• ALGAE
• /
• 제35권3호
• /
• pp.253-262
• /
• 2020

Haematococcus pluvialis is a commercial microalga that can produce high quantities of astaxanthin. Under induced conditions, some important changes in the subcellular structures related to astaxanthin accumulation were observable. For example, a large number of astaxanthin granules, oil structures and starch granules appeared in the thick-walled cells; Astaxanthin granules gradually dissolved into the oil structures and spread throughout the entire cell with the fusion and diffusion process of oil structures during the middle and late stages of induction; The plastoglobules were closed to the newly formed structures, and some plastoglobules would abnormally increase in size under stress. Based on observations of cell damage, the degradation of membrane structures, such as chloroplasts, was found to be the primary form of damage during the early stage of induction. During the middle stage of induction, some transparent holes were exposed in the dissolving astaxanthin granules in the cytoplasm. In thick-walled cells, these transparent holes were covered by oil substances dissolving astaxanthin, thereby avoiding further damage to cells. Given the relatively few oil structures, in non-thick-walled cells, the transparent holes expanded to form multiple transparent areas, eventually resulting in the rupture and death of cells. These results suggested that the high level of synthesis and the wide range diffusion of oil explained the expansion of astaxanthin in H. pluvialis.

• 한국게임학회 논문지
• /
• 제7권1호
• /
• pp.31-42
• /
• 2007

피부, 옷 등 실세계의 대부분의 물질들은 반투명한 재질로 되어있고, 부드러운 외양을 띄고 있다. 본 논문에서는 GPU 기반의 계층화 알고리즘을 통해, 양극 확산 (dipole diffusion) 기법에 기반한 표면 내에서의 빛의 산란에 의한 조명을 근사하여 반투명한 재질을 실시간에 렌더링하는 기법을 제안한다. 무수히 많은 수의 픽셀 빛 입자들은 GPU를 활용하여 쿼드트리로 계층화된다. 렌더링될 각 픽셀마다, 많은 빛 입자를 대신하여 좋은 화질로 근사할 수 있는 집합들을 선택하고, 이것을 사용하여 조명을 계산한다. 우리는 또한, 고해상도 이미지를 효율적으로 렌더링하기 위해 공간적 일관성과 early-z 컬링을 이용한 계층적 화면 보간 기법을 소개한다. 이를 위하여, 화면 정보를 GPU 상에서 계층화한다. 우리는 공간적 유사도가 높은 픽셀들을 하나의 픽셀로 렌더링함으로써 적응적으로 보간한다. 실험을 통해 빛 계층화를 통해 반투명한 물체를 실시간에 렌더링할 수 있음을 확인하였다. 화면 보간 기법은 동급 화질에서 렌더링 비용을 $2{\sim}4$배 정도 감소시켰다. 모든 과정은 GPU를 사용한 이미지 공간 상에서 빠르게 수행되며, 어떠한 긴 전처리과정도 필요하지 않는다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권6호
• /
• pp.662-669
• /
• 2015

해저 석유생산시스템에서 빈번히 발생하는 왁스집적 문제는 안정적인 석유 생산을 방해하고 높은 비용을 발생시키므로 왁스집적 제어에 대한 관심이 증가하고 있다. 왁스집적 제어를 통한 석유의 유동안정성 확보를 위해서는 왁스집적거동을 신뢰성 있게 예측해야 한다. 이 연구에서는 왁스집적 거동에 큰 영향을 미치는 분자확산, 전단응력효과, 왁스경화 메커니즘을 시뮬레이션 기술에 적용하여 불확실도가 높은 변수인 전단응력계수, 왁스고형물의 공극률, 왁스 열전도도, 분자확산계수와 물과 가스 양이 왁스집적 거동에 미치는 영향에 대한 분석을 단상과 다상 유동 시 층류 유동 조건에서 수행하였다. 그 결과 왁스고형물의 공극률과 분자확산계수가 높아질수록, 전단응력계수가 낮아질수록 왁스집적 두께가 두꺼워지는 것을 확인할 수 있었고 석유의 온도가 왁스집적 위치에 주요하게 영향을 미치는 것으로 판단된다. 물의 양에 따른 왁스집적 시뮬레이션 결과 기존 연구에서 다소 다른 결과들이 존재하나 이 연구 조건에서는 물의 양 40%까지 왁스집적량이 증가하다 감소하는 것을 확인하였고 가스 양이 많아질수록 유체의 액상 내 가벼운 탄화수소 농도 감소로 인해 왁스집적량이 증가하는 것을 파악하였다. 이 연구결과는 향후 현장 또는 현장을 모사한 실험시스템에서의 결과와 시뮬레이션 결과를 매칭하여 해저 유동관에서 왁스집적 거동을 예측하는데 효과적으로 적용될 수 있을 것으로 사료된다.

