• Journal of Mushroom
• /
• v.5 no.2
• /
• pp.81-85
• /
• 2007

This study was carried out to investigate the conditions of liquid culture and fruiting body formation of Cordyceps militaris using grain mediacontained the brown rice and black purple rice. Liquid mycelial growth and density of Cordyceps militaris were the highest in the medium of malt extract 0.7% and pH 5.0~5.5. The optimal condition of formation the fruiting bodies were shown to be temperature of $17^{\circ}C$, light intensity of 600 lux, $C0_2$ of 500ppm and humidity intensity of 95% produced highest amount of fruit bodies.

• Journal of the Korean Society for Library and Information Science
• /
• v.41 no.1
• /
• pp.373-389
• /
• 2007

The most remarkable business model to Have merged in electronic publishing is the so-called 'Big Deal'. Major Publishers have begun offering libraries bundled packages that are across journals and across print and electronic versions. This paper examined consortium conditions of scholarly journals in the light of big deal. The result skewed that various pricing models have been appeared and freedoms to choose collections have been on the increase in comparison with the past. But many major Publishers have adopted a typical big deal contract condition that a library enters into a long-term arrangement to get access to large electronic journal collections at a dramatic discount interchange of a promise not to cut print subscriptions. The publishing and library communities need to find alternative pricing models that provide better deals for those disadvantaged by the prevalence of the big deal. Much in the world of scholarly publication is changing, combination of traditional publishing and open access publishing may well be gained public favor in the future.

• Korean Journal of Agricultural Science
• /
• v.9 no.2
• /
• pp.591-595
• /
• 1982

In order to know about chemical properties of a commercial organofluoro rodenticide, $Kiratol-F^{(R)}$, this experiment was carried out. Chemicals from different two manufactures were compared with synthetic compound by Gas Chromatograph and NMR-spectrophotometer. The results were as followings; 1. The permitted active ingrdient of Kiratol-F, ${\beta}$-fluoro-ethylacetate, was not identified, but ${\beta}$-fluoroethanol was a new active ingradient. 2. Kiratol-F was a water soluble liquid containing samll amounts of chloroethanol in impurity. 3. Yield of synthetic fluoroethanol was about 50%, but the composition of the reactant was assumed ${\alpha}$- and ${\beta}$-fluoroethanol, and the light condition was better than the dark in yield. 4. It was not become known any breakdown of active ingredient by the different dilutions and time intervals. So, the secondary toxicity of Kiratol-F might be relatively higher than imagination.

• Korean journal of applied entomology
• /
• v.34 no.2
• /
• pp.106-111
• /
• 1995

This study was carried out to investigate the effect of mass trapping with synthetic sex pheromone on seasonal occurrence of, the Beet amyworm (BAW) Spodoptera exigua, and on suppress of their density in Chonnam province from 1992 to 1994. Adult males of BAW were colllected by the trap from early through early November. The numbers began to increase abruptly from early July, and forming three peaks on mid July, early August and early September. Yearly occurrence and the area damaged by the BAW varied in relation to weather condition. Especially, low temperature and heavy rainfall in August 1993 seems to have affected to reduce the BAW population. The pheromone trap attracted higher numbers (1.5~2.3 times) of BAW adult than ordinary light rap. And the BAW population in vinyl hose was noticeably reduced when more than 10 pheromone traps were operated per 330$\m^2$ of vinyl house.

• Korean Journal of Plant Resources
• /
• v.9 no.3
• /
• pp.274-278
• /
• 1996

This study was conducted to examine the dry matter production and leaf photosynthesis under different fertilizer application in Yacon(Polymnia sonchifolia)plants. Under field conditions, dry matter production of stable mature application plot(S-1) was much larger than non-treated control plot(CTL), but bulb dry weight of 10kg nitrogen application plot per 10a (N-10) was not differentiated from CTL. The maximum photosynthetic rates increased in Yacon plants grown at S-1 while in the rates of CTL reduced under glasshouse in the same treated pot condition. The optimum temperature for the highly photosynthetic rates is about $34{\pm}3^{\circ}C$, and the rates did decrease by stomatal resistance below 28℃. The estimated light saturation point was $1200{\mu}mol{\cdot}m^{-2}s^1$. The results of this study indicate that soil conditions were highly related to dry matter production and leaf photosynthesis rate in Yacon plants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.1
• /
• pp.55-62
• /
• 2015

This study investigated the thermal insulation of an air-cell pack embedded jacket and down jackets to understand the potential of air-cell pack as a filler for winter outdoor wear. A thermal manikin measured the thermal insulation of the following jackets: HD (heavy down jacket, total weight (Tw) 750g, goose down weight (Dw) 350g), LD (light down jacket, Tw 560g, Dw 140g), AF (air-cell pack embedded jacket, Tw 490g, trunk goose down in LD was replaced to air cell), F (film jacket, Tw 469g, but removed the air in the air-cell pack from the AF), and Control (control jacket, Tw 438g, removed the air-cell pack film from the F). Thermal insulations of each experimental condition were measured in a static standing posture. Total thermal insulations (IT) were 1.29clo (HD), 1.23clo (LD), 1.16clo (AF), 1.20clo (F), and 1.08clo (Control). Body regional thermal insulation was higher in the chest and back than in the abdomen and hip in all conditions. The results suggest that an economical and versatile outdoor jacket with superior thermal insulation will be feasible if the air volume is properly controlled in air-cell pack embedded jackets in consideration of regional different distribution and used in combination with film and down.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.2
• /
• pp.122-127
• /
• 2000

