• Korean Journal of Plant Resources
• /
• v.22 no.4
• /
• pp.349-358
• /
• 2009

The potential use of 4 plant species, Astragalus membranaceus var. membranaceus, Senna occidentalis, Dianthus longicalyx and Plantago asiatica, as new sprout vegetables with high antioxidant function was examined in the present experiments. Seeds of above plants were allowed to germinate under light condition, and seedlings were maintained under dark condition for shoot growth in length for contain period of time. Then the seedlings were put under light for photosynthesis (greening treatment) for the period of 0${\sim}$3 days. Samples were collected to analyze the changes in antioxidant levels and activity, and it was observed that antioxidant substances were affected by greening treatments, depending on plant species. In A. membranaceus, the contents of total polyphenol was highest with no greening, total flavonoids with 3 days greening, DPPH radical scavenging effects with no greening, ABTS scavenging with 1 day greening, $Fe^{2+}$ chelating effects with no greening, and inhibitory activity against linoleic acid peroxidation with 3 day greening. In S. occidentalis, highest levels of antioxidant activity and radical scavenging effects were obtained by 2 day greening, $Fe^{2+}$ chelating effects by no greening and inhibitory activity against linoleic acid peroxidation by 1 day greening. In D. longicalyx, highest levels of antioxidant activity and $Fe^{2+}$ chelating effects were obtained by 2 day greening, $Fe^{2+}$ chelating effects by no greening and inhibitory activity against linoleic acid peroxidation by 1 day greening. In D. longicalyx, highest levels antioxidant activity and $Fe^{2+}$ chelating effects were observed with 3 day greening, and highest radical scavenging effects and inhibitory activity against linoleic acid peroxidation with no greening treatment. In P. asiatica, antioxidant activity and radicals scavenging effects were highest with 2 day greening, whereas highest chelating effects was obtained with no greening and highset inhibitory activity against linoleic acid peroxidation with 3 day greening. As the length of greening treatments influenced the antioxidant levels and function in plant species tested in this experiments, different culture methods are recommended for different plant species to get maximum health benefits out of sprout vegetables.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.619-625
• /
• 2005

This study has been carried out to examine the characteristics of anti-H. pylori antibodies of milk produced from cows immunized with antigen of Helicobacter pylori such as peculiarity of antigen antibody, agglutination of H. pylori strain, stability of antibody against acid, alkali and heat treatments. The molecular weight of anti-H. pylori antibody measured by SDS-PAGE were turned out as about 50 kDa in the heavy chain and about 24 kDa in the light chain. Twenty protein bands were visualized in H. pylori interacting with anti-H. pylori antibody which was made in dairy cow by immunization with H. pylori. The western blotting was peformed in order to examine the antigen peculiarity of anti-H. pylori, The results were all 7 antigen substances including serum, furified serum, whey and furified whey could be confirmed and the major antigen substances were 97, 66,34 kDa of molecular weight. As a result of agglutination response anti-H. pylori antibody in whey showed 1/10 agglutination value against H. pylori. In stability test about acid and alkali of antibody, there was $100\%$ activated at the range of $pH5\~pH10$. In stability test about heat, the antibody showed stable condition at $60^{\circ}C$ for 60 minutes and comparatively stable condition at $70^{\circ}C$, but reduced activation to $40\%$ after 60 minutes. It maintained $77\%$ activation at $80^{\circ}C$ for 4 minutes and comparatively stable at $100^{\circ}C$ for 1 minute.

• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.135-145
• /
• 1983

This study was conducted to obtain the fundamental data for the processing of carrot juices and know the effects of blanching conditions, acid and alkali treatments and sterilization on the quality factors of carrot juices. The result obtained was as follows. 1. Blanching condition, $100^{\circ}C$, 5min. was the most effective for the Brix, amino-N content, suspended solid, light transmittance and yield of carrot juices among $90^{\circ}C$, 15min., $95^{\circ}C$, 10 min., and $100^{\circ}C$, 5min. 2. 0.05N-acetic acid solution was the most effective blanching solution for the suspended solid, light transmittance, viscosity and yield of the juices compared to 0.05N-citric acid and 0.03N-hydrochloric acid solution. 3. The color changes during the processing of carrot juices caused by blanching process rather than sterilization process. 4. The ${\beta}$-carotene in carrot juices was very stable and about 80 % of it was remained in the carrot juice which had been blanched, extracted and sterilized at $115^{\circ}C$ for 30min. 5. Alkali treatment for the juice from acid - blanched carrots formed discoloration after sterilization. 6. Relative content (%) of sugars in raw carrot juice we re ribose, 8.51%; fructose. 10.15%; glucose, 12.25%; sucrose, 49.53% and oligosaccharide, 19.56%. When the carrots were blanched in boiling water, the contents of monosaccharide and disaccharide decreased slightly but that of oligosaccharide increased slightly, however, when the carrots were blanched in acid solution, and then neutralized and sterilized, relative contents of ribose and sucrose decreased remarkably but that of oligosaccharide increased considerably and those of glucose and fructose increased slightly. 7. Nineteen sorts of free amino acid were detected from the carrot juices and the mains of them were threonine+asparagine, alanine, serine+glutamine, aspartic acid, arginine, and glutamic acid.

• Korean Journal of Optics and Photonics
• /
• v.20 no.5
• /
• pp.266-271
• /
• 2009

We designed a thermo-optic switch based on a directional coupler with not only a high extinction ratio but also significantly low power consumption. The switch operates by using the thermo-optic effect of the polymer which the refractive index changes by heating the electrode. If the electrode is not powered (OFF), the input light will be coupled completely to the other waveguide. When the electrode is powered at a certain level (ON), input light launched into the input waveguide will remain in that waveguide due to the lower index adjusted in the other waveguide. The switch based on the directional coupler was designed using the generalized extinction ratio curve and the lateral shift of the input waveguide. The coupling length is 1,610 ${\mu}m$ and the extinction ratios are -28 and -30 dB for ON and OFF states, respectively. The electrode structures were optimized by thermal analysis. The transported heat into the waveguide is increased, as the electrode width (w) is increased and the center distance between the electrode and the waveguide (d) is decreased. Also, because the heat generated in the electrode affects the other waveguide, the temperature difference between two waveguides is varied as the given w and d. There are specific conditions which have the maximum of the temperature difference. That of the temperature difference is increased as the width and the temperature of the electrode are increased. Especially, when the switch is designed using the condition with the maximum of the temperature difference for switching, the temperature of the electrode can be decreased. We expect this condition will be the novel method for the reduction of the power consumption in a thermo-optic switch.

• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.37-45
• /
• 2021

This study was conducted to evaluate the growth characteristics, phenolic concentration and antioxidant capacity of safflower (Carthamus tinctorius L.) and amaranth (Amaranthus spp.) sprout and investigate the possibility of using super absorbent polymer (SAP) as a medium in hydroponic cultivation in a plant factory. The control was used a commercial sprout cultivation tool (19 × 14 × 9 cm, W × D × L), and a treatment (SAP) was added on the cultivation tool to compare the effect of SAP. Safflower sprouts were immersed in a distilled water at 30 ℃ for 5 hours, and then grown in a plant growth chamber. The temperature and relative humidity were maintained at 25 ± 1℃ and 70 ± 4%, respectively. The light condition was maintained at 35 ± 6 μmol·m-2·s-1 (12h). Amaranth sprouts were grown in a plant growth chamber maintained with temperature of 25 ± 2℃, relative humidity of 70 ± 5% and light condition of 188 ± 10 μmol·m-2·s-1 (16h). A physical and chemical characteristic of SAP, and a germination rate, growth characteristics and secondary metabolites were analyzed in both safflower and amaranth. There was no significant effect on SAP in a germination rate, growth and secondary metabolites of safflower compared to the control, whereas amaranth grown under SAP was higher in germination rate, dry weight, phenolic concentration, and antioxidant capacity compared to the control. As a result, this study was suggested that cultivation of sprouts using SAP would be possible in a plant factory, and further studies on SAP on plant physiological response are required.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.137-142
• /
• 1998