• 한국수산과학회지
• /
• 제17권1호
• /
• pp.40-46
• /
• 1984

용매추출법에 의한 정어리 백색육중의 지질을 hexane으로 추출하여 추출속도 이론과의 연관성을 구명하고 또한 추출속도에 미치는 인자중 온도 및 수분함량의 영향을 검토한 결과는 다음과 같다. 1. 정어리 지질의 추출은 초기와 후기로 나누어지며 율속단계인 후기에서의 확산계수를 구하기 위하여 Fick의 비정상 상태 확산이론을 적용시키는 것은 가능하다. 2. $30^{\circ}C,\;45^{\circ}C,\;60^{\circ}C$의 추출온도에서 이론과의 연관성이 가장 좋았던 것은 $30^{\circ}C$의 경우였으며 $45^{\circ}C,\;60^{\circ}C$의 경우에서는 이론보다 빠르게 진행되었으나 오차의 범위내에 있었다. 3. 추출속도의 온도의존성은 추출곡선의 기울기 (K)에 대하여 절대온도(T)의 11승에 비례하여 증가하였다. 4. 수분함량이 추출속도에 미치는 영향은 $32.42\%$에서 적을수록 추출속도는 빨랐으며. 추출곡선의 기울기(K)는 수분함량 $1\%$의 감소에 대략 $0.53{\times}10^{-6}cm^2/sec$씩 증가하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.224-224
• /
• 2016

Many researchers have been tried to improve the performance of the phosphorescent organic light-emitting diode(PHOLED) by controlling of the dopant profile in the emission layer. In this work, as shown in Fig. 1 insert, a typical red PHOLED device which has the structure of ITO/NPB(50nm)/CBP(30nm)/TPBi(10nm)/Alq3(20nm)/LiF(0.8nm)/Al(100nm) is fabricated with a 5nm thick doping section in the emission layer. The doping section is formed by co-deposition of CBP and Ir(btp)2acac with a doping concentration of 8%, and it's location(x) is changed from HTL/EML interface to EML/HBL in 5nm steps. The current efficiency versus current density of the devices are shown in Fig. 1. By changing the location of doping section, as shown in Fig. 1 and 2, at x=5nm, the efficiency shows the maximum of 3.1 cd/A at 0.5 mA/cm2 and it is slightly decreased when the section is closed to HTL and slightly increased when the section is closed to HBL. If the doping section is closed to HTL(NPB) the excitons can be quenched easily to NPB's triplet state energy level(2.5eV) which is relatively lower than that of CBP(2.6eV). Because there is a hole accumulation at EML/HBL interface the efficiency can be increased slightly when the section is closed to HBL. Even the thickness of the doping section is only 5nm,. the maximum efficiency of 3.1 cd/A with x=5 is closed to that of the homogeneously doped device, 3.3 cd/A, because the diffusion length of the excitons is relatively long. As a result, we confirm that the current efficiency of the PHOLED can be improved by the doping profile optimization such as partially, not homogeneously, doped EML structure.

• 에너지공학
• /
• 제8권2호
• /
• pp.248-255
• /
• 1999

미분형 고정층 반응기에서 고체산 촉매(HY 제올라이트, $\beta$-제올라이트, HZSM-5)를 이용하여 폐윤활유를 1차 열분해한 오일의 촉매분해 반응을 연구하였다. 촉매의 활성 검토에 사용된 원료물질은 폐윤활유를 반응온도 48$0^{\circ}C$, 반응시간($\tau$) 60분으로 진행되는 벤치규모의 연속공정에서 생산된 제품이다. HY제올라이트의 경우 탄소수 21개 이하의 경유 성분을 얻을 수 있는 최적 반응조건은 WHSV(weight hourly space velocity)=1, 반응온도는 375$^{\circ}C$임을 알 수 있었다. 암모니아 탈착법을 이용하여 전체의 산점 및 강산점 수를 측정한 결과 $\beta$-제올라이트가 가장 많은 것으로 나타났다. 탄소수 21개 이하 성분의 수율을 기준으로 촉매의 활성 순서를 평가할 때 HY제올라이트〉$\beta$-제올라이트〉HZSM-5 임을 알 수 있었다. 또한 코크의 생성량 역시 동일한 순서를 보였다. 이러한 결과를 보인점은 HY제올라이트의 경우 촉매내부 미세기공의 평균직경이 크므로. 반응물이 촉매내부로 쉽게 확산될 수 있어 내부의 산점에서 분해반응의 진행이 적절함으로 나타난 결과로 판단되었다. 이러한 점은 코크의 생성량으로도 확인할 수 있었다.

