• 조명전기설비학회논문지
• /
• 제25권4호
• /
• pp.16-23
• /
• 2011

Since the first lighting light source was invented, lighting has turned into superior-quality lighting considering the amenity of occupants, and the characteristics of a light source has developed rapidly. So this research confirmed the lighting performance of a dimmer control system and an ON-OFF control system via the existing light source, and analyzed the basic lighting environment of Permanent Supplementary Artificial Lighting of Interiors(PSALI) through the physical comparison and evaluation of a LED lamp substituted for a fluorescent lamp used in a dimmer control system, showing that the lighting physical quantity characteristics of an ON-OFF control system and a dimmer control system are similar to each other and that they are effective in terms of energy saving. Besides, it was shown that introducing a LED light source to a dimmer control system improves lighting environments and largely reduces energy consumption.

• 접착 및 계면
• /
• 제23권2호
• /
• pp.39-43
• /
• 2022

디스플레이, 태양전지와 같이 전기를 빛으로, 또는 빛을 전기로 변환시켜주는 광전자소자는 효율 향상을 위하여 빛의 거동 제어가 매우 중요하다. 즉, OLED의 경우 내부 빛 제어를 통해 더 많은 빛이 외부로 나갈 수 있도록 유도해 줄 때 발광효율을 향상시킬 수 있으며, 외부 빛 제어를 통해 광흡수층에서의 광경로를 증대시킬 경우 태양전지의 에너지 변환효율을 증가시킬 수 있다. 본 연구에서는 이러한 광거동 제어가 가능한 구조로서 주름구조에 대한 연구를 진행하였으며 응력 해소 시간을 제어하여 구조의 주기와 높이를 독립적으로 제어하고자 하였다. 주기와 높이의 변화가 광거동에 어떠한 영향을 미치는지 살펴보기 위하여 일정한 주기에서 높이 변화 및 유사한 높이에서 주기 변화에 따른 자외선/가시광선 분광분석(UV/Vis spectroscopy)을 실시하였으며 구조의 종횡비가 클수록 직진광의 비율이 낮고 분산광의 비율이 높음을 확인하였다. 이를 통해 광경로 변화 및 광경로 증가를 위하여 큰 종횡비의 주름구조가 요구됨을 확인할 수 있었다.

• Parasites, Hosts and Diseases
• /
• 제47권2호
• /
• pp.159-165
• /
• 2009

House-residual spraying and insecticide-treated bed nets have achieved some success in controlling anthropophilic and endophagic vectors. However, these methods have relatively low efficacy in Korea because Anopheles sinensis, the primary malaria vector, is highly zoophilic and exophilic. So, we focused our vector control efforts within livestock enclosures using ultraviolet black light traps as a mechanical control measure. We found that black light traps captured significantly more mosquitoes at 2 and 2.5 m above the ground (P<0.05). We also evaluated the effectiveness of trap spacing within the livestock enclosure. In general, traps spaced between 4 and 7m apart captured mosquitoes more efficiently than those spaced closer together (P>0.05). Based on these findings, we concluded that each black light trap in the livestock enclosures killed 7,586 female mosquitoes per trap per night during the peak mosquito season (July-August). In May-August 2003, additional concurrent field trials were conducted in Ganghwa county. We got 74.9% reduction (P<0.05) of An. sinensis in human dwellings and 61.5% reduction (P>0.05) in the livestock enclosures. The black light trap operation in the livestock enclosures proved to be an effective control method and should be incorporated into existing control strategies in developed countries.

• 수산해양기술연구
• /
• 제53권3호
• /
• pp.240-245
• /
• 2017

In order to study for the growth of fish in the aquaculture industry, the behavior analysis of rock bream (Oplegnathus fasciatus) depending on the temperature and LED lights was conducted. In this study, water temperatures from 10 to 30 degrees were used. One red light (wave length: 622 nm; light power: 811 mW) and one green light (wave length: 518 nm; light power: 648 mW) were used. Behavior of the rock bream was analyzed at an average moving distance for one minutes (AMD) and a rate of movement. The mean AMD were respectively 5.3 m, 7.3 m and 3.0 m in the red LED light, green LED light and control condition. The mean rates of movement were 77%, 88% and 61% respectively in the red LED light, green LED light and control condition. The mean AMD during 24 hours were 3.1 m, 3.1 m and 3.3 m respectively in the red LED light, green LED light and control condition.

