• Journal of the Ergonomics Society of Korea
• /
• v.36 no.4
• /
• pp.325-341
• /
• 2017

Objective: The purpose of this study is to suggest the guidelines of operation phases to minimize injuries and musculoskeletal disorders in manual material handling (MMH) tasks through literature reviews. The guidelines are presented as the preparing phase, lifting phase, carrying phase, and lowering phase. Also, we summarized the non-numerical general guidelines for MMH tasks. Background: Manual material handling is still a main cause to musculoskeletal disorders. Method: Procedures of a literature review are classified into database selection, keyword search, title review, abstract review related to literature selection, guideline review and arrangement. A total 48 papers and books were analyzed in detail by title and abstract reviews. Results: In the preparing phase, we suggested the basic conditions in MMH, preparing procedure, clothing and protective equipment, and education. In the lifting and carrying phases, we recommended maximal acceptable weight by frequency and body posture. In the lowering phase, we suggested the lowest weight and safety body postures. Finally, we recommended general guidelines and guideline items for MMH. General guidelines are presented to suggest worker selection, technical education, and work design parts. Conclusion: We suggested the guidelines on the four operation phases of MMH tasks such as preparing, lifting, carrying, and lowering phases. Application: The findings of this study can be utilized as guidelines for proactive recommendations according to workers in MMH tasks.

• The Journal of Korean Physical Therapy
• /
• v.3 no.1
• /
• pp.123-149
• /
• 1991

This study has been attempted to be helpful for the back rehabilization of Korean workers by analyzing the general, occupational, social aspects of low back pain and to identify possible risk factors for back pain in White and Blue collar workers. The primary data were collected from 380 workers in Seoul city by means of a Questionnaire with random which was distributed from March 10 to 31, 1990. For the test of statistical significance, chi-square analysis was used to compare the back pain characteristics between above two groups. The results were as follows : 1. The incidence of low back pain in all walkers studied was $79.7\%$. The incidence of Blue collar with low back pain $(87.2\%)$ was higher than that of White collars $(75.0\%)$. 2. With regard to the relationship of back pain to the occupational characteristics, statistically significant differences were observed between workers with and without back pain concerning the job factors on work-time, job satisfaction, mental stress, chair fittness, work posture, work rotation, weight lifting, monotonous repetitive movements, vibration, and heavy noise (p<0.05). 3. With regard to the relationship of back pain to the social characteristics, there were no differences with respect to having car, personality types, drinking habits, and leisure-time activities. However, significant differences were showed between no pain and pain groups for the using bed, sleeping posture, traffic time amount, walking health state, smoking habits, and physical exercise (p<0.05). 4. The comparative analysis of back pain related to work factors showed highly significant differences with respect to mental stress, chair fittness, work posture, trunk rotation, weight lifting, monotonous repetitive work in White collar group (p<0.01) ; and job satisfaction, mental stress, trunk rotation, weight lifting, monotonus repetitive work, exposure to vibration and heavy noise in Blue collar group(p<0.01). 5. The comparative analysis of social factors in two groups showed differences with respect to the using bed, sleeping posture, walking amount, health state, physical exercise, smoking habits in White cellar group (p<0.05) ; and walking amount, traffic time amount, health state, smoking habits, physical exercise in Blue cellar group (p<0.05). 6. In regard to the general aspects of back pain between two groups, there were differences concerning etiolgy of back pain, counselling partners, treatment types, and sick-leaves(p<0.05), except pain duration, and awareness of back pain.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.19-26
• /
• 2020

This paper proposes a framework for creating acrobatic scenes such as soccer ball lifting using various users' videos. The proposed method can generate a desired result within a few seconds using a general video of user recorded with a mobile phone. The framework of this paper is largely divided into three parts. The first is to analyze the posture by receiving the user's video. To do this, the user can calculate the pose of the user by analyzing the video using a deep learning technique, and track the movement of a selected body part. The second is to analyze the movement trajectory of the selected body part and calculate the location and time of hitting the object. Finally, the trajectory of the object is generated using the analyzed hitting information. Then, a natural object lifting scenes synchronized with the input user's video can be generated. Physical-based optimization was used to generate a realistic moving object. Using the method of this paper, we can produce various augmented reality applications.

