• Rapid Communication in Photoscience
• /
• v.4 no.3
• /
• pp.54-58
• /
• 2015

Under the condition of femtosecond impulsive nonlinear optical irradiation, the bright and narrowed blue emission of silicon nanocrystal was observed. This synthetic method produced very small (~ 4 nm) oxide-capped silicon nanocrystal having probably ultra small emitting core (~ 1 nm) inferred from luminescence. By controlling the stirring condition, very high efficiencies of luminescence ( 4 fold higher) were obtained compared with the other conventional femtosecond laser fragmentation methods, which was attributed to the differences in hydration shell structure during the femtosecond laser induced irreversible phase transition reaction. When we properly adjusted the irradiation times of the white light continuum and stirring condition, very homogeneous luminescent silicon nanocrystal bands having relatively sharp lineshape were obtained, which can be attributable to the luminescent core site isolated and free from the surface defects.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.1
• /
• pp.8-17
• /
• 1987

Four foreign pasture cultivars such as Lotus corniculatus cv. Maitland, Trifolium pratense cv. Deben, Lolium perenne cv. $S_{23}$ and .Dactylis glomerata cv. $S_{26}$ were tested with "Kwisan" series, a common upland soil in Southern part of Korea. The cultivars in single or mixture were grown in pot with two levels of light intensity, i.e. a full sun light condition and 50% interception. Dry matter yield of top and root and their seasonal changes, the number of tillers or branches per plant and finally competative effects of mixtures were evaluated by estimating the expected yield, relative yield totals and compensation index. The results are summarized as follows: 1. Maitland showed a significant decrease in dry matter yield in shade condition, but the number of branches of Maitland was higher than those of Deben. 2. Maitland showed higher dry matter yield than Deben during the mid-summer period, while $S_{23}$, showed higher dry matter yield than $S_{26}$ during early season. 3. Mixtures of $S_{23}$ and Maitland, and $S_{26}$ and Deben gave better response to grasses by increasing the number of tillers in shade condition. 4. Combinations of Lotus corniculatus cv. Maitland and Dactylis glomerata cv. $S_{26}$ and Trifolium pratense cv. Deben and Dactylis glomerata cv. $S_{26}$ gave higher relative yield totals and higher compensation index, which envisages that the pasture establishment rates can be enhanced when those mixtures were sown by the oversowing method in the upland soil where phosphate level is very low and infertile in general.n general.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.2
• /
• pp.147-154
• /
• 2001

The prestressed concrete containment is one of the most important structures in nuclear power plants, which is required to prevent release of radioactive or hazardous effluents to the environment even in the case of a severe accident. Numerical analyses are carried out by using the ABAQUS finite element program to assess the ultimate pressure capacity of the Y prestressed concrete containment with light water reactor at design criteria condition and aging condition considering varied properties of time-dependant materials respectively. From the results, it is verified that the structural capacity of the Y prestressed concrete containment building under the present, aging condition is still robust. In addition, the parameter studies for the reduction of the ultimate pressure capacity of containment building according to the degradation levels of the main structural materials are carried out. The results show that when the degradations of each materials are considered as individual and combined forms, the influence is large in the order of tendon, rebar and concrete degradation, and tendon-rebar, tendon-concrete and rebar-concrete degradation respectively.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.163-170
• /
• 2005

Track substructure (ballast, subgrade) should have sufficient strength and uniform stiffness to fully support track superstructure (rail, fastener, sleeper). Vertical support stiffness of track is strongly influenced by the condition of ballast and subgrade layers. Therefore, the evaluation of the condition of track substructure is very important to evaluate the vertical support stiffness of track. This paper proposes the trackbed evaluation system, which is composed of Ground Penetrating Radar (GPR), Portable Ballast Sample. (PBS), and Light Falling Weight Deflectomete. (LFWD), to diagnose track substructure. The laboratory and field tests are performed to evaluate the applicability of the proposed trackbed evaluation system.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.38-39
• /
• 2017

This paper proposes a new control method for an AC-DC Buck converter which is utilized as a front-end converter of a 2-stage high power density adapter. In the conventional adapter applications, 2-stage configuration shows higher power transfer efficiency and higher power density than those of the single stage flyback converter. In the 2-stage AC-DC converter, the boost converter is widely used as a front-end converter. However, an efficiency variation between high AC line and low AC line is large. On the other hand, the proposed conduction band control method for a buck front-end converter has an advantage of small efficiency variation. In the proposed control method, switching operation is determined by a band control voltage which represents output load condition, and an AC line voltage. If the output load increasesin low AC line, the switching operation range is expanded in half of line cycle. On the contrary, in light load and high line condition, the switching operation is narrowed. Thus, the proposed control method reduces switching loss under high AC line and light load condition. A 60W prototype which is configured the buck and LLC converter with the proposed control method is experimented on to verify the validity of the proposed system. The prototype shows 92.16% of AC-DC overall efficiency and 20.19 W/in 3 of power density.

