, we obtained the optimized colour correction factor. To verify the correction factor, we measured colour value of the Gr II colour chips with a spectrophotometer, and took the colour chips image with the DTIS in the two types of colour interpolation mode (auto white balance mode and optimized colour correction factor mode). And then we calculated the CIE-$L^*ab$ colour difference (${\Delta}E$) between colour values measured with the spectrophotometer and those from images taken with the DTIS. Results In auto white balance mode, The mean ${\Delta}E$ between colour values measured with the spectrophotometer and those from images taken with the DTIS was 13.95. On the other hand, in optimized colour correction factor mode, The mean ${\Delta}E$ was 9.55. The correction rate was over 30%. Conclusions In case of interpolating colour of images taken with the DTIS, we suggest that procedure to search the optimized colour correction factor of error should be done first.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.51-57
• /
• 1997

The lightness, chroma and hue tolerances with respect to the standard colour position in the CIELAB space have been studied in detail using the various existing data sets and the set form this study. The lightness tolerance showed a clear dependency upon the metric lightness for medium to light colour, but in the case of dark colours there was a discrepancy between the data sets. Both the chroma and hue tolerances showed dependency upon both the chroma and hue-angle and not the single dependency upon the metric chroma, as assumed in the CIE94 formula. New weighting functions were derived from the above experimental evidence, and finally a new formula, LCD(Leeds Colour Difference) was proposed. The LCD formula is nearly as simple and flexible as CIE94 but smoothes the individual weighting functions, especially for lightness tolerances for light colours and chromaticity discrimination near the blue region.

• Journal of Animal Science and Technology
• /
• 제64권3호
• /
• pp.432-442
• /
• 2022

The purpose of this study was to analyse the effects of light colour on rabbit reproductive performance and the expression of key follicular development genes. Rabbits (n = 1,068, 5 months old, 3.6-4.4 kg live body weight) were divided randomly into four groups, housed individually in wire mesh cages and exposed to red, green, blue, and white light-emitting diode (LED) light (control). The lighting schedule was 16 L : 8 D-15 d / 150 lx / 6:00 am-22:00 pm (3 d preartificial insemination to 12 d postartificial insemination). Red light and white light affected the conception rate and kindling rate and increased the total litter size at birth (p < 0.05). The effects of red light on litter size at weaning, litter weight at weaning, and individual weight at weaning increased compared with the green and blue groups. The effects of red light on live litter size at birth were increased compared with those in the blue group (p < 0.05). Compared to white light, green and blue light reduced the number of secondary follicles (p < 0.05). Compared to red light, green and blue light reduced the number of tertiary follicles (p < 0.05). Compared with white light, red LED light resulted in greater ovarian follicle stimulating hormone receptor and luteinizing hormone receptor mRNA expression (p < 0.05). Compared with green and blue LED light, red LED light resulted in greater B-cell lymphom-2 mRNA expression (p < 0.05). Compared with green LED light, red LED light inhibited FOXO1 mRNA expression in rabbit ovaries (p < 0.05). Red light can affect the reproductive performance of female rabbits and the expression of key genes for follicular development.

• 대한화학회지
• /
• 제8권4호
• /
• pp.142-146
• /
• 1964

The author proposed an equation of fading rate, expressed as ${\Delta}E$=${\Delta}E_{1{\infty}}({{1-e^{-k}}_1}^t)+k_2t$, where ${\Delta}E$=fading of dye (colour difference of N.B.S. unit), ${\Delta}E_{1{\infty}}$=extremity value of fading of molecularly dispersed dye, $k_1$, $k_2$=constants, t=exposure (hours). The validity of above equation, which is connected with the state of dye in fibre, was confirmed by experimental in a range of 2-3 colour fading in grey scale value for assessing change in colour visually, except the case of increasing the fading rate with the time resulted from the break-down of dye particles through the heat effect of light; it was also discussed about possiblity of evaluating of fastness to light of dye in early stage.

• 한국잠사곤충학회지
• /
• 제28권2호
• /
• pp.61-64
• /
• 1986

몇 종의 식물자료에서 추출한 염액으로 견을 염색하여 색채를 조사하고 염색견에 3종의 매염제처리를 한 후 세탁 및 내광견도를 조사한 결과는 다음과 같다. 1. Tannin계 및 뽕나무뿌리로 염색한 견포의 색채는 연한 다색계통이었으며 염색견포에 황산동 및 황산제일철로 매염처리하면 색상(Hue)은 염재의 종류에 따라 각각 다르게 변화되었고 명도 및 채도(V/V)는 모두 감소되었다. 2. Tannin계 및 뽕나무뿌리로 염색한 견포에 황산동 및 황산제일철로 매염처리하면 미매염견에 비하여 세탁견도가 1급내외 향상되었고 매염처리견의 자외선조사에 의한 dye-loss율이 미매염처리 견보다 크게 감소되어 내광견도가 향상되었다.

• Journal of Species Research
• /
• 제5권1호
• /
• pp.31-48
• /
• 2016

Twelve new species of two genera Smenospongia and Cacospongia (Demospongia: Dictyoceratida: Thorectidae) are described from Gageodo Island and Ulleungdo Island, Korea. Of these, ten new species of the Smenospongia are distinguished from the other nine reported species of the genus by the skeletal structure and sponge colour. Primary fibres of the genus Smenospongia are mostly dense, dark colour, and invisible inside of fibres, but they are mostly cored detritus and echinated with spicules. Especially, the end of primary fibres at the surface shows densely cored with spicules. All these new species changed the colour. Two new species of the genus Cacospongia are compared with nine other reported species. In skeletal structure, primary fibres of the genus Cacospongia are light colour, visible inside and more heavily cored with spicules and sands. The skeleton of this genus has large meshes. The colour of the genus Cacospongia does not change.