• Resources Recycling
• /
• v.29 no.1
• /
• pp.81-88
• /
• 2020

Recovery of gallium and indium from waste light emitting diodes has been emphasized gradually owing to high content of gallium and indium. This study was established the recovery of gallium (Ga³⁺) and indium (In³⁺) from waste gallium nitride was contained in waste light-emitting diodes. The procedure was divided into the following steps; characteristic analysis, alkaline roasting, and leaching. In characteristic analysis part, the results were used as a theoretical basis for the acid leaching part, and the chemical composition of waste light emitting diodes is 70.32% Ga, 5.31% Si, 2.27% Al and 2.07% In. Secondly, with reduction of non-metallic components by alkaline roasting, gallium nitride was reacted into sodium gallium oxide, in this section, the optimal condition of alkaline roasting is that the furnace was soaked at 900℃ for 3 hours with mixing Na₂CO₃. Next, leaching of waste light emitting diodes was extremely important in the process of recovery of gallium and indium. The result of leaching efficiency was investigated on the optimal condition accounting for the acid agent, concentration of acid, the ratio of liquid and solid, and reaction time. The optimal condition of leaching procedures was carried out for 2.0M of HCl liquid-solid mass ratio of 30 ml/g in 32minutes at 25℃ and about 96.88% Ga and 96.61% In were leached.

• Journal of Environmental Health Sciences
• /
• v.29 no.1
• /
• pp.51-61
• /
• 2003

Pollution purification using titanium dioxide (TiO$_2$) photocatalyst has attracted a great deal of attention with increasing number of relent environmental problems. Currently, the application of TiO$_2$ photocatalyst has been focused on purification and treatment of waste water. However. the use of conventional TiO$_2$ powder photocatalyst results in disadvantage of stirring during the reaction and of separation after the reaction. And the usage of artificial UV lamp has made the cost of photocatalyst treatment system high. Consequently, we herein studied the pilot-scale design to aid in optimization of the energy-saving process for more through development and reactor design by solar light/UV lamp/ TiO$_2$system. In this study, we manufactured the TiO$_2$sol by sol-gel method. According to analysis by XRD, SEM and TEM, characterization of TiO$_2$ sol were nano-size (5-6 nm) and anatase type. Inorganic binder (SiO$_2$) was added to TiO$_2$ lot to be coated for support strongly, and support of ceramic bead was used to lower separation rate that of glass bead The influences were studied of various experimental parameters such as TiO$_2$ quantity, pH, flow rate. additives, pollutants concentration, climate condition and reflection plate by means of reaction time of the main chararteristics of the obtained materials. In water treatment system, variable realtor as solar light/ or UV lamp according to climate condition such as sunny and cloudy days treated the phenol and E-coli(Escherichia coli) effectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.13 no.1
• /
• pp.33-38
• /
• 1980

The competition in root growth between plants was investigated under the field condition of Panax ginseng. Competition pattern was classified in three groups, interline, interrow and diagonal and the principal factor for competition was considered light, nutrients including water and both of them, respectively. Interline competition was always great while interrow and diagonal competition were varied to field. Diagonal competition was always great at the backside line. Competition appeared to be significant from the age of 4 years old at which leaf area index become greater than one. Above facts strongly suggest that main competition at present shading structure appears light and thus light intensity sufficient to decrease or eliminate light competition is the key factor to increase yield.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.11-16
• /
• 2002

In this paper, single-layer white organic light emitting device was fabricated on ITO glass substrate using PVK as host, Bu-PBD as electron transport layer, Nile Red, Coumarin 6, TPB as red, green, blue color fluorescent dyes. The red, green, blue organic light emitting devices were fabricated respectively. After the characteristic analysis of each color device, the white organic light emitting device was fabricated with optimized condition of each color device by spin coating method. we obtained white emission CIE coordination of (0.32, 0.34) and luminescence of 785cd/$m^2$ at driving voltage of 20V with condition of PVK(70wt%), Bu-PBD(30wt%), Nile Red(0.015mol%), Coumarin 6(0.04mol%), TPB(3mol%). 