• Microbiology and Biotechnology Letters
• /
• v.18 no.1
• /
• pp.71-75
• /
• 1990

Yoghurt was prepared with Bifidobacterium longum TK-100 and Lactobacillus acidophilus TK-2070. The prepared yoghurt showed the increase of the titratable acidity under cold storage condition. This was derived from the active L. acidophilus TK-2070 on the logarithmic phase rather than from the B. longumn TK-2070. B. longum TK-100 grew well in the facultative anaerobic condition as well as in the strict anaerobic condition. Reinforced clostridial agar medium with 0.1% aniline blue was tried for the differential viable cell counts in the mixed culture and in the yoghurt. B. longurn TK-2070 had the light gray, blue-dotted colonies of about 2 mm diameter. L. acidophilus TK-2070 had the light gray colonies of about 1 mm diameter.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.270-277
• /
• 2019

Inspired by small insects, which perform rapid and stable locomotion based on body softness and tripod gait, various milli-scale six-legged crawling robots were developed to move rapidly in harsh environment. In particular, cockroach's leg compliance was resembled to enhance the locomotion performance of the crawling robots. In this paper, we investigated the effects of changing leg compliance for the locomotion performance of the small light weight legged crawling robot under various payload condition. First, we developed robust milli-scale six-leg crawling robot which actuated by one motor and fabricated in SCM method with light and soft material. Using this robot platform, we measured the running velocity of the robot depending on the leg stiffness and payload. In result, there was optimal range of the leg stiffness enhancing the locomotion ability at each payload condition in the experiment. It suggests that the performance of the crawling robot can be improved by adjusting stiffness of the legs in given payload condition.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.78-88
• /
• 1995

For producing iron or steel products with good quality, the concentration of the material components should be analyzed quickly with high relability using XRF(Fluorescent X-Ray Spectrometer). Since the analysis results are much dependent upon the surface con- dition, the samples have to be prepared to have good test condition. This study presents an image processing system for inspecting the surface condition of the iron test sample. In order to use thd computer vision system, we need to develop a lighting device and image processing algorithm. For the adequate lighting device of inspection system, the indirect lighting device is contrived to cut the external light and provide uniform, stable and cold light. The image processing algorithm is aimed to reduce inspection time and to get similar analyzing results to those of the experienced operators. At first, the image processing algorithm checks whether the surface of the iron sample is ground well or not. Then, the defects; hole or dig are conted and surface condition is evaluated. In addition, the algorithm gives the reliability of the analyzing results in order to help operator's decision.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.246-251
• /
• 2016

The use of security lighting that emits spill light is considered a cause of light trespass problems in the residential areas. Therefore, a cutoff panel was installed as an alternative way to reduce light trespass. On the other hand, it has another problem in that it is less effective and is not good enough for aesthetics and safety. In this study, a light cutoff panel was designed and manufactured to reduce the light trespass, and the structure of a proper light cutoff panel was studied. Using a goniophotometer, the light distribution file (IES file) was extracted and the characteristics of light distribution were analyzed using the RELUX program. The results showed that the reduction of spilt light in the backward direction was decreased significantly for all types of light cutoff panels except the coated globe. In the case of a black powder coated light cutoff panel, the forward light caused by light reflected from the surface of the light cutoff panel was also reduced, which means that the black powder coated light cutoff panel is effective in the performance of light cutoff in the forward and backward directions. In addition, the coated glove increased the spilt light in the forward and backward directions because it reflects the upward light to go down. A 90 % accuracy between the measurement value of light trespass and the expected value of the light trespass was obtained from a simulation.

• Journal of Plant Biotechnology
• /
• v.31 no.1
• /
• pp.37-41
• /
• 2004

In vitro culture system was established to induce multiple shoots of Thymus quinquecostatus Celak. by investigating the effects of cytokinins. Stem explants were cultures on MS medium supplemented with either five drfferent plant growth regulators or their combinations under light or dark condition. The most effective cytokininsource was the combination of BA 1.0mg/L and TDZ 0.1mg/L for producing shoots (6.05$\pm$1.51), zeatin 2.0mg/L and TEZ 0.1mg/L for elongating shoots (3.27$\pm$0.66cm) under the light condition. In addition the most effective cytokinin was 2-ip 2.0mg/L for producing shoots(5.20$\pm$1.81), zeatin 2.0mg/L for elongating shoots(5.64$\pm$1.24cm)under the dark condition. Overall, the average percent for in vitro shooting was greater than 89.58％.