• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.1
• /
• pp.129-142
• /
• 2021

This study aims to identify the perception of New-Hanbok one-piece dresses that female consumers have purchased and to analyze the design preference based on design types and brands. Analysis was conducted on New-Hanbok brand websites, and additional research was carried out through a survey of 402 women in their 20s and older. The survey consisted of 36 questions, which were divided into categories including pattern, color, material, and recognition of the one-piece dress. The research results are as follows. First, the preferred design form of the New-Hanbok one-piece dress was long length, medium fit, princess line, round git, rectangular git, regular width git, V neckline, regular width dongjeong, front closing with a wide overlap of the chest are a, narrow goreum, a skirt part with moderate crease spacing and number of pleats, A-line skirt silhouette, long and narrow sleeves, diagonal shoulder line, and a cuff at the end of each sleeve. Second, the preferred colors of the New-Hanbok one-piece dress were bright, neutral, or light and were predominately monochromatic Third, the preferred fabric conveyed a contemporary atmosphere through its print pattern. The most favored fabric material was cotton. Through this study, more systematic design development research should be carried out focusing on the current situation and identifying problems, thereby improving traditional culture.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.123-127
• /
• 2021

Millimeter-wave tracking radars should be operated in various environmental restrictions, thus they demand more computing power and smaller size compared to conventional tracking radars. This paper presents the design and implementation of the compact power supply for millimeter-wave tracking radar applications. To meet requirements of low voltage/high current and voltage accuracy for FPGA/DSP digital circuits, Point of Load (POL) converters are used in order to enhance power density and system efficiency. LDO (Low Dropout) is applied for the output voltage under the light load condition, then the single-input-multi-output power supply with max power of 375 W and 8 outputs is developed. The proposed power supply achieves output voltage accuracy of ±2 % and noise level of <50 mVpp % under full load conditions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1349-1354
• /
• 2021

An All-in-one LED lantern is a light device to determine the fairway of ships in operation. The current all-in-one LED lantern powered by solar energy is challenged by insufficient power capacity due to limited sun hours. This article presents an all-in-one 9-Nautical mile LED lantern driven by solar and wind power that is abundant maritime renewable energy. Furthermore, the remote smart monitoring system is developed. A smart control system capable of remote control of the lantern was implemented by using the LED lantern device and monitoring system as IoT. This technology that realtime condition monitoring and remote control are developed for safe ship navigation. We expect that maintaining the accuracy and consistency of LED lanterns prevents marine accidents and reduces social costs.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.57-63
• /
• 2023

In this study, an organic-inorganic hybrid composite of Abaca nanocellulose and titanium dioxide was prepared. Abaca nanocellulose was prepared by oxidizing Abaca cellulose using TEMPO (2,2,6,6-tetramethyl-piperidine-1-oxyl) as a catalyst. Titanium dioxide nanoparticles were prepared by the sol-gel method, and a composite was prepared by hybridizing them with nanocellulose. As a result of comparing the properties of the composite and its physical properties according to the change in manufacturing pH, the effect of pH was very large when combining nanocellulose and titanium dioxide, and the optimal bonding performance was shown at pH 8 in this experimental condition. In addition, the prepared composite showed photocatalytic properties, and the higher the content of titanium dioxide, the higher the hydrophilicity of the composite according to UV light irradiation.

• Health Policy and Management
• /
• v.4 no.1
• /
• pp.138-175
• /
• 1994

The objectives of this study are (i) to review current situations and problems of the occupational health care system with emphasis on reforming the organizations and services, (ii) to find out a disirable occupational health system model based on integration of the occupational health system and the general health system, and finally, (iii) to suggest policy implications in occupational health services in the light of objectives of the newly emerging national health insurance reform in Korea. The major policy implications of this study are as follows: 1. In the long-run, within the occupational health system, preventive occupational health services such as employees' physical check-up, working environment examination, etc should financially be integrated with industrial accident compensation insurance. Currently separately paying expenses for each different category of services by the owner of an enterprise should be disbursed once through the payment of contributions of industrial accident compensation insurance. And then, it is necessary to strengthen and expand the role and function of industrial accident compensation insurance to cover preventive occupational health services. 2. The occupational health system should be integrated with general health system for its effective management. For the short-term policy, it is necessary to eliminate fiscal and access barrier between industrial accident compensation insurance and national health insurance by means of ex post facto settlement of accounts. The duplication of employees' physical check- ups between under the health insurance program and under the industrial health services must be coordinated in a manner either through mutual authorization by the two parties concerned or through merge into the health insurance. 3. The intent of current employees' physical check-up system focused on detection of occupational diseases, should be converted to an idea of medical surveillance system or biological moritoring system. The introduction of medical surveillance or biological monitoring system is a necessary condition to build a positive, effective and inexpensive occupational health care system.

• Steel and Composite Structures
• /
• v.46 no.4
• /
• pp.497-512
• /
• 2023

Using light weight concrete as infill material in conventional cold-formed steel (CFS) shear wall systems can considerably increase their load bearing capacity, ductility, integrity and fire resistance. The compressive strength of the filler concrete is a key factor affecting the structural behaviour of the composite wall systems, and therefore, achieving maximum compressive strength in lightweight concrete while maintaining its lightweight properties is of significant importance. In this study a new type of optimum polystyrene lightweight concrete (OPLC) with high compressive strength is developed for infill material in composite CFS shear wall systems. To study the seismic behaviour of the OPLC-filled CFS shear wall systems, two full scale wall specimens are tested under cyclic loading condition. The effects of OPLC on load-bearing capacity, failure mode, ductility, energy dissipation capacity, and stiffness degradation of the walls are investigated. It is shown that the use of OPLC as infill in CFS shear walls can considerably improve their seismic performance by: (i) preventing the premature buckling of the stud members, and (ii) changing the dominant failure mode from brittle to ductile thanks to the bond-slip behaviour between OPLC and CFS studs. It is also shown that the design equations proposed by EC8 and ACI 318-14 standards overestimate the shear force capacity of OPLC-filled CFS shear wall systems by up to 80%. This shows it is necessary to propose methods with higher efficiency to predict the capacity of these systems for practical applications.

