• 농촌의학ㆍ지역보건
• /
• 제12권1호
• /
• pp.36-53
• /
• 1987

It is utmostly important to establish the efficient fitable way of peoples' active participation in primary health care especially in the areas where the public or governmental service input for the basic health care is insufficient like as in rural areas of Korea. In light of above reason, this study focused mainly on the evaluation of roles and activities of village health workers (VHWs) who were selected from grass- root level of village people in order to derive further motivation for active participation. This is believed to be a sort of feedback mechanisms. Actually, the authors collected the activity reports of VHWs who had been devoting themselves in the primary health care services of Jeomdong Area, of Yeoju Gun one of Korea University Community Health Action Programmes and survey record on the VHWs activity from correspondent people. 1 hose data were analyzed through computer programmed package. The activities performed by VHWs were limited to the performance in 1985 for conveniance. The summarized results were as follows; 1) General characteristics of VHWs. Among a total of 28 VHWs in the area, about 39.3g of them have been replaced up to the date since the implementation in 1983, because of moving out, occupational employment and of others. The age of majority (75.0%) lied between the range of 30-50, and educational background of 67.9% belonged to category of primary school graduation, about 50% of them experienced to be or were also entiled "chief of women club" of corresponding villages. 2) Work-load of VHWs. Each VHW was assigned for tasks of health care for average 55 households of 248 persons. They shared approximately 6 days a month for the activity in average and it covered 17 cases of basic health care in a month. A half of the VHWs performed home visits irregularly without solidified schedule. 3) Work performance analysis. Informations collected through VHWs were compared with data from official vital registration at local administration center "Myon Office" in 1985. VHWs collected 100.8 of new born, 116.2 of death, 58.3 of move in and 74.8 of move out in comparison with 100.0 of official registration each. Pregnant women of 79.8% of mothers among the total pregnancy of 94 which were confirmed as normally delivered or aborted cases by all means afterwards had been detected by VHWs as being pregnant and all of them received some of antenatal cares by VHWs. All(100%) of delivered women were detected by VHWs through home visits and they were cared postnatally. Whereas, according to the records of birth registration, the places of delivery were clinic in 33.7%, and mother's home in 66.3%, VHWs reported them to be clinic in 48.9%, midwifery in 20.2%. It was cleared that most of misinformation was caused by uncautious filling of birth registration at notification. Among the total of 717 eligible women under age 44 years, family planning status of 92.6% was reported by VHWs confirming practice of control to be 70.8% of reported fertile women. 4) Attitude of VHW on the roles and functions. Although 92.0% of VHWs expressed VHWs to be worthwhile, only 52.0% of them had dignity and satisfaction in their activity and 44.0% of them had passive attitude of working saying they followed direction regardlessly. Concerning difficulties in performance as a VHW, 60.7% of them pointed out lacking of medical and health related knowledge by themselves. Still, 64.0% of them thought visiting unfamilier house to be awful and 40.0% complained forms of activity to be difficult and hard. It was also revealed that 56.6% confessed lack of interest on community health service itself. Most of VHWs needed more educational training especially on clinical fields such as cares of gynecological diseases, hypertension, diabetes, and other chronic diseaes of the aged. Regular on-the-job basic trainings were said to be needed twice a year.

