• 대한임상검사과학회지
• /
• 제53권4호
• /
• pp.326-332
• /
• 2021

면봉을 사용한 샘플링 방법은 의학, 생태학, 생명공학, 법의학 및 오염 정도 모니터링 시스템과 같은 다양한 연구 분야에서 유용하다. 샘플링에서 채취 시약은 중요한 요소 중 하나이다. 시료를 장기간 보관해야 하는 경우에는 시료 채취 키트와 시료 보관 온도가 매우 중요하다. 이 연구의 목적은 별도의 배지 없이, 세 가지 채취 시약과 세 가지 보관 온도가 살아있는 세균의 생균 수에 미치는 영향을 확인하는 것이다. 대표적인 환경 세균으로 E. coli와 S. aureus를 선정하였다. 증류수(DW), 멸균된 인산염 완충액(PBS), Tris-EDTA (TE) 버퍼를 채취 시약으로 사용하여 샘플링한 후, 22, 4, -70℃에서 보관을 진행했다. 각 채취시약 및 보관 온도가 시료에 미치는 영향은 RLU와 CFU로 결과로 비교하였다. -70℃ 보관 온도와 TE 버퍼를 사용할 때 CFU와 RLU 값은 다른 조건에서보다 일정하게 유지되는 경향이 보였다. 따라서 이 연구는 시료가 채취 직후 -70℃에서 보관되어야 하며, 채취 시약으로 TE 버퍼와 함께 사용하는 것이 좋다는 것을 시사한다.

• 한국유가공학회:학술대회논문집
• /
• 한국유가공기술과학회 2002년도 정기총회 및 제55회 추계심포지움 - 전환기 유가공 산업의 생존전략
• /
• pp.23-40
• /
• 2002

This study was conducted to investigate the quality changes of the UHT(ultra-high temperature), LTLT(law temperature long time) and HTST(high temperature short time) treated milk samples by storage conditions for 6 months from August 2000 to February 2001. The UHT treated milk samples collected from 3 plants(A, B and C) were stored at l0$^{\circ}$C and room temperature(dark and light exposure) for 6 months, and the LTLT and HTST treated milk samples(D and E) were also stored for 30 days. The UHT pasteurized milk of A, B and C plant was treated at 130$^{\circ}$C for 2-3s, 133$^{\circ}$C for 2-3s and 135$^{\circ}$C for 4s, respectively. The UHT sterilized milk of A and B plant was treated at 140$^{\circ}$C for 2-3s and 145$^{\circ}$C for 3-4s, respectively. The LTLT milk of D plant was treated at 63$^{\circ}$C for 30 mins, and the HTST milk of E plant was treated at 72$^{\circ}$C for 15s. All of the raw milk samples collected from storage tank in 5 milk plants were showed less than 4.0 X 10$^5$cfu/ml in standard plate count, and normal level in acidity, specific gravity, and component of milk. Preservatives, antibiotics, sulfonamides and available chloride were not detected in both raw and heat treated milk samples obtained from 5 plants. One(10%) of 10 UHT pasteurized milk samples obtained from B plant and 2 (20%) of 10 from C were not detected in bacterial count after storage at 37$^{\circ}$C for 14 days, but all of the 10 milk samples from A were detected. No coliforms were detected in all samples tested. No bacteria were also detected in carton, polyethylene and tetra packs collected from the milk plants. A total of 300 UHT pasteurized milk samples collected from 3 plants were stored at room(3$^{\circ}$C ${\sim}$ 30$^{\circ}$C) for 3 and 6 months, 11.3%(34/300) were kept normal in sensory test, and 10.7%(32/300)were negative in bacterial count. The UHT pasteurized milk from A deteriorated faster than the UHT pasteurized milk from B and C. The bacterial counts in the UHT pasteurized milk samples stored at 10$^{\circ}$C were kept less than standard limit(2 ${\times}$ 10$^4$ cfu/ml) of bacteria for 5 days, and bacterial counts in some milk samples were a slightly increased more than the standard limit as time elapsed for 6 months. When the milk samples were stored at room(3$^{\circ}$C ${\sim}$ 30$^{\circ}$C), the bacterial counts in most of the milk samples from A plant were more than the standard limit after 3 days of storage, but in the 20%${\sim}$30%(4${\sim}$6/20) of the milk samples from B and C were less than the standard limit after 6 months of storage. The bacterial counts in the LTLT and HTST pasteurized milk samples were about 4.0 ${\times}$ 10$^3$ and 1.5 ${\times}$ 101CFU/ml at the production day, respectively. The bacterial counts in the samples were rapidly increased to more than 10$^7$ CFU/ml at room temperature(12$^{\circ}$C ${\sim}$ 30$^{\circ}$C) for 3 days, but were kept less than 2 ${\times}$ 10$^3$ CFU/ml at refrigerator(l0$^{\circ}$C) for 7 days of storage. The sensory quality and acidity of pasteurized milk were gradually changed in proportion to bacterial counts during storage at room temperature and 10$^{\circ}$C for 30 days or 6 months. The standard limit of bacteria in whole market milk was more sensitive than those of sensory and chemical test as standards to determine the unaccepted milk. No significant correlation was found in keeping quality of the milk samples between dark and light exposure at room for 30 days or 6 months. The compositions of fat, solids not fat, protein and lactose in milk samples were not significantly changed according to the storage conditions and time for 30 days or 6 months. The UHT sterilized milk samples(A plant ; 20 samples, B plant ; 110 samples) collected from 2 plants were not changed sensory, chemical and microbiological quality by storage conditions for 6 months, but only one sample from B was detected the bacteria after 60 days of storage. The shelflife of UHT pasteurized milk in this study was a little longer than that reported by previous surveys. Although the shelflife of UHT pasteurized milk made a significant difference among three milk plants, the results indicated that some UHT pasteurized milk in polyethylene coated carton pack could be stored at room temperature for 6 months. The LTLT and HTST pasteurized milk should be sanitarily handled, kept and transported under refrigerated condition(below 7$^{\circ}$C) in order to supply wholesome milk to consumers.