Assessment of N release pattern from hairy vetch (Vicia villosa Roth) residue is an important step for the efficient use of the residue as a green manure and the specific management strategy development. Objective of this research was to determine the changes of chemical composition, especially in light of the N release, when the residues of hairy vetch were applied in the soil. hairy vetch was harvested at different growth stages (April 23, May 9, and May 28) and the residues were encapsulated in the nylon mesh (1 mm) bag. The bags were placed on the surface of no-tillage plots and buried at 15cm in depth in conventional tillage plots of the corn field in early June. The bags were removed for measurements of dry matter and N content at 1, 2, 3. 5, 8 and 12 weeks after placement. Dry matter and N content of hairy vetch were higher when harvested closer to maturity, as also found in C/N ratio, cellulose and hemicellulose contents. The rate of N releases from hairy vetch residue under conventional tillage condition was greater than that under no-tillage condition. Percentages of N remaining in residue over the initial N contents under conventional tillage condition were in average 40, 23, and 15% for 1, 2, and 3 weeks after placement of mesh bag, respectively, compared with respective values of 71, 31, and 21% under no-tillage condition. The rate of N release was slower as the harvest time was closer to maturity of hairy vetch under both tillage conditions. Most of N in residue was released within 3 and 5 weeks, under conventional and no-tillage conditions, respectively. Results indicated that amounts of N released from hairy vetch residue were more closely related to the variability of N contents in residue due to the harvest time than changes of chemical composition of plant or soil management.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.161-174
• /
• 2011

The purpose of this study was to evaluate the effect of ethanol addition on efficacy of two-step total-etch adhesive under over-wet condition by measurement of remaining volatile part (RVP), microtensile bond strength (${\mu}TBS$), and degree of conversion (DC). Two-step total-etch adhesive, Optibond Solo Plus (Kerr, Orange, USA), was used. Experimental groups were divided into 8 groups: Group 1 (only 10 ${\mu}l$ adhesive), Group 2 (mixture of 3 ${\mu}l$ distilled water and 10 ${\mu}l$ adhesive), From Group 3 to Group 8 (mixture of 3 ${\mu}l$ distilled water, 10 ${\mu}l$ adhesive, and ethanol added in 1 ${\mu}l$ increment from 1 ${\mu}l$ to 6 ${\mu}l$). The mixtures were placed on slide glass and evaporated for 10 s, 30 s, and 60 s by air-drying. The weight of RVP was measured by precision weight. Same procedures were performed for ${\mu}TBS$ test and measurement of DC. The condition of mixed solution was observed under light microscope. For RVP weight, the weights of experimental groups except for group 1 decreased with the increase of air-drying time (p<0.05). The DC increased with the increase of air-drying time in only group 5 and 6 (p<0.05). The ${\mu}TBS$ increased with the increase of air-drying time in group only 5, 6, and 7 (p<0.05). The phase separation was examined and water blisters were diminished with the increase of air-drying time in group 5, 6, 7, and 8. Within the limits of this study, ethanol additionally applied to adhesive decreased RVP and increased DC and ${\mu}TBS$ under over-wet condition. It was shown that the addition of ethanol to two-step total-etch adhesive under over-wet condition would remove water and increase the efficacy of adhesive.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.6
• /
• pp.367-370
• /
• 2007

To make the soil moisture proper is the important factor in the seedbed cultivation of Yangjik for producing a good quality of ginseng seedling. This study was carries out to investigate the effect of soil moisture on photosynthesis and yield of ginseng seedling under the different condition of the soil moisture, such as $100{\sim}400$ mbar. Photosynthesis rate was decreased gradually by the reduction of soil moisture, and in particular it was decreased distinctly under the lower condition of soil moisture, such as $300{\sim}400$ mbar. Photosynthesis rate in air temperature of $30^{\circ}C$ was decreased more distinct than that of $25^{\circ}C$, Light saturation point of leaves was at the quantum of $600{\mu}mol/m^3/s$ at $25^{\circ}C$ while it was decreased by $300{\mu}mol/m^3/s$ at $30^{\circ}C$ according to the increase of air temperature. Respiration rate was increased by the increase of quantum, and decreased by the reduction of soil moisture. Respiration rate under the condition of high quantum was increased regardless of air temperature, but it was decreased distinctly under the condition of low soil moisture and high air temperature, such as 400 mbar at $30^{\circ}C$. There were a gradual decrease by the reduction of soil moisture in leaf length, leaf width, chlorophyll content, and water content of leaves, but heat injury ratio was increased distinctly by the reduction of it. Total root weight, root weight per plant, the yield of usable seedling were decreased by the reduction of soil moisture, and optimal content of soil moisture to produce a good quality of seedling was 63% of field capacity or 18.9% in absolute soil moisture content.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.2
• /
• pp.85-91
• /
• 2004