• 생물환경조절학회지
• /
• 제21권2호
• /
• pp.79-87
• /
• 2012

본 연구는 온실의 난방 에너지 절감을 목적으로 온실 내부에 알루미늄 온수배관을 설치하여 난방효과에 대한 기초자료를 구축하고자 수행되었다. 그 연구결과를 요약하면 다음과 같다. 전체 실험을 포함하여 온실내의 높이별 온도편차는 4.0~$7.0^{\circ}C$ 정도의 범위로서 그 차이가 크게 나타났다. 팬코일유니트(FCU)를 작동시킨 경우가 작동시키지 않은 경우에 비해 유출입수의 온도차가 $3.3^{\circ}C$ 정도 크고, 소비전력량은 36.2~40.1%정도 증가하였으며, 시간당 방열량은 44.6~52.0% 정도 증가하는 것으로 나타났다. 실험기간동안 순환유량은 0.48~$0.49L{\cdot}s^{-1}$ 정도의 범위에 있었고, 평균유속은 1.53~$1.56m{\cdot}s^{-1}$ 정도였다. 유출입수의 평균 온도차는 6.24~$11.50^{\circ}C$이었다. 최저 외기온 -14.0~$-0.6^{\circ}C$ 범위에서 설정온도별 방열량은 135,930~307,150kcal 정도의 범위로서 시간당 9,610~$19,630kcal{\cdot}h^{-1}$ 정도의 범위에 있었다. 이것은 최대난방부하의 약 23~53% 정도의 난방에너지를 공급할 수 있을 것으로 나타났다. 전체 방열량과 소비전력량은 각각 2,548,306kcal 및 3,075.7kWh이다. 화석연료인 경유로 난방할 경우, 소요되는 경유의 총 소비량은 281.6L 정도이고 비용은 321,000won인 것으로 나타났다. 농가용 전력요금을 적용하면 전력사용에 대한 총비용은 110,730won 정도로서 경유 소비 비용의 33.5% 정도로 나타났다. 실험구의 온도가 대조구보다 약 8.3~$14.6^{\circ}C$ 정도 높게 나타났다.

• 자원환경지질
• /
• 제26권2호
• /
• pp.129-134
• /
• 1993

장군광산산 보울란저라이트는 침상이나 불규칙한 형태로 방연석, 차골석, 함은 사면동석과 밀접하게 공생하여 남광상에서 산출되며, 특히 남광상 A광체와 B광체 주변의 능망간석대에 그 산출이 뚜렷하다. 어떤 장소, 특히 남광상 B광체 상부에는 방연석, 황철석, 유비철석, 함망간 방해석, 석영 등과 공생하여 작은 정동중에 "머리털"이나 "깃털"모양의 보울 란저라이트 집합체를 형성하기도 한다. 이광물의 반사색은 녹회색을 띠고, 반사다색성은 차골석보다 강하고 이방성이 명료하다. 반사율은 공기중에서 파장이 560nm 일 때 $R_{max.}=42.3%$, $R_{min.}=35.7%$이고, 비커스경도 (VHN)는 50g의 하중에서 $146{\sim}173kg/mm^2$이다. 표준시약 (Short, 1941)에 의한 반응에서는 HN03에서는 즉시 흑색으로 변하지만, 그외의 시약과는 거의 반응하지 않는다. 8개 시료 23개 입자에 대하여 EPMA로 분석한 결과 $Pb_{56.1}Sb_{25.1}S_{18.5}$, Total 99.6 wt.%이고, S= 11로해 계산된 화학식은 $Pb_{5.16}Sb_{3.94}S_{11}$로서 거의 보울란저라이트의 이상적인 화학식 $Pb_5Sb_4S_{11}$을 만족하고 있다. X-선 회절분석에 의해 얻어진 X-선 회절패턴에 나타나는 주요한 회절선은 $3.73\;{\AA}\;(10)$, $3.22\;{\AA}\;(5)$, $3.03\;{\AA}\;(4)$, $2.82\;{\AA}\;(5)$로서 공간군 $C^5_{2h}-P2_{1/a}$ 과 잘 일치한다. 이상의 장군광산산 보울란저라이트는 그 산출상태와 광물의 공생관계로부터 열수성 연-아연-은광화작용의 최후기에 생성된 광물로 판단된다.

• 설비공학논문집
• /
• 제27권7호
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• 설비공학논문집
• /
• 제25권6호
• /
• pp.346-361
• /
• 2013

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.