• 생물환경조절학회지
• /
• 제23권4호
• /
• pp.356-363
• /
• 2014

몇가지 LED 광질이 고구마 바이러스 무병묘의 생장과 포장생육 및 수량에 미치는 영향을 조사하였다. '신황미', '연황미', '맛나미' 등 3품종의 바이러스 무병묘를 20일간 담액수경 재배하여, 자연광하에서 10일간 순화시켜 30cm 크기의 삽수를 $75{\times}25cm$로 6월 10일 정식하여 흑색비닐로 멀칭재배하였다. LED 광질은 형광등(40W)을 대조구로 하여 적색(660nm), 청색(460nm), 적+청 8:2 및 적+청 7:3 혼합광을 사용하였다. 묘소질은 적+청(7:3) 혼합 LED에서 줄기신장, 줄기두께, 잎수 및 뿌리발달 등이 양호하여 건묘육성에 가장 효과적이었다. 정식 30일후, 포장 생존율은 적:청(7:3) 혼합 LED에서 형광등과 적색 LED보다 유의하게 높았으며, 품종간 차이는 없었다. 줄기길이, 줄기두께, 마디수 등의 지상부 생육특성도 LED 광질 및 품종간에 유의한 차이가 없었다. 정식 120일후 지상부 생육특성에서도 줄기길이, 줄기두께, 마디수, 곁가지수, 생체중 등에서 LED 광질에 따른 유의성은 인정되지 않았으며, 줄기길이, 마디수, 줄기두께, 생체중 등에서 품종간에 유의한 차이를 보였다. 주당평균중, 평균괴근중 및 수량 등은 LED 광질에 따른 차이가 없었으며, 품종간에는 유의한 차이를 보였다. 품종간 수량은 '맛나미'와 '연황미'에서 '신황미'보다 유의하게 높았다.

• 대한화장품학회지
• /
• 제49권2호
• /
• pp.159-167
• /
• 2023

이산화티타늄(TiO₂)은 일반적으로 선크림 제제에 사용되어 빛의 물리적 산란 작용에 의해 피부 표면을 보호하고 유해한 자외선(UV)의 침투를 방지한다. 그러나 불활성 미네랄 성분으로 인해 피부에 사용시 백탁현상을 유발할 수 있다는 단점이 있다. 또한 백탁현상을 없애기 위해 TiO₂ 입자를 나노화 하면 가시광선 투과율을 증가시켜 백탁 현상을 감소시키지만 알레르기 염증과 같은 심각한 피부 트러블을 유발할 수 있다. 이러한 문제를 극복하기 위해 본 연구에서는 산소 결핍 구조 및 질소량 제어를 이용하여 TiO₂의 밴드갭을 제어하고, 결과적으로 피부 맞춤형 유색 TiO₂를 개발하였다. 이는 백탁 현상을 감소시킬 수 있을 뿐만 아니라 활성산소를 유발하여 피부 노화를 촉진시키는 것으로 알려진 블루라이트를 효과적으로 차단할 수 있다. 본 연구에서 제안된 밴드갭 제어 TiO₂ 화합물은 저자극이고 스펙트럼이 넓으며 환경친화적이다. 또한 이는 자외선 차단제의 sun protection factor (SPF)를 획기적으로 향상시켜 블루라이트 차단 제품에 적용할 수 있을 것으로 기대된다.

