• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.243-247
• /
• 2009

A Radioactive constraint of the nuclear fuel assembly irradiated by neutron during normal operation cycle of the nuclear power plant is typically on the order of about 3 kGy/h. In order to inspect nuclear fuel assembly using a VT (vision technology) system, the light such as halogen lamp is used. As the halogen lamp has lower color temperature than the sun light, the objects under halogen lamp illumination are seemed to be tinted with red. In this paper, high brightness LED is considered to be used as the light source of VT system. The high brightness LED, which is a key light source of the VT system, have been gamma irradiated at the dose rate of 4 kGy/h during two hours up to a total dose of 8 kGy. The radiation induced color-center in the LED housing cap made of plastics materials is observed.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 1998년도 봄 학술대회 발표논문집 디자인 학 연구
• /
• pp.66-67
• /
• 1998

• 한국표면공학회지
• /
• 제47권5호
• /
• pp.233-238
• /
• 2014

In this paper, in order to achieve slim and light liquid crystal display, we examine the optical conditions that can obtain uniform light with higher optical efficiency over whole light guide plate (LGP) through simulation. Furthermore, to overcome the issues of hot spot in front of red, green, and blue light emitting diodes (RGB LEDs) source and non-uniform color mixing, we propose four shaped color mixing bars tied up with the LGP and check the optical characteristics of the LGP with them by simulation. Consequently, we could know the optical conditions of improving optical efficiency and optical uniformity in the LGP through the optical design. Also we confirmed that the issues of the hot spot and non-uniform color mixing in edge type LED could be solved by using the ${\bigwedge}$-shaped window color mixing bar.

• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.64-68
• /
• 2015

In this paper, LED lighting system is realized by using Bluetooth wireless communications and smartphones. A bluetooth module with a lighting control function is manufactured by miniaturizing a development board of TI company and the volume of LED dimming system as a whole is reduced. And a trial product is materialized by designing a hardware composed of the manufactured bluetooth module, LED down light equipped with degree warm white and cool white, and 2-channel LED driver; and LED dimming software. The materialized trial product is controled in terms of the brightness and color temperature of LED light source using an application of a smartphone. The experiment showed that the users can easily control the intensity of illumination of LED light source by using the scroll bar of the applications of smartphones. In addition, the color temperatures of both warm white and cool white can be controlled, and when the color temperature of the trial product using the manufactured bluetooth module is compared with that of a trial product of TI company, they show the same color temperatures.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.452-457
• /
• 2011

The internal temperature of an operating room had to keep within $20^{\circ}C$. However, the doctor who is wearing operating gown and mask caused to rise temperature because of the thermal occurrence of dental LED light source. At first, the surgery environment is getting worse. And then last, it would increase bleeding rate by the expansion of patient's exposured blood vessel. A surgical operator can distribute the patient's tissue through such surgery environment, exactly. It can do accurate surgery. So, it gave to effect that surgical operator's eye condition is getting better and it could keep a mutual assistance system. For this research, we develop the LED dental light source module of high color rendition. It performed simulation for replacing established the method of Halogen lamp and Plazma lamp of light source. We analyzed intensity of illumination and the change of viability by changing the height of light source module.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1673-1674
• /
• 2006

The most ideal light source known to the mankind is sunlight. Therefore, whenever an artificial light source is needed in a dark place such as in a shadowed houses, the utmost goal is to find an artificial light characteristics of which approaches that of sunlight. On this ground, we have investigated a Neodymium lamp as a possible substitute for sunlight. Especially, the local and the color rendering, a life expectancy, and the overall efficiency are carefully studied.

• 한국실내디자인학회논문집
• /
• 제21권6호
• /
• pp.129-136
• /
• 2012

As the importance of eco-friendly and energy saving issues are emphasized in lighting as consciousness about energy saving is elated worldwide, demand for natural resources such as gas increases, supply of LED lighting is spread. Owing to white LED's development and price fall. It is expected to LED High Luminance Emitting Diode. LED's brightness and long life-time that surpass fluorescent light in the latest as well as is used by back light source of thin film LCD, low electric power attrition rate by advantage do and widen the market at the world lighting lamp market that is potential market. Accordingly, study about suitability of LED lighting is activated but space that apply actual LED lighting fixtures yet is less and advanced researches about LED fixtures' applied apaces are slight compared to existing light source up to now because is not many on this. The result of the experiment shows similar tendency with the existing light sources'. Through a psychological reaction experiment in the LED lighting experiencing space that can control of color temperature and lighting level, this study is wished to use to the data for lighting design of space that LED lighting fixtures are applied hereafter.

• 방송공학회논문지
• /
• 제15권4호
• /
• pp.461-473
• /
• 2010

최근 녹색 성장과 에너지 절감 방안이 크게 대두하면서 친환경과 절전형 광원으로 평가받는 LED 조명에 대한 관심이 급증하고 있다. 특히 LED 조명의 높은 효율성과 긴 수명, 소형 박형화에 따른 조명기구의 공간 효율성, 디지털 디밍(Dimming)에 의한 다양한 연출 효과 등의 장점이 있어 방송제작 현장에서도 미래 방송조명의 광원으로 기대되고 있다. 본 논문에서는 CIE의 기준에 따른 측광 방법으로 방송용 조명의 기본적인 광원특성을 용도별, 조명기구별로 측정하였다. 이를 바탕으로 기존 방송조명과 LED 조명의 분광분포 특성 및 연색성 등에 대한 비교 분석으로 LED 조명의 활용을 위한 기초자료를 확보하였다. 한편, 그림자 투영 실험과 색 재현성 실험을 통하여 LED의 새로운 광원에 의한 TV 조명이 고품질을 요구하는 방송영상에 미치는 영향과 문제점에 대한 개선방안을 제안한다.

• 복식문화연구
• /
• 제15권2호
• /
• pp.214-220
• /
• 2007

The purpose of this study is to derive the use of the luminous source corresponding to the intention and contribute to product display by visually evaluating the relations between luminous source and colors, analyzing and reviewing the subjective perceptions depending on the luminous source, and clarifying the colors of artificial luminous source that look close to natural lights by each color. Hence, the researcher objectified the subjective evaluation for which they used sensory evaluation method with four colors of luminous sources(natural colors, 2800K, 4200K, and 6500K) and five colors of textiles(purple, blue, green, yellow, and red) by quantifying the evaluation. As a result, we could obtain the conclusion as follows. As for the temperature of textile colors under artificial luminous sources that appeared most close to the colors of textiles under natural luminous sources, 6500K was most frequent, and the temperature of the luminous sources that appeared most different was 2800K. However, as there were also 4200K colors that looked most close to the textile colors under natural light source, it was observed that the temperature differs depending on the textile colors. In addition, less glossy textiles exhibited more visual changes by luminous source colors than comparatively more glossy textiles, and it was observed that the most influenced color was purple, as purple has shown the largest difference among colors.

• 한국인쇄학회지
• /
• 제22권1호
• /
• pp.9-18
• /
• 2004

Recently as color image processing to be become independent have been desired at the light source in an image processing and it have been enlarged. An image processing of the light source which is become independent means an image processing which uses a spectral reflectance information. We improved it in the spectral reflectance estimation method which uses existing 3-band image in this research that the improvement of an identity color population generation method which uses the hue angle and the processing speed improvement and introduces a labelling method. The precision of a spectral reflectance estimation appeared to the ${\Delta}E^*_{ab}$ of an average 2.7 comparing with the measurement price. The practical use possibility came to be fast and appeared a processing speed compared with existing method.