• 한국진공학회지
• /
• 제20권6호
• /
• pp.395-402
• /
• 2011

원자힘 현미경을 이용하여 실리콘 기판 위에 증착된 실리콘 나노선과 리튬화된 실리콘 나노선의 나노기계적 성질을 연구했다. 금 촉매를 사용하여 스테인리스 기판 위에서 증기-액체-고체 과정을 통해 실리콘 나노선을 합성하였다. 완전히 리튬화된 실리콘 나노선을 얻기 위해서 전기 화학적 방법을 사용했고, 이를 실리콘 기판 위에 증착하였다. 접촉모드 원자힘 현미경으로 측정된 표면 거칠기는 실리콘 나노선에서 $0.65{\pm}0.05$ nm에 비해 리튬화된 실리콘 나노선에서 $1.72{\pm}0.16$ nm으로 더 큰 값을 보여주었다. 탐침과 표면 사이의 접착력에서 리튬화의 영향을 조사하기 위해 힘 분광기법을 사용했다. 실리콘 나노선의 접착력이 실리콘 기판과 ~60 nN으로 흡사한 반면에, 리튬화된 실리콘 나노선은 ~15 nN으로 더 작은 값을 나타냈다. 또한, 탄성적으로 부드러운 무정형 구조 때문에 국부적 탄성 스프링 상수도 실리콘 나노선 66.30 N/m보다 완전히 리튬화된 실리콘 나노선이 16.98 N/m으로 상대적으로 작았다. 실리콘 나노선과 완전히 리튬화된 실리콘 나노선에서 탐침과 표면 사이에 마찰력의 수직항력 의존성과 스캔 속도 의존성을 조사하기 위하여 각 0.5~4.0 Hz와 0.01~200 nN으로 측정했다. 본 연구에서 실리콘과 리튬화된 실리콘의 기계적 성질에 관련된 접착력과 마찰력의 경향성이 보여졌고 이러한 방향의 연구는 충-방전 동안 리튬화된 나노수준의 영역의 화학적 맵핑에 응용성을 보여준다.

• Asia Marketing Journal
• /
• 제15권4호
• /
• pp.103-129
• /
• 2014

Differentiated positioning becomes increasingly difficult when brand salience weakens. Also, the daily increase in new media use and information load has led to a social climate that regards advertising stimuli as spamming. For these reasons, the focus of advertisement-related communication is shifting from persuading consumers through the direct delivery of information to an emphasis on appealing to their emotions using matching stimuli to enhance persuasion effects. Recently, both academia and industry have increasingly shown an interest in storytelling methods that can generate positive emotional responses and attitude changes by arousing consumers' narrative processing. The purpose of storytelling is to elicit consumers' emotional experience to meet the objectives of advertisement producers. Therefore, the most important requirement for storytelling in advertising is that it evokes consumers' sympathy for the main character in the advertisement. This does not involve advertisements directly persuading consumers, but rather, consumers themselves finding an answer through the advertisement's story. Thus, consumers have an indirect experience regarding the product features and usage through empathy with the advertisement's main character. In this study, we took the results of a precedent study as the starting point, according to which consumers' emotional response can be altered depending on the storytelling methods adopted for storytelling ads. Previous studies have reported that drama-type and vignette-type storytelling methods have a considerably different impact on the emotional responses of advertising audiences, due to their different structural characteristics. Thus, this study aims to verify that emotional response aroused by different types of advertisement storytelling (drama ads vs. vignette ads) can be controlled by the socio-psychological gender difference of advertising audiences and that the interaction effects between the socio-psychological gender differences of the audience and the gender stereotype of emotions to which advertisements appeal can exert an influence on emotional responses to types of storytelling in advertising. To achieve this, an experiment was conducted employing a between-group design consisting of 2 (storytelling type: drama ads vs. vignette ads) × 2 (socio-psychological gender of the audience: masculinity vs. femininity) × 2 (advertising appeal emotion type: male stereotype emotion vs. female stereotype emotion). The experiment revealed that the femininity group displayed a strong and consistent empathy for drama ads regardless of whether the ads appealed to masculine or feminine emotions, whereas the masculinity group displayed a stronger empathy for drama ads appealing to the emotional types matching its own gender as well as for vignette ads. The theoretical contribution of this study is significant in that it sheds light on the controllability of the audiences' emotional responses to advertisement storytelling depending on their socio-psychological gender and gender stereotype of emotions appealed to through advertising. Specifically, its considerable practical contribution consists in easing unnecessary creative constraints by comprehensively analyzing essential advertising strategic factors such as the target consumers' gender and the objective of the advertisement, in contrast to the oversimplified view of previous studies that considered emotional responses to storytelling ads were determined by the different types of production techniques used. This study revealed that emotional response to advertisement storytelling varies depending on the target gender of and emotion type appealed to by the advertisement. This suggests that an understanding of the targeted gender is necessary prior to producing an advertisement and that in deciding on an advertisement storytelling type, strategic attention should be directed to the advertisement's appeal concept or emotion type. Thus, it is safe to use drama-type storytelling that expresses masculine emotions (ex. fun, happy, encouraged) when the advertisement target, like Bacchus, includes both men and women. For brands and advertisements targeting only women (ex. female clothes), it is more effective to use a drama-type storytelling method that expresses feminine emotions (lovely, romantic, sad). The drama method can be still more effective than the vignette when women are the main target and a masculine concept-based creative is to be produced. However, when male consumers are targeted and the brand concept or advertisement concept is focused on feminine emotions (ex. romantic), vignette ads can more effectively induce empathy than drama ads.