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.3
• /
• pp.341-352
• /
• 2019

LTV(Light Tactical vehicle) operating in our military requires higher levels of performance and durability to withstand harsher conditions than ordinary vehicles, as they must travel on both rough-train and off-road as well as on public roads. Recently, developed light tactical vehicle is developed by a variety of test evaluations in order to satisfy ROC(Required Operational Capability) by the requirement military group. However, there is no standardized driving test condition for satisfying the durability performance of Korean tactical vehicle. Therefore, this study aims to provide basic data to establish reliable driving test conditions by analyzing the maneuver conditions and the driving data in order to select the representative drive course required. To do this, we analyzed the future operational environment, the area of operation analysis and the driving information of light tactical vehicle.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.2
• /
• pp.79-86
• /
• 2006

As a factor of housing environment, right of light became a subject of discussion as a social issue. Cases on the right of light in properties have been increased. Also many interests in the scape of the city have been increased. This study aims to show the possibility of variation of the shape of the apartment buildings considering the right of light. Reflecting this recent situation, we are setting up the night illumination and constructing a building which acts as Land Mark like the Jong-Ro Tower. And In case of the apartment building, various forms are deviated from an existing standardized form and skyline Existing studies on the sunshine of apartment buildings have dealt with just a standardized apartment building form. So this study analyzed a recently increasing interest for right of light and the changes of sunshine environment of apartment buildings having various forms of skyline.

• Asian Journal of Turfgrass Science
• /
• v.13 no.1
• /
• pp.1-20
• /
• 1999

This study was carried out to investigate the interaction between productivity and light condition and to analyze the material productivity and productive charactaristics under different hours of light in Zoysia japonica. 1. Rate increasement of leaf number and total leaf length was remarkably high at the early growth stage in the control and 9 hour light treatment. The rate gradually decreased as growth proceeded. But 3 hour treatment was very low in the rate from its early growth stage through the whole test period. 2. The increasing rate of leaf area ratio (LAR) in all the experimental plots was remarkably high at the early growth stage after transplanting the grass. The shorter photoperiod resulted remarkable lower increasement of LAR. 3. The rhizome growth rate of the 9 hour photoperiod was high contrast to the 3 hour photoperiod treatment. The increasing rate of node number was also showed similar trend. 4. Chlorophyll content was very high at the 36 days after transplanting and then decreased gradually. Chlorophyll content on 3 hours photoperiod plot severely decreased. The ratio of chlorophyll a to b was decreased significantly at short day treatment. 5. The content of soluble sugar was increased at shorter photoperiod. The highest ratio of sugar content was on August, 28 by HPLC method. Such a result was attributed to accumulation of sugar in spite of low synthesis of ploysacchrides, translocation by low consumption. 6. The increasing rate of standings in all light treatment was high at the early growth stage after transplanting. Short photoperiod treatment by 3hour showed especially low prganic productivity on Zoysia japonica.

• Journal of Photoscience
• /
• v.7 no.2
• /
• pp.53-58
• /
• 2000

We performed the cloning of a chalcone synthase (CHS) gene, the key enzyme in the anthocyanin biosynthesis, from the cDNA library constructed with grape suspension cells irradiated UV-B. The PCR fragment was used to cloning the CHS gene. One CHS cDNA clone containing an open reading frame and a partial stilbene synthase (STS)cDNA, the stilbene-type phytoalexin, were isolated. The CHS cDNA clone (VCHS) showed 87% sequence homology with VvCHS (V.vinifea) and 72.3% identity with VSTSY(V.vinifea). its amino acid sequences were longer than any other CHS genes as 454 residues. Two genes were weakly expressed in white light irradiated cells, but highly induced in UV-B irradiated condition during 32 hours. Interestingly, the STS was quickly and abundantly expressed from 2 hours when supplemented with jasmonic acid (JA) and the maximum expression was observed at 4 hours and then gradually decreased. But, the additional UV-B or white light quickly degraded the STS expression than only JA treated grape suspension cells. The CHS also was rapidly induced with JA and the synergistical effect was observed at the addigional light treatment of UV-B or white light. These results are indicated that CHS and STS have different response mechanisms against the environmental stresses.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.35-43
• /
• 2008

Aviation obstacle lights including controller for the safe night aviation service have applied to high voltage transmission line of which height is from $60{\sim}180 m$, Fresnel lens made by Augustine Fresnel have been applied to light houses, These Fresnel lens were applied to aviation obstacle lights and have been universally used, It was reported that Fresnel lens for aviation obstacle light was used in the first place in Korea in 1987, LEDs have recently been applied to aviation obstacle lights, So, the optimum physical design is essential to the design of aviation obstacle light. In this study, optical and three dimensional modeling of LED module and globe lens were performed, And thermal analysis due to LED thermal source and service thermal condition in high voltage transmission line was performed and was analyzed comparing with experiments, The optimum design process of medium intensity LED aviation obstacle lights was constructed with three dimensional modeling, thermal analysis, and thermal experimental technique.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.225-230
• /
• 2011

This paper depict the system which reacts staly towards light changes, when object is detected using retinex. Previous interaction system does not react to transient light conditions. Since non-lighting condition was constructed in the limited space. However, if interaction contents work in the inside where the light changes, the light input is changed as the time goes by when the system detect objects with super sensitive camera few lighting transients makes system trouble. Thus, lighting is one of the most significant factors of the system.