The objective of this study is to determine the optimum conditions of operational parameters using factorial design for phenol degradation in photocatalytic oxidation reactors. Factorial design is widely used to select the dominant factors and their ranges in experiments involving several factors where it is necessary to study the effect of factors on a response. The effects of initial concentration of phenol, intensity of UV light and surface area of catalyst on phenol degradation were investigated. Two levels were considered in this study so that the experiment was a $2^3$ factorial design with three replicates. The experimental results show that an increase in initial concentration of phenol from 5 to 50 mg/L intensity of UV light from 5,000 to $20,000\;{\mu}W/cm^2$, and surface area of catalyst from 740 to $2,105\;cm^2$ enhanced the phenol degradation rate by an average of 1.86, 1.79, and 2.10 mg/L hr, respectively. Interaction effects do not appear to be as large on the phenol degradation rate as the main effects of single factors. The optimum working condition for photocatalytic oxidation reactors, despite the higher three factors the better removal rate, is the highest surface area or catalyst.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.174-175
• /
• 2012

(In, Ga) N-based III-nitride semiconductor materials have been viewed as the most promising materials for the applications of blue and green light emitting devices such as light-emitting diodes (LEDs) and laser diodes. Although the InGaN alloy can have wide range of visible wavelength by changing the In composition, it is very hard to grow high quality epilayers of In-rich InGaN because of the thermal instability as well as the large lattice and thermal mismatches. In order to avoid phase separation of InGaN, various kinds of structures of InGaN have been studied. If high-quality In-rich InGaN/GaN multiple quantum well (MQW) structures are available, it is expected to achieve highly efficient phosphor-free white LEDs. In this study, we proposed a novel InGaN double hetero-structure grown on GaN nano-pyramids to generate broad-band red-color emission with high quantum efficiency. In this work, we systematically studied the optical properties of the InGaN pyramid structures. The nano-sized hexagonal pyramid structures were grown on the n-type GaN template by metalorganic chemical vapor deposition. SiNx mask was formed on the n-type GaN template with uniformly patterned circle pattern by laser holography. GaN pyramid structures were selectively grown on the opening area of mask by lateral over-growth followed by growth of InGaN/GaN double hetero-structure. The bird's eye-view scanning electron microscope (SEM) image shows that uniform hexagonal pyramid structures are well arranged. We showed that the pyramid structures have high crystal quality and the thickness of InGaN is varied along the height of pyramids via transmission electron microscope. Because the InGaN/GaN double hetero-structure was grown on the nano-pyramid GaN and on the planar GaN, simultaneously, we investigated the comparative study of the optical properties. Photoluminescence (PL) spectra of nano-pyramid sample and planar sample measured at 10 K. Although the growth condition were exactly the same for two samples, the nano-pyramid sample have much lower energy emission centered at 615 nm, compared to 438 nm for planar sample. Moreover, nano-pyramid sample shows broad-band spectrum, which is originate from structural properties of nano-pyramid structure. To study thermal activation energy and potential fluctuation, we measured PL with changing temperature from 10 K to 300 K. We also measured PL with changing the excitation power from 48 ${\mu}W$ to 48 mW. We can discriminate the origin of the broad-band spectra from the defect-related yellow luminescence of GaN by carrying out PL excitation experiments. The nano-pyramid structure provided highly efficient broad-band red-color emission for the future applications of phosphor-free white LEDs.