• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.616-621
• /
• 2003

The white-light-emitting organic LED with two-wavelength was fabricated using blue emitting material(DPVBi) and a series of orange color fluorescent dye(Rubrene) by vacuum evaporation processes. The basic structure of white-light-emitting OLED was ITO/NPB(150$\AA$)/DPVBi(150$\AA$)/Alq$_3$:Rubrene(150$\AA$)/BCP(100$\AA$)/Alq$_3$(150$\AA$)/Al(600$\AA$). The changes of the CIE coordiante strongly depended on the doping concentration of Rubrene and the thickness of NPB layer. We obtained the white-light-emitting OLED close to the pure white color light and the CIE coordinate of the device was (0.315, 0.330) at applied voltage of 13V when the doping concentration of Rubrene was 0.5wt% and the thickness of NPB layer is 200$\AA$. At a current of 100mA/$\textrm{cm}^2$, the quantum efficiency was 0.35%.

• 한국방사선학회논문지
• /
• 제17권4호
• /
• pp.523-529
• /
• 2023

우수한 공간분해능을 달성하기 위해 소동물용 양전자방출단층촬영기기의 검출기에는 매우 작은 섬광 픽셀을 사용한다. 그러나 이러한 매우 작은 섬광 픽셀을 사용함으로써 배열의 가장자리 부분의 섬광 픽셀들이 평면 영상에서 중첩되는 현상이 발생할 수 있다. 이를 해결하기 위해 빛의 분포를 변화시킬 수 있는 광가이드를 사용하였다. 광가이드의 물질에 따라 빛이 퍼지는 경향이 달라지며, 이에 따라 어떠한 물질의 광가이드를 사용하느냐에 따라 겹침의 발생 유무가 달라진다. 본 연구에서는 기존의 유리 광가이드를 대신하여 섬광 픽셀과 동일한 물질의 광가이드를 적용한 검출기를 설계하였다. 섬광체 광가이드는 유리 광가이드에 비해 더 높은 굴절률을 지녀, 빛의 퍼지는 정도가 달라진다. 두 광가이드를 사용한 검출기의 가장자리 부분의 섬광 픽셀들의 분리 정도를 평가하기 위해 평면 영상을 획득하였다. 획득한 평면 영상의 가장자리 두 섬광 픽셀 영상의 공간분해능과 중심 간의 거리를 산출하여, 분리 정도를 평가하였다. 그 결과 섬광체 광가이드를 사용하였을 경우, 더 우수한 공간분해능을 보였으며, 섬광 픽셀들의 중심 간의 거리가 더 넓게 나타났다. 기존에 사용하는 유리 광가이드 대신에 섬광체 광가이드를 사용하여 검출기를 구성할 경우 더 작은 섬광 픽셀을 사용할 수 있으므로, 더 우수한 공간분해능을 확보할 수 있을 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.2899-2905
• /
• 2011

We have demonstrated that TPyPA can be used as an efficient multi-functional material for OLEDs; hole transporting material (HTL), blue and white-light emitter. The device based on TPyPA as the HTL exhibited an external quantum efficiency of 1.7% and a luminance efficiency of 4.2 cd/A; these values are 40% higher than the external quantum efficiency and luminance efficiency of the NPD-based reference device. The device based on TPyPA as a blue-light emitter exhibited an external quantum efficiency of 4.2% and a luminance efficiency of 5.3 $cdA^{-1}$ with CIE coordinates at (0.16, 0.14), the device based on TPyPA as a white-light emitter exhibited an external quantum efficiency of 3.2% and a luminance efficiency of 7.7 $cdA^{-1}$ with CIE coordinates at (0.33, 0.39). Also, TPyPA-based organic solar cell (OSC) exhibited a maximum power conversion efficiency of 0.35%. TPyPA-based organic thin-film transistors (OTFTs) exhibited highly efficient field-effect mobility (${\mu}_{FET}$) of $1.7{\times}10^{-4}cm^2V^{-1}s^{-1}$, a threshold voltage ($V_{th}$) of -15.9 V, and an on/off current ratio of $8.6{\times}10^3$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.240-240
• /
• 2009

We developed the low level laser therapy(LLLT) apparatus for external injury cure using a GaAsP Diode. This equipment was fabricated by using GaAsP diode and a microcontroller, and designed to enable us to control light irradiation timer, and frequency. In this paper, the designed device was used to find out how GaAsP diode light source affects the skin wound of RAT. In the experiment, $1cm^2$ wounds on the External injury of RAT were made. Light irradiation RAT and none light irradiation RAT divided, each RAT was irradiated 20 min a day for 9 days. In result, compared with none light irradiation RAT, the lower incidence of inflammation and faster recovery was shown in light irradiation RAT.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.139-142
• /
• 2000