• 마케팅과학연구
• /
• 제20권1호
• /
• pp.89-97
• /
• 2010

本文研究共同特性对于无选择权的影响, 并涉及到了调节焦点理论. 本文主要着眼于这三个因子以及他们之间的关系. 之前的研究已经广泛涉及到这三个方面. 第一, 共同特性影响已经被广为研究. Tversky (1972) 开创了这个理论, EBA 模型: 通过消除方面. 根据这个理论, 消费者在比较的过程中更易于注意特殊的特性, 而忽略共同特性. 最近, 更多的研究开始针对于此模型对于消费者行为的影响. Chernev (1997) 认为增加共同特性可以减少选择距离. 但是, 随后Chernev (2001) 的研究指出共同特性可能是消费者认知上的负担, 所以他们更喜欢启发式的过程而不是系统式的过程. 这些研究提出了一系列问题: 共同特性是否影响顾客选择? 如果是的话, 这些影响是什么样子的? 第二, 一些研究指出没有选择的状况是消费者最好的选择, 他们在犹豫不决时用这种方法回避选择. 其他关于这一理论的研究是时间的压力, 消费者自信, 以及可供选择的数量. 第三, 调节聚焦理论在目前非常流行. 消费者有两个焦点目标: 促进和制止. 促进聚焦主要和希望, 野心, 成功, 获得等有关; 而制止聚焦和责任, 职责, 安全, 规避等有关. 调节聚焦理论预测了顾客的感情, 创造, 态度, 记忆, 表现, 和判断. 而这些都是市场营销研究的领域这些文献为本文的研究提供了一些理论支持. 特别是增加共同特征而不是忽略他们可以增加选择过程中克制消费者的没有选择状况的比重, 其对于促进消费者的作用确实相反的. 本文通过两个试验进行验证. 第一个是2 X 2 组间的设计(共同特性X调节聚焦), 数码相机作为相关的客体. 特别的是, 调节聚焦变量是从11个问题中取得的. 共同特性包括焦距, 重量, 记忆卡, 电池, 而像素和价格作为独特特性. 结果证明了我们的假设, 那就是增加共同特性增加了克制消费者的无选择比重, 而对促进消费者没有作用. 第二个试验被用来复制第一个实验的结果. 这个实验和之前的基本相同, 只有两个方面不同—主要控制和研究客体. 在促进的前提下, 研究对象必须一些词例如: 利润, 野心, 高兴, 成功, 发展等. 在克制的前提下, 他们必学写下坚持, 安全, 保护, 规避, 损失, 责任等词. 实验证明我们假设是成立的. 本研究说明了共同特性对于顾客选择的二重效果. 增加共同特性可以提高或者降低无选择状况. 本文对于理论研究和实践上都有着贡献. 对于市场营销人员来说, 他们可能需要根据顾客的划分来考虑产品的共同特性. 理论上, 研究结果支持共同特性和无选择状况的调节变量. 最后, 本文也有一些不足, 例如过于强调态度的重要性等. 我们希望本文能够为未来的研究做出抛砖引玉的作用.