• 공업화학
• /
• 제21권5호
• /
• pp.522-526
• /
• 2010

축열이용기술은 열저장효과를 이용하여 냉난방 부하가 적을 때 남는 열을 저장하였다가 부하가 증가할 때 이용하는 방법으로써, 열저장 물질의 온도이용 특성에 따라 현열축열과 잠열축열로 구분한다. 잠열축열은 특정 온도 범위에서 상변화 할 때 높은 잠열을 갖는 물질을 이용하여 열을 저장하는 방법으로 동일한 열저장을 위해 소요되는 공간 크기가 현열 축열에 비하여 작아지게 되고 일정한 온도범위에서 열의 흡수 및 방출이 가능한 특성이 있다. 본 연구는 건축물의 냉난방시 소요되는 에너지를 절약하기 위하여 상온 상변화물질을 축열재로 사용하여, 건축자재로 범용적으로 사용되고 있는 시멘트, 석고 등에 적용하고자 하였다. 제조된 물질이 에너지절약성능은 물론 건축자재로서 필요한 물성을 갖추기 위하여 최적배합 방법 및 비율을 도출하고자 하였다. 그에 따라 중량비로 3% 들어간 축열모르타르의 냉각지연효과는 약 19%로 나타났다.

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.13-18
• /
• 2008

Scratches are observed on a polymer cover-layer of near-field recording (NFR) media after a servo test with rotating disc. The scratches are formed by the collision of a solid immersion lens (SIL)-media. One of the possible ways to avoid the scratch problem is to coat a dielectric protective film on the polymer cover-layer which enhances the hardness of the surface. The surface with hard characteristics in the surface reduces the scratch problem in the cover-layer. Not only the mechanical properties but also the optical properties should be controlled. Specifically, the refractive index of the dielectric protective film should be matched with the polymer cover-layer not to lose light at the interface due to the difference of the refractive index. The refractive index of the dielectric film can be tailored by controlling process parameters during sputtering and matched with that of the polymer cover-layer.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1790-1795
• /
• 2008

Energy scavenging is a technique that converts ambient energy, for example, vibration and light, to electrical energy in order to supply power to low power electronic devices such as ubiquitous sensors. In this paper, we propose an optimal operation condition of power delivery circuit and design strategy for energy scavenging system in which the generated power is order of microwatt and, consequently, efficient handling of power is critical. We also propose that high data transmission rate is more realistic optimal design objective rather than high energy efficiency. It is shown that disconnection of load from the storage capacitor right after data transmission reduces energy wasting and that optimal value of storage capacitor can be determined at this condition. The feasibility of our propose is proved by experiments and we believe that the proposed design strategy will promote the application of piezoelectric micropower generator to the ubiquitous sensor networks.

• International journal of advanced smart convergence
• /
• 제9권3호
• /
• pp.253-259
• /
• 2020

Most of today's large-scale cloud systems and enterprise data centers are distributing resources to improve scalability and resource utilization. NVMe-over-Fabric protocol allows submitting NVMe commands to a remote NVMe SSD through RDMA (Remote Direct Memory Access) network. It is attracting attention recently because it is possible to construct a disaggregation storage system with low latency through the protocol. However, the current I/O stack of NVMe-over-Fabric has an inefficient structure for maintaining compatibility with the traditional I/O stack. Therefore, in this paper, we propose a new mechanism to reduce I/O latency and CPU overhead by modifying I/O path of NVMe-over-Fabric to pass through legacy block layer. According to the performance evaluation results, the proposed mechanism is able to reduce the I/O latency and CPU overhead by up to 22% and 24% compared to the existing NVMe-over-Fabrics protocol, respectively.

• 설비공학논문집
• /
• 제19권4호
• /
• pp.328-332
• /
• 2007

A superconducting magnetic energy storage (SMES) system has shorter response time and longer life time, and is more economical, and environment-friendly than other uninterruptible power supply (UPS). A conduction cooling system is well answer for the high temperature superconductor (HTS) SMES system. Because the conduction cooling system is simple, light and small structure. The purpose of this paper is to design and verify the effective conduction cooling system for the HTS SMES system. The analysis of heat loads in cryostat is performed. Thermal shield heat loads, temperatures of HTS coil surface and conduction Cu plate are estimated and measured.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1063-1064
• /
• 2008

We have discovered a new single-layer environmental barrier for OLEDs. In storage at $65^{\circ}C$ and 85% relative humidity, OLED pixels encapsulated with this barrier have half-lives of approximately one year. We describe the fabrication and properties of the barrier, and results of accelerated storage tests.