Displacement current was generated in the light stimulus. Solution of azobenzene molecules (8A5H) have to character trans-to-cis. The Maxwell displacement current measuring technique has been applied for the investigation of azobenzene organic thin films under alternating photoirradiation with ultraviolet($\lambda_1$) and visible($\lambda_2$) light. also, As laser beam(630~670nm) investigate light response. As result, ultraviolet($\lambda_1$) and visible($\lambda_2$) light see photoisomerization response, but laser beam not appear photoisomerization in current that differ wave range reagent.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.347-348
• /
• 2006

This paper performed the basic study for developing the Photodynamic Therapy Equipment for medical treatment. The equipment have been manufactured by using the High Bright Light Emitting Diode and TLC5941 integrated circuit. As a result, 630nm Light Emitting Diode Module was made for the optimization of irradiation condition. And we confirmed the current change according to increase of the level of Light Emitting Diode Module.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.346.2-346.2
• /
• 2014

To use the GaN based light-emitting diodes (LEDs) as solid state lighting sources, the improvement of light extraction and internal quantum efficiency is essential factors for high brightness LEDs. In this study, we suggested the new materials system of a zinc tin oxide (ZTO) layer formed on blue LED epi-structures to improve the light extraction. ZTO is a representative n-type oxide material consisted of ZnO and SnO system. Moreover, ZTO is one of the promising oxide semiconductor material. Even though ZTO has higher chemical stability than IGZO owing to its SnO2 content this has high mobility and high reliability. After formation of ZTO layer on p-GaN layer by using the spin coating method, structural and optical properties are investigated. The x-ray diffraction (XRD) measurement results show the successful formation of ZTO. The photoluminescence (PL) and absorption spectrum shows that it has 3.6-4.1eV band gap. Finally, the light extraction properties of ZTO/LED chip using electroluminescence (EL) measurement were investigated. The experimental and theoretical analyses were simultaneously conducted.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.878-884
• /
• 1998

We have investigated that the monodomain alignment of nematic liquid crystal (NLC) is obtained with polarized ultraviolet(PUV) light irradiation on polyimide (PI) surface. The LC alignment capability increases with increasing the UV light irradiation time. The polarized UV light irradiation on oblique angle of 60。 irradiated on PI surface rotated by 90。 at 10 min. after being normally irradiated on PI surface at 30 min., the generated pretilt angle of NLC is about 2.5。. The pretilt angle of NLC is attributed to the interaction between the LC molecules and the asymmetric triangular structure of polymer surface due to photo-depolymerization of polymer with the oblique UV light on PI surface. The voltage -transmittance and response time characteristics of photo-aligned twisted nematic (TN)-LCD with UV light irradiation time 60 min. were almost same in comparison with the rubbing-treated TN-LCD.

• Journal of Ginseng Research
• /
• 제12권1호
• /
• pp.87-91
• /
• 1988

일복개량의 일환으로 일복의 피복재선택을 위한 기초자료를 얻고자 적색광, 청색광 및 백색광하에서 미국인삼(Panax quinquefolin L.)의 광합성을 측정하였다. 광질별 광합성량은 전반적으로 적색과, 백색광 및 청색광 순으로 많았으며 그 광합성량의 차이는 조도가 증가할수록 감소되었다. 따라서 일복의 피복물 색상은 적색으로 하는 것이 인삼(미국인삼) 생육에 유이할 것임을 시사되었다.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.429-434
• /
• 2002

In this paper, multiheterostructure white organic light-emitting device was fabricated by vacuum evaporation. The structure of white organic light-emitting device is ITO/CuPc/TPD/DPBi:DPA/$Alq_3/Alq_3$:DCJTB/BCT/$Alq_3$/Ca/Al. Three primary colors are implemented with DPVBi, Alq$_3$and DCJTB. The maximum EL wavelength of the fabricated white organic light-emitting device is 647nm. And the CIE coordinate is (0.33, 0.33) at 13 V. In the fabrication of white organic light-emitting devices with DCJTB, $Alq_3$, DPVBi, the EL spectrum has two peaks at 492nm, 647nm. Two peaks appeared because the blue light is combined with green light. The maximum wavelength of red light is not changed with applied voltage. After voltage applied, for the first time, the electrons met the holes in the red emission layer and emitted red light. And then the electrons moved to the green emission layer, and blue emission layer continuously. Finally, when all of the emission layer activated, the white light is emitted.