• The Korean Journal of Emergency Medical Services
• /
• v.23 no.1
• /
• pp.101-112
• /
• 2019

Purpose: The purpose of the study was to contribute to the prevention of musculoskeletal disorders (MSDs) in 119 emergency medical technicians (EMTs) by evaluating ergonomic risk factors of patient lifting work-postures. Methods: Four procedures were evaluated: using long back-board (LBB) on the sitting and standing main stretcher, using variable stretcher on the sitting and standing main stretcher. Wok-postures were assessed during training. Results: In using LBB on the sitting main stretcher, the OWAS-score was Mode:3 (Mean:2.30, Maximum:3), the REBA-score was Mode:9 (Mean:7.61, Maximum:11), requiring improvement soon. In using LBB on the standing main stretcher, the OWAS-score was Mode:3 (Mean:2.33, Maximum:3), requiring as soon as possible corrective action, the REBA-score was Mode:6 (Mean:5.44, Maximum:11), requiring improvement. In using variable stretcher on the sitting main stretcher, the OWAS-score was Mode:1 (Mean:1.85, Maximum:3), not requiring corrective action, the REBA-score was Mode:6 (Mean:6.78, Maximum:11), requiring improvement. In using variable stretcher on the standing main stretcher, the OWAS-score was Mode:3 (Mean:2.84, Maximum:3), requiring as soon as possible corrective action, the REBA-score was Mode:11 (Mean:9.38, Maximum:11), requiring immediate improvement. Conclusion: All four-procedures showed improvement in work-posture. Thereby, required attention and management in training, occupational health professionals should participate in change of lifting-method, and programs aimed at preventing MSDs should be developed and implemented in fire-academy and fire-station.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.117-122
• /
• 2022

This paper proposes a method for evaluating the work of manufacturing workers using MediaPipe as a risk factor for musculoskeletal diseases. Recently, musculoskeletal disorders (MSDs) caused by repeated working attitudes in industrial sites have emerged as one of the biggest problems in the industrial health field while increasing public interest. The Korea Occupational Safety and Health Agency presents tools such as NIOSH Lifting Equations (NIOSH), OWAS (Ovako Working-posture Analysis System), Rapid Upper Limb Assessment (RULA), and Rapid Entertainment Assessment (REBA) as ways to quantitatively calculate the risk of musculoskeletal diseases that can occur due to workers' repeated working attitudes. To compensate for these shortcomings, the system proposed in this study obtains the position of the joint by estimating the posture of the worker using the posture estimation learning model of MediaPipe. The position of the joint is calculated using inverse kinetics to obtain an angle and substitute it into the REBA equation to calculate the load level of the working posture. The calculated result was compared to the expert's image-based REBA evaluation result, and if there was a result with a large error, feedback was conducted with the expert again.

• The Research Journal of the Costume Culture
• /
• v.20 no.5
• /
• pp.725-735
• /
• 2012

This study investigated the demand for functional clothing that compensates for the physical deformation of women due to aging. For this, the degree of perception of physical deformation at the new silver generation was examined. The demand for functional clothing that corrects body shape and posture according to differences in age and degree of perception was analyzed. Study participants(n=138) were women who ranged from 55 to 65 in age. Perception of physical deformation was investigated in the categories of deformation of body posture, cognition of joint pain, and deformation of body shape. Analysis results showed that cognition of joint pain was the largest of the three elements of body deformation, and each element had a high correlation between each other. Perception for degree of body deformation for women in their 50's and 60's was similar. These results show that changes in posture or body shape occur severely from the late 50's, and this appears as joint pain. The group with a high perception of posture deformation showed an especially high demand for functional clothing that corrects body shape and posture. The group with a high perception of body shape deformation had high demand for functional clothing that corrects body shape by lifting the hips and the breasts, and making the abdomen and waist slimmer. The results of this study show that women of the new silver generation are attuned to deformations in body shape and posture as well as joint pain beginning in their mid-fifties. There is a need to develop functional clothing to correct posture and body shape for the new silver generation women.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.148-152
• /
• 2005