A stream purification system was applied to the upper reaches of the Masan Reservoir to improve the water quality. This system consisted of two channels which were constructed on both sides of the stream, one side packed with crushed gravels and the other with plastic filter media. The system operated under low pollutant concentrations and high hydraulic loadings during a dry season to avoid clogging of the filter media. Removal rate and efficiency of chemical oxygen demand (COD) in the channel packed with crushed gravel were $14.8g/m^3/d$ and 11.5%, and for the channel with plastic filter media, $50.1g/m^3/d$ and 13.5%, respectively. Removal efficiencies of total phosphorus (T-P) were 6.6% (gravel) and 10.0% (plastic media). These results indicated plastic filter media having relatively high specific surface areas were more efficient than crushed gravels in removing pollutants. However, due to low influent water quality during dry season, the removal efficiencies were low. The proportion of nitrate nitrogen to total nitrogen (T-N) of the inflow was high but, as the system operated under aerobic condition, nitrate nitrogen could not denitrified. Accordingly, total nitrogen was not attenuated with this system. To improve the reservoir water quality effectively, this system should be able to treat the storm runoff containing higher pollutant loadings. When the filter materials are clogged by the storm runoff instead of backwashing, it would be more efficient to replace them, Therefore, the use of natural materials which are light, easily obtaining and replaceable, and have high specific surface areas is recommended.

• Journal of radiological science and technology
• /
• v.5 no.1
• /
• pp.35-43
• /
• 1982

The authors surveyed the cassettes in 10 general hospitals and compared in experimentation on performances of 6 kinds of cassettes manufactured with several materials in order to discover the present condition and performance of the cassettes being used at present. And the authors got the following results. 1. In distribution of the cassettes in use, Okamoto's(Japan), Picker's and Titan's(U.S.A.) were more than others classified by the manufacture. The rate of using high speed was 72.0%, par speed 28.0% classified by types of intensifying screens in the cassettes and the rate of the year in use for $4{\sim}5$ years was 40.0%, $6{\sim}7$ years 24.0% classified by the years in use. 2. The results of the screen-film contact test were that tile ordinary was 42.7%, the good 36.0%, and the poor 21.3%. 3. The results of the test for light leakage were that fogged area appeared on 1 side or more in 84.0% films. 4. In Aluminum equivalents of front plate, the cassettes with a front plate consisting of carbon fiber were fewest, and the ones of bakelite and aluminum were fewer in order 5. In compared results of the exposure dosage for same density of the films, the exposure of the cassettes used carbon fiber for the material on the front plate was smallest and bakelite, auminum was smaller in order.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.6
• /
• pp.447-451
• /
• 2000

This study was conducted to establish a regeneration system of plantlets through callus culture induced from bulb scales of Lillium‘Gelria’. Friable callus was induced very easily from bulb scales, and grew vigorously on medium lacking growth regulators. In media with 0.5∼ 1.0 mg/L kinetin and 0.1 ∼ 1.0 mg/L NAA, 100% of explants produced callus. Proliferation of callus was actively occurred on media containing 0.1 ∼ 1.0 mg/L kinetin and 0.1 ∼ 1.0 mg/L NAA. Callus proliferation and regeneration of bulblets from callus were occurred simultaneously. Light condition was more effective for the callus proliferation and solid medium was better than liquid medium. Althrough callus was proliferated vigorously on media containing 0.1 ∼ 1.0 mg/L BA and NAA, the frequncy of plantlet regeneration was better on medium without growth regulators, then on medium with 0.1 mg/L BA and NAA.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.63-71
• /
• 2004

Recently, a sheet forming process of Mg alloys is highlighted again due to increasing demand for Mg wrought alloys in the applications of casings of mobile electronics and outer-skins of light-weight transportation. Microstructure control is essential for the enhancement of workability and formability of Mg alloy sheets. In this research, AZ31 Mg alloy sheets were prepared by hot rolling process and the rolling condition dependency of the microstructure and texture evolution was studied by employing a conventional rolling mill as well as an asymmetric rolling mill. When rolled through multiple passes with a small reduction per pass, fine-grained and homogeneous microstructure evolved by repetitive dynamic and static recrystallization. With higher rolling temperature, dynamic recrystallization was initiated in lower reduction. However with increasing reduction per pass, deformation was locallized in band-like regions, which provided favorable nucleation sites f3r dynamic recrystallization. Through post annealing process, the microstructures could be transformed to more equiaxed and homogeneous grain structures. Textures of the rolled sheets were characterized by $\{0002\}$ basal plane textures and retained even after post annealing. On the other hand, asymmetrically rolled and subsequently annealed sheets exhibited unique annealing texture, where $\{0002\}$ orientation was rotated to some extent to the rolling direction and its intensity was reduced.