• Title/Summary/Keyword: Light Condition

Search Result 2,473, Processing Time 0.031 seconds

Effect of Scrapping Aerial Mycelia and Light on the Production of Macroconidia and Chlamydospores of Cylindrocarpon destructans Causing Root Rot of Panax ginseng (기중균사 제거와 광처리가 인삼 뿌리썩음병균 Cylindrocarpon destructans의 대형분생포자 및 후막포자 생성에 미치는 영향)

  • Cho Dae-Hui;Yu Yun-Hyun;Ohh Seung-Hwan
    • Journal of Ginseng Research
    • /
    • v.23 no.3 s.55
    • /
    • pp.123-129
    • /
    • 1999
  • Under the light condition of 25,000 Lux (12 hrs dark and light cycle) with scrapping treatment of aerial mycelia of Cylindrocarpon destructans on potato dextrose agar (PDA), V-8 juice agar, and ginseng extract agar, production of the macroconidia was increased to $3.7\~8.1$ fold over them produced in the dark. They were also produced $7.7\~18.0$ times more in the liquid cultures under the light condition than under the dark as well. PDA and V-8 juice agar among the tested were the best for the macroconidium production. On PDA, 1,585 $macroconidia/mm^2$ were produced under the light of 25,000 Lux with scrapping treatment of aerial mycelia of C. destructans, which is 3.2 and 1.4 times more than those produced under 3,000 and 10,000 Lux, respectively. Meanwhile, $20\~99$ macroconidia/$mm^2$ were produced by the non-scrapping under the light condition between 3,000 Lux and 25,000 Lux. The macroconidia were, however, lysed at $6\~7$ days after being incubated under the above range of the light. They were consisted of $1\~3$ cells in a macroconidium while $69.4\~100\%$ of them were the two-celled and the number did not seem to be affected by either the scrapping or the light. Production of chlamydospore converted from mycelia of C. destructans seemed to be promoted by the light and the scrapping as well. The 1,285 chlamydospres/$mm^2$ were produced with the light (25,000 Lux), which is 2.8 and 1.2 times more than those with 3,000 and 10,000 Lux, respectively. Scrapping the aerial mycelia of the cultures increased the chlamydospore formation to 1.9, 2.5 and 1.4 times more than the non-scrapping under the light intensity of 3,000 Lux, 10,000 Lux, and 25,000 Lux, respectively. On PDA, 1 to 8 chlamydospore(s) per catena were formed by all treatments tested and $34.2\~58.9\%$ of them was a single chlamydospore, However, the numbers was affected by neither the light ($3,000\~25,000$ Lux) nor the scrapping the aerial mycelia.

  • PDF

Enhanced Electrical Properties of Light-emitting Electrochemical Cells Based on PEDOT:PSS incorporated Ruthenium(II) Complex as a Light-emitting layer

  • Gang, Yong-Su;Park, Seong-Hui;Lee, Hye-Hyeon;Jo, Yeong-Ran;Hwang, Jong-Won;Choe, Yeong-Seon
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.08a
    • /
    • pp.139-139
    • /
    • 2010
  • Ionic Transition Metal Complex based (iTMC) Light-emitting electrochemical cells (LEECs) have been drawn attention for cheap and easy-to-fabricate light-emitting device. LEEC is one of the promising candidate for next generation display and solid-state lighting applications which can cover the defects of current commercial OLEDs like complicated fabrication process and strong work-function dependent sturucture. We have investigated the performance characteristics of LEECs based on poly (3, 4-ethylenedioxythiophene):poly (styrene sulfonate) (PEDOT:PSS)-incorporated transition metal complex, which is tris(2, 2'-bipyridyl)ruthenium(II) hexafluorophosphate in this study. There are advantages using conductive polymer-incorporated luminous layer to prevent light disturbance and absorbance while light-emitting process between light-emitting layer and transparent electrode like ITO. The devices were fabricated as sandwiched structure and light-emitting layer was deposited approximately 40nm thickness by spin coating and aluminum electrode was deposited using thermal evaporation process under the vacuum condition (10-3Pa). Current density and light intensity were measured using optical spectrometer, and surface morphology changes of the luminous layer were observed using XRD and AFM varying contents of PEDOT:PSS in the Ruthenium(II) complex solution. To observe enhanced ionic conductivity of PEDOT:PSS and luminous layer, space-charge-limited-currents model was introduced and it showed that the performances and stability of LEECs were improved. Main discussions are the followings. First, relationship between film thickness and performance characteristics of device was considered. Secondly, light-emitting behavior when PEDOT:PSS layer on the ITO, as a buffer, was introduced to iTMC LEECs. Finally, electrical properties including carrier mobility, current density-voltage, light intensity-voltage, response time and turn-on voltages were investigated.