• 전력전자학회논문지
• /
• 제21권1호
• /
• pp.65-71
• /
• 2016

This study investigates a high-accuracy alternate QD model to estimate the characteristics of induction motor under light loads. To demonstrate the usefulness of the alternate QD model, a maximum torque per amp (MTPA) control based on the alternate model is shown to outperform MTPA control based on the standard QD model. The experimental study conducted in this work exhibits that the MTPA control based on the alternate QD model tracks torque commands between 20 Nm and 30 Nm with 5% error, whereas the MTPA control based on the standard QD model generates torques lower by over 23% compared with the aforementioned torque commands. This result indicates that the alternate QD model is a highly accurate model for induction motors under light loads.

• 조명전기설비학회논문지
• /
• 제19권1호
• /
• pp.182-189
• /
• 2005

본 논문은 조명시설을 효과적으로 제어 관리를 위하여 휴대용 개인 단말기를 통하여 On-Line으로 작업이 가능한 Web서버의 개발에 관하여 연구하였다. 현재 조명시설의 제어는 단순한 기능에 의존하고 있는 실정이다. 본 연구를 통하여 개발된 결과물을 통하여 대중화된 휴대용 개인 단말기를 이용하여 실시간으로 조명시설을 효율적으로 제어 및 관리함으로써 경제적, 인력적인 면에서 효과를 얻을 수 있을 것이다.

• 대한임베디드공학회논문지
• /
• 제6권1호
• /
• pp.25-31
• /
• 2011

LEDs are becoming the most suitable candidate replacing traditional fluorescent street-light lamps because of its energy efficiency and high brightness. Furthermore, most countries are urging to pursue energy savings in conjunction with IT and sensor network. In order to conserve energy of LED lamp and ensure the safety of pedestrian, we propose a new smart control method for LED light system based on USN using compound sensors, such as illuminance, motion, temperature and humidity sensor. An elaborate simulation shows that the proposed system with a smart control based switching can reduce the energy by 40%, compared to the previous street-light system with a fixed time based switching.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제3권5호
• /
• pp.423-443
• /
• 2009

We present the design and implementation of a unique sensing and actuation application -- the Illuminator: a sensor network-based intelligent light control system for entertainment and media production. Unlike most sensor network applications, which focus on sensing alone, a distinctive aspect of the Illuminator is that it closes the loop from light sensing to lighting control. We describe the Illuminator's design requirements, system architecture, algorithms, implementation and experimental results. The system uses the Illumimote, a multi-modal and high fidelity light sensor module well-suited for wireless sensor networks, to satisfy the high-performance light sensing requirements of entertainment and media production applications. The Illuminator system is a toolset to characterize the illumination profile of a deployed set of fixed position lights, generate desired lighting effects for moving targets (actors, scenic elements, etc.) based on user constraints expressed in a formal language, and to assist in the set up of lights to achieve the same illumination profile in multiple venues. After characterizing deployed lights, the Illuminator computes optimal light settings at run-time to achieve a user-specified actuation profile, using an optimization framework based on a genetic algorithm. Uniquely, it can use deployed sensors to incorporate changing ambient lighting conditions and moving targets into actuation. Experimental results demonstrate that the Illuminator handles various high-level user requirements and generates an optimal light actuation profile. These results suggest that the Illuminator system supports entertainment and media production applications.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.79-87
• /
• 2004

The light pattern reflected from a machined surface contains some information like roughness and profile on the projected surface as expected in the Beckmann-Spizzichino model. In applying the theory into a real reliable measuring device, many parameters such as incident light power, wave length, spot size should be kept a constant optical value. However, the reflected light power is likely to change with the environmental noise, the variations of the light source, the reflectivity of the surface, etc. even though the incident light power is constant. In this study, a method for adjusting the incident light power to keep the reflected light power projected on a CMOS image sensor constant was proposed and a simple adjustment algorithm based on PI digital control was examined. Experiments verified that the proposed method made the surface roughness measurement better and more reliable even under variations of the height of light source.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.285-287
• /
• 2008

This paper represents the electric power load leveling effect of the Light Control System(LCS). The lighting of typical mid-large commercial buildings is the major factor of daytime electric power consumption. Since the national peak power demand occurs in between 11:00 and 16:00, the dimming control of light can contribute the decrease of the power demand We will discuss the load leveling effect of dimming control with LCS.