• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1605-1608
• /
• 2006

The contrast ratio, brightness, and uniformity of S-IPS panel, whose alignment process was employed by ion-beam-alignment (IBA) technology, were improved significantly compared with the convention rubbing's panel, because the light leakage has been reduced in dark state effectively. The IBA technology could generate a panel whose pretilt angle was stable and low after post-treatment process.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.567-570
• /
• 1989

A constant V/F control system of voltage contrlled PWM inverter has a unstable operation of the low- speed and the light-load. In this paper, the authors propose stability control with idealized operation of induction motor by the neglect of primary leakage inductance and resistance. Also ldealized operation system is adopted voltage error, feed back impedance circuit, and increasing resistance from dead time of switching is compensated by the soft ware with u-processors. The proposed simulation of the idealized control method is proved at the low-speed operation for three phase induction motor.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.482-487
• /
• 2001

Leaf type foil bearings have been used successfully in many aerospace applications such as air cycle machines, turbocompressors and turboexpander. These applications are characterized by light loads, constant speeds and low to moderate temperatures. But, as system on start-up or shutdown, sliding contact between the shaft and foil surfaces cause wear. So, in present study, to understand pressure-flow characteristics and deformation of foil bearing, flow/structure interaction analysis was used. and using this method, 2D and 3D calculation was peformed for shape of foil bearing to know circumferential direction flow and leakage flow characteristics of axial direction.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1885-1891
• /
• 2010

Recently metropolitan local governments is actively introducing urban railway's expand and light rail transit as a means of new transport system. DC electricity feeder system operating in the domestic urban railway is typically a feedback circuit consisted of the contact wire and electric railway vehicle via rail. But stray current is to be defined as a current flowing on a structure that is not part of the intended electrical circuit with respect to a given structure. Stray current is generally results from the leakage of return currents from large DC traction systems that are grounded or have a bad earth-insulated return path. At the place where the current leaves the rail and metallic structures, electrolytic corrosion may take place. This paper presents comparison analysis of field test methods based on criteria of electrolytic corrosion protection of buried metallic structures adjacent to DC traction systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.3 s.258
• /
• pp.403-408
• /
• 2007

The concrete pipe(Hume, PC) and polyethylene(PE) pipe are usually used for dram pipe in local market. Hume pipe, however, is heavy and needs the high cost of construction and PC pipe has a disadvantage to easily occur the deformation by the outside pressure even though it is light and constructible. The corrugated steel pipe coated with polyethylene is used increasedly because it is durable, constructible and economical. However, it is not used for sewage or waste water because it is hard to guarantee the watertight property on the coupling part. In this study, we studied on the flange coupling and the method of its construction to guarantee the watertight property and easy to use. If the developed flange coupling and method are used on a construction field, the economical property, constructible property and structural safety can be guaranteed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.322.2-322.2
• /
• 2014

Lighting emitting diodes of n-ZnO/MQW/p-GaN structure are fabricated and investigated. To realize this LED structure, n-ZnO/MQW/p-GaN are grown by MOCVD. At several bias voltages, blue-green light is emitted from the ZnO mesa edge. However, the emission is restricted near the mesa edge. It is seen that the hole current does not spread well. It is because conductivity of p-GaN is extremely small. The break down voltage of the device is small compared to conventional InGaN/GaN LEDs. It is seen that ZnO columnar grain boundaries act as leakage current paths and non-radiative recombination center.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.9
• /
• pp.770-775
• /
• 2000

A new photo-polymer material of the copoly (PM4Ch-ChMA), copoly (poly (4-methacryloyloxy)chalcone-cholesteryl methacrylate) for homeotropic alignment was synthesized and the electro-optical (EO) performance for the photo-aligned vertical-aligned (VA)-LC display (LCD) was studied. Good thermal stabilities of synthesized copolymer were obtained by TGA(Thermogravimetric Analysis) measurement. Good voltage-transmittance (V-T) and response time characteristics for the photo-aligned VA-LCD with polarized UV exposure in oblique direction($\theta$$_{i}$=30$^{\circ}$) on a copolymer-1 (2%) surfaces for 1 min were observed. but, light leakage in the off-state was observed. Therefore, we achieved excellent V-T and response time characteristics for the photo-aligned VA-LCD with UV exposure on a copolymer-3 (30%) surfaces for 3 min.n.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.43-44
• /
• 2000

The fringe-field switching (FFS) display is known to exhibit wide-viewing-angle and high transmittance. We have simulated pretilt effects on electro-optic characteristic of the device when a liquid crystal with positive and negative dielectric anisotropy is used. The results show that asymmetry in contour of luminance and light leakage in the dark state are increased but voltage-dependent transmittance curves remain about the same, as the pretilt angle increases to $10^{\circ}$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.453-456
• /
• 2005

Color characteristics of a dark state in the IPS-mode depending on viewing direction have been studied. IPS-mode is having a little variation of $d{\Delta}n$ with viewing angle since the LC rotates in plane. However, this mode shows asymmetric light leakage and color characteristics with viewing angle in a dark state. This drawback can be overcome by optimized retardation value of TAC film, pre-tilt angle & $d{\Delta}n$ of LC.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.395-398
• /
• 2007

Two new cell structures for optical compensated bend were proposed. There are two groups of slit electrodes, which are driven by two different signals corresponding to the entire electrode as common electrode. The transmittance was enhanced without increasing the response time and light leakage. Compared with the traditional OCB mode, the increment of the transmittance of each kind is about 90% and 30%.