  • PDF

Visual Performance Evaluation Study of a Scaled Light-Shelf Model (축소모형을 이용한 광선반의 시환경 특성 평가 연구)

  • Cho, Yil-Sik;Kim, Byoung-Soo;Lee, Jin-Sook
    • Journal of the Korean Solar Energy Society
    • /
    • v.23 no.3
    • /
    • pp.63-71
    • /
    • 2003
  • According to the recent report, the lighting energy consumption of commercial buildings reaches to $30%\sim40%$ of the total energy consumption. It is more than that of cooling & heating energy consumption and it is the major target of energy-saving policy. It is obvious that they are interested in natural lighting device such as Light-shelf for the purpose of raising the lighting energy-saving efficiency. In most of highly developed countries, a thorough study on Light-shelf makes it possible to propose a practical plan while at home there leaves much to be desired to study a guiding principle of optimum plan in spite of its efficiency based on experiments using scale4 model and analysis of simulation. Aiming at making an optimum plan of Light-shelf suitable for the domestic situation, this study is worked by experiments using light-shelf and analysis of variables using illumination program. The experiments is to analyse the efficiency of Light-shelf on condition of the sky and the analysis is to make the simulation using illumination program. This study is composed of 1) the analysis of light with some variables such as presence of light-shelf and degree of angle using 1/2 scaled model 2) making the simulation using Lightscape, illumination program, In brief, concerning presence of light-shelf, it causes little difference in its efficiency in the overcast sky, whereas it decreases an illuminance of window side and provides inner side with the light, which decreases the ratio of the maximum to the minimum inner illuminance and makes the inner of illuminance to range evenly in the clear sky. On degree of angle, as the daylight increases in proportion of degree of angle, the ratio of the maximum to the minimum inner illuminance decreases, which makes it possible to increase the proportion of inner daylight.

Studies on Optimum Shading for Seedling Cultivation of Cornus controversa and C. walteri (층층나무와 말채나무 양묘(養苗)시 적정(適正) 차광율(遮光率)에 관한 연구(硏究))

  • Kim, Jong Jin
    • Journal of Korean Society of Forest Science
    • /
    • v.89 no.5
    • /
    • pp.591-597
    • /
    • 2000
  • This studies were carried out to investigate the optimum shading for seedling cultivation of Cornus controversa and C. walteri. The experiment was performed under five different shading scheme such as 100%, 50%, 30%, 10%, and 2% of the natural full sun light intensity for 7 months in the field condition. Two species showed the highest height growth under 50% of relative light intensity, and the highest diameter growth at root collar was observed both under 100% and 50% of relative light intensity. C. controversa seedlings grown under 50% of relative light intensity produced more total biomass than control seedlings, but root biomass was less in the seedlings under 50% of relative light intensity. In case of C. walteri, total biomass production of the seedlings under 50% of relative light intensity was lower than that of the seedlings under full sun light intensity, but leaves and shoot biomass was slightly high under 50% of relative light intensity. Great reductions of height growth and diameter growth at root collar, and biomass production were observed below 30% of relative light intensity in the both species. T/R ratio of the two species was highest under 30% of relative light intensity, and the chlorophyll content of the seedlings tended to be increased by reduction of relative light intensity.

  • PDF

Safety test of rubber-tired AGT light rail vehicle (고무차륜 AGT 경량전철 차량의 고장시 안전시험)

  • Kim Y.S.;Lim T.K.;Lee J.S.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2005.06a
    • /
    • pp.2024-2027
    • /
    • 2005
  • This study was aimed to prove the safety of rubber-tired AGT light rail vehicle, which was designed to have the redundant equipment for safety, so the experiment of this paper was operated in condition of malfunction which we made such as bake sequence test and momentary interruption test. The result can bes handled by Labview 7.0 and showed as the graph.