The purpose of this paper is to investigate risk factors and ergonomically improve the manufacturing lines of compressors for prevention of work-related musculoskeletal disorders, enhancement of productivity, and workers satisfaction We executed questionnaire survey, ergonomic risk factors investigation of manufacturing lines and ergonomic intervention of work methods, workplace and hand tools. The results of the questionnaire showed that $7.9\%$ of respondents were positive in WMSDs symptom survey. In ergonomic evaluation, the analysis methods such as RULA and NIOSH lifting equation were used and 28 processes in the lines were evaluated to be potentially hazardous. We ergonomically improved the processes to reduce potential WMSDs hazards : manual material handling, carts, work tables, transport methods, working posture and hand tools.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.117-120
• /
• 2001

Low back pain has been known as the most frequent musuculoskeletal disorders in modern industrial society and cost by low back pain is increasing mon and more. The asymmetric lifting has been identified as a major risk factor of low back pain. In this study, the muscle activity and muscle exertion level during asymmetric load handling (without trunk flexion) was estimated. The results of normalized MVC measurement were decreased about 16％, 24％, 34％ respectively as the asymmetric angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. From the results of EMG measurement contralateral muscles were more active than ipsilateral muscles. RMSEMG values of right erector spinae muscles were decreased as the work posture went to 90$^{\circ}$ and those of left erector spinae muscles were increased until the asymmetric angle was 40$^{\circ}$ but decreased continually over 40$^{\circ}$. And for seven of subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.3
• /
• pp.29-41
• /
• 2020

PURPOSE: The aim of this study was to provide evidence for the treatment of Forward Head and Rounded Shoulder Posture (FHRSP) using posture correction exercises by comparing muscle activity and onset time around the neck and shoulder area during an arm elevation task. METHODS: The subjects were divided into FHRSP (21 persons) and non-FHRSP (19 persons) groups to measure muscle activity and onset time of muscle contraction. Wireless surface electromyography was used to assess the muscle activity and onset time of the right and left sternocleidomastoid (SCM), splenius capitis, anterior deltoid, middle deltoid, serratus anterior, upper trapezius, pectoralis major, and infraspinatus during an arm elevation task. After the pre-measurement, the participants performed the postural correction exercises, and then the post-measurement was conducted. RESULTS: After the posture correction exercises, there were significant differences in the muscle activity and onset time of all muscles in the FHRSP group. The results of the comparison of the muscle onset time during an arm elevation task demonstrated that after the postural correction exercises, the muscle onset time was significantly reduced in the right and left SCM and left splenius capitis, but there were no significant changes in the onset time of other muscles. CONCLUSION: The results of this study help us understand the change in muscle activities and muscle contraction onset time in a person with FHRSP when lifting the arm and suggest the relevant basis to apply the posture correction exercise in clinical settings.

• Journal of the Korean Society of Safety
• /
• v.26 no.3
• /
• pp.69-74
• /
• 2011

Despite most of tasks in manufacturing, construction and agriculture, etc., were currently mechanized and automated, manual materials handling still existed in atypical working condition. In case of manual materials handling, repetitive work, inappropriate working posture, excessive force, contact stress might cause overload, which could lead to work-related musculoskeletal disorders and low back pains. On this basis, the goal of this study is to reveal the effects of various lifting postures of trunk angles and lower extremity postures on maximum holding time(MHT). Twenty two subjects were recruited from a university population. The experiment was designed by a combination of three trunk angle ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) and three lower extremity postures(straight, bent, kneeling). Before experimental trials, subjects performed MVC(maximum voluntary contraction) exertions in three trunk angles ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) to calculate 30%MVC at designated postures. In each trial, they were required to hold the handheld load(30%MVC) for a designated posture as long as they could. The results of MVC by trunk angles were measured in $0^{\circ}$ > $20^{\circ}$ > $60^{\circ}$ orders, but those of MHT measured in $20^{\circ}$ > $0^{\circ}$ > $60^{\circ}$ orders. These results showed that straight posture is the ideal working posture in work exerted a strong force for a short time, but the ability to work might be improved in the trunk angle $20^{\circ}$ in work required 30%MVC for a long time. Also, results of MVC and MHT by lower extremity postures measured in straight > bent > kneeling orders.