• 한국재료학회지
• /
• 제21권2호
• /
• pp.120-124
• /
• 2011

Silicon heterojunction solar cells have been studied by many research groups. In this work, silicon heterojunction solar cells having a simple structure of Ag/ZnO:Al/n type a-Si:H/p type c-Si/Al were fabricated. Samples were fabricated to investigate the effect of transparent conductive oxide growth conditions on the interface between ZnO:Al layer and a-Si:H layer. One sample was deposited by ZnO:Al at low working pressure. The other sample was deposited by ZnO:Al at alternating high working pressure and low working pressure. Electrical properties and chemical properties were investigated by light I-V characteristics and AES method, respectively. The light I-V characteristics showed better efficiency on sample deposited by ZnO:Al by alternating high working pressure and low working pressure. Atomic concentrations and relative oxidation states of Si, O, and Zn were analyzed by AES method. For poor efficiency samples, Si was diffused into ZnO:Al layer and O was diffused at the interface of ZnO:Al and Si. Differentiated O KLL spectra, Zn LMM spectra, and Si KLL spectra were used for interface reaction and oxidation state. According to AES spectra, sample deposited by high working pressure was effective at reducing the interface reaction and the Si diffusion. Consequently, the efficiency was improved by suppressing the SiOx formation at the interface.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.351-358
• /
• 2006

The capability of high pressure injection with small fuel quantify at all engine operating conditions is one of the main feature in common rail fuel injection system, which is used in small and light-duty Diesel engine. The key parameter for the better atomized fuel sprays and multiple injections of this common rail fuel injection control, that can be freely selected irrespective of the engine speed and load is the mechanism controlling the needle energizing and movement in high pressure Diesel injector. In the electro-hydraulic injector, the injection nozzle is being opened and closed by movement of the injector's needle which is balanced by pressure between the nozzle seat and the needle control chamber. This study describes the macroscopic spray structure characteristics of the common rail Diesel injectors with different electric driving method i.e. the solenoid-driven and piezo-driven type. The macroscopic spray characteristics such as spray tip speed. spray tip penetration and spray cone angle were investigated by the high speed spray, which is measured by the back diffusion light illumination method with optical system for the high speed temporal photography in a constant volume chamber pressurized by nitrogen gas. As the results, the prototype piezo-driven injector system was designed and fabricated for the first time in domestic case and the effect of injector's needle response driven by different drive type was compared between the solenoid and piezo-driven injector It was found therefore. that the piezo-driven injector showed faster needle response and had better needle control capability by altering the electric input value than the solenoid-driven injector.

• 한국재료학회지
• /
• 제27권10호
• /
• pp.563-568
• /
• 2017

In this study, the coating of an Al-Cr layer on the surface of a Zircaloy-4 alloy was carried out through plasma pretreatment coating and a laser surface melting process. Two different conditions for laser treatment, severe or minimal surface melting of the Zr alloy substrate, were applied to form the final coating. When there was significant surface melting of the Zr alloy, the solidification microstructure of the newly formed coating layer was mainly composed of needle-shaped $Al_3Zr$, Al(Cr) and $Al_7Cr$ phases. On the other hand, the solidification microstructure of the coating layer was mainly composed of Al(Cr) and $Al_7Cr$ phases when there was minimal surface melting of Zr base in the laser process. However, when the coating was maintained at $1100^{\circ}C$ for 2 hours, significant inter-diffusion occurred between the phases in the coating. As a result, the upper part of the coating layer was observed to mainly consist of $Al_3Zr$ and $Al_8Cr_5$ phases, regardless of the laser treatment conditions.

• 한국정밀공학회지
• /
• 제32권1호
• /
• pp.63-68
• /
• 2015

Micro/nano patterns for optical concentration and diffusion have been studied in the various fields such as displays, optics, and sensors. Conventional micro patterns were continuous and linear shapes due to using linear-type light sources, however, recently non-continuous patterns have been applied as point sources are used for dot-type light sources such as LEDs and OLEDs. In this study, a hybrid machining technology combining an indentation machining method and an AAO process was developed for manufacturing the non-continuous micro patterns having nano patterns. First, mirror-like surfaces ($R_a<20nm$) of pure Aluminum substrates were obtained by optimizing cutting conditions. Then, The letter of 'K' consisting of the arrays of the micro patterns was manufactured by the indentation machining method which has a similar principle to indentation hardness testing. Finally, nano patterns were machined by AAO process on the micro patterns. Conclusively, a specific letter having nano-micro hybrid patterns was manufactured in this study.