  • PDF

In-line Smart Oil Sensor for Machine Condition Monitoring (기계 상태진단을 위한 인-라인형 오일 모니터링 스마트 센서)

  • Kong, H.;Ossia, C.V.;Han, H.G.;Markova, L.
    • Tribology and Lubricants
    • /
    • v.24 no.3
    • /
    • pp.111-121
    • /
    • 2008
  • An integrated in-line oil monitoring detector assigned for continuous in situ monitoring multiple parameters of oil performance for predicting economically optimal oil change intervals and equipment condition control is presented in this study. The detector estimates oil deterioration based on the information about chemical degradation, total contamination, water content of oil and oil temperature. The oil oxidation is estimated by "chromatic ratio", total contamination is measured by the changes in optical intensity of oil in three optical wavebands ("Red", "Green" and "Blue") and water content is evaluated as Relative Saturation of oil by water. The detector is able to monitor oils with low light absorption (hydraulic, transformer, turbine, compressor and etc. oils) as well as oils with rather high light absorption in visible waveband (diesel and etc. oils). In a case study that the detector is applied to a diesel engine oil, it is found that the detector provides good results on oil chemical degradation as well as soot concentration.

Quality Management of ITO Thin Film for OLED Based on Relationship of Fabrication and Characteristics (OLED용 ITO박막의 공정조건과 품질특성 추론에 근거한 품질관리)

  • Seo, Jeong-Min;Park, Keun-Young;Lee, Sang-Ryong;Lee, Choon-Young
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.14 no.4
    • /
    • pp.336-341
    • /
    • 2008
  • Recently, research on a flat panel display(FPD) has focused on organic light-emitting display(OLED) which has wide angle of view, high contrast ratio and low power consumption. ITO(Indium-Tin-Oxide) films are the most widely used material as a transparent electrode of OLED and also in many other display devices like LCD or PDP. The performance and efficiency of OLED is related to the surface condition of ITO coated glass substrate. The typical surface defect of glass substrate is measured for electric characteristics and physical condition for transmittance and roughness. Since ITO coated glass substrate can be destroyed for inspection about surface roughness, sheet resistance, film thickness and transmittance, precise fabrication condition should be made based on the estimated relationship. In this paper, ITO films were prepared on the commercial glass substrate by the Ion-Plating method changing the partial pressure of gas(Ar, 02) and the chamber temperature between $200^{\circ}C$ and $300^{\circ}C$. The characteristics of films were examined by the 4-point probe, supersonic thickness measurement, transmittance measurement and AFM. We estimated the relationship between processing parameters(Ar gas, O2 gas, Temperature) and properties of ITO films (Sheet Resistance, Film Thickness, Transmittance, Surface Roughness).

Fabrication and Characterization of Polymer Microlens using Solvent-vapor-assisted Reflow (솔벤트 증기처리 Reflow를 이용한 폴리머 마이크로 렌즈 제작 및 특성고찰)

  • Yang, Seung Woo;Kim, Sin Hyeong;Kim, Bo Hyun;Cho, Young Hak
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.32 no.3
    • /
    • pp.299-305
    • /
    • 2015
  • In this paper, we propose a simple and low-cost fabrication method of polymer microlens using solvent-vapor-assisted reflow (SVAR). Metal molds for replication of polymer were fabricated using micro milling and the cylindrical shape of polymer was imprinted using hot-embossing process. The cylindrical shape of polymer was changed to hemispherical lens shape by SVAR. The characteristics of fabricated microlens were evaluated according to the condition of SVAR such as temperature and time. The focal length of polymer microlens could be controlled more easily in low-temperature and long-time condition than in high-temperature and short-time condition. That is, the level of concentrated light to focal point could be improved through the control of temperature and time. Also, we confirmed that toluene was more appropriate solvent than acetone in fabrication of PMMA polymer microlens using SVAR.

Natural Dyeing of Sangju Silk with Mulberry Extract Solution (오디 추출액을 이용한 상주실크의 천연염색)

  • Lee, Kwang-Woo;Lee, Jun-Hee;Eum, Su-Jang;Bae, Eun-Mi;Kim, Tae-Yeon;Yoon, Seok-Han
    • Textile Coloration and Finishing
    • /
    • v.22 no.3
    • /
    • pp.207-213
    • /
    • 2010
  • Natural dyeing of Sangju silk for graveclothes with mulberry extract solution was studied. The anthocyanidin dye in the extracted mulberry solution was markedly influenced by pH condition, which resulted in the changed maximum light absorption from a $\lambda$max of 525nm in acidic condition to 380nm in alkaline condition possibly due to the irreversible transformation of anthocyanidin to cyanidin form of the dye. The color fastness properties to both light and washing were good when the fabrics were dyed at $80^{\circ}C$ with the mulberry-extracted solution upto twice extraction.