• Korean Journal of Agricultural Science
• /
• v.49 no.1
• /
• pp.129-136
• /
• 2022

In this study, we aimed to develop a maturity classification model for tomatoes using hyperspectral imaging in the range of 400 - 1,000 nm. Fifty-seven tomatoes harvested in August and November of 2021 were used as the sample set, and hyperspectral data was extracted from the surfaces of these tomatoes. A combined method of SNV (standard normal variate) and SG (Savitzky-Golay) methods was used for the pre-processing of the hyperspectral data. In addition, the hyperspectral data were analyzed for all maturity stages and considering bandwidths with different FWHM (full width at half maximum) values of 2, 25, and 50 nm. The PCA (principal component analysis) method was used to analyze the principal components related to maturity stages for the tomatoes. As a result, 500 - 550 nm and 650 - 700 nm bands were found to be related to the maturity stages of tomatoes. In addition, PC1 and PC2 explained approximately 97% of the variance at all FWHM conditions and thus were used as input data for classification model training based on the SVM (support vector machine). The SVM models were able to classify tomato maturity into five stages (Green, Turning, Pink, Light red, and Red) with over 95% accuracy regardless of the FWHM condition. Therefore, it was considered that hyperspectral data with 50 nm FWHM and SVM is feasible for use in the classification of tomato maturity into five stages.

• Earthquakes and Structures
• /
• v.24 no.1
• /
• pp.11-20
• /
• 2023

"Performance-based design (PBD)" is based on designing a structure with choosing a performance target under design criteria to increase the structure's resistance against earthquake effect. The plastic hinge formation is determined as one of the fundamental data in finite elements nonlinear analysis to distinguish the condition of the structure where more significant potential damage could occur. If the number of plastic hinges in the structure is increased, the total horizontal load capability of the structure is increased, also. Theoretically, when the number of plastic hinges of the plane frame structure reaches "the degree of hyperstaticity plus one", the structure will reach the capability of the largest ultimate horizontal load. As the number of plastic hinges to be formed in the structure increases towards the theoretical plastic hinge number (TPHN), the total horizontal load capability of the structure increases, proportionally. In the previous studies of the authors, the features of examining the new performance criteria were revealed and it was formulated as follows "Increase the total number of plastic hinges to be formed in the structure to the number of theoretical plastic hinges as much as possible and keep the structure below its targeted performance with related codes". With this new performance criterion, it has been shown that the total lateral load capability of the building is higher than the total lateral load capability obtained with the traditional PBD method by the FEMA 440 and FEMA 356 design guides. In this study, PBD analysis results of structures with frame carrier systems are presented in the light of the Turkey Building Earthquake Code 2019. As a result of this study, it has been shown that the load capability of the structure in the examples of structures with frame carrier system increases by using this new performance criterion presented, compared to the results of the examination with the traditional PBD method in TBEC 2019.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.19 no.1
• /
• pp.1-13
• /
• 2023

Many government in the world have conducted building energy performance certification program to reduce building energy consumption. In this study, a reference building and its HVAC system was modeled, and the energy load and consumption were estimated by the ECO2 program. The software is a simple building energy simulation program based on monthly calculated method. The building energy efficiency rating the the reference building was 1+ under baseline condition. The simulation results showed that the insulation performance slightly affected building energy load and consumption, but light density had a significant effect on them. The application of geothermal heat pumps gave improvement of building energy efficiency rating but it could not make it possible to get zero energy building(ZEB) certification. The ZEB 5 certification could be achieved by using photovoltaics, however getting better grade was difficult. The simulation results showed that the ZEB 4 certification, one grade higher than ZEB 5, could be attained by using more than one renewable energy source such as geothermal and solar energy in this study.

• Asia Marketing Journal
• /
• v.17 no.4
• /
• pp.21-42
• /
• 2016

Purpose: Social influence has a decisive role in shaping a person's cognition and behavior. Chinese face consciousness, including moral component, is an important part of Chinese traditional culture, which influences people to implement moral behavior. With both eye-tracking technology and traditional questionnaire, this research aims to explore people's moral psychology and the psychological processing mechanisms of Chinese face consciousness, as well as the impact of Chinese face consciousness on the preference for the ecological product. Method and Data: 75 college and MBA students' eye movement data were collected when they read different kinds of moral materials, as well as data from the subsequent questionnaires. To test the hypothesis, ANOVA analysis and Heat Map analysis were performed. Besides, the PROCESS of bootstrap was used to test mediation effect. Findings: The results reveal that: 1. Compared to the moral-situation reading, when subjects read immoral situations, they need more processing time due to the moral dissonance and cognitive load. 2. Compared to the control condition, when threatened moral self is primed, subjects prefer to choose ecological product. 3. Protective face orientation is the mediator between threatened moral self and preference to ecological product. Key Contributions: First, this study broadens the use of eye-tracking technology in marketing and demonstrates a better understanding of the relationship between morality and consumer behavior in a more scientific way. Second, this study not only distinguishes the meanings between "protective face orientation" and "acquisitive face orientation", but also innovatively validates that when moral self is threatened, consumers tend to choose ecological product as moral compensation in order to protect their face. It can shed light on the promotion of ecological product in practical applications.