• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.1
• /
• pp.61-73
• /
• 2021

PAV is considered to improve quality of life and standards of living, improvement of which was caused by automobile hundred years ago. Comparative economic efficiency of PAVs is measured to compare each PAV. Specification and sales price of the PAVs are open to the public. BlackFly, Transition and Aeromobil 3.0 have competitive power in flying range, purchasing cost, and operational cost. Lift & cruise configuration and vectored thrust configuration PAVs are designed by many companies nowadays, and BlackFly which can be considered to be lift & cruise configuration is one of the most efficient PAVs. High battery price does not help multi-copter shaped PAVs to have economic efficiency. Aerodynamic wing, eVTOL, and low sale price are needed for PAVs to ride a wave of public interest as a new personal mobility. Under the conditions, the PAV can fly at downtown and can be purchased by people at large. Popularization of PAV could follow in the 100 years old footsteps of automobile.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.403-413
• /
• 2017

Dual-point aerodynamic design optimization is conducted for DLR-F6 wing-body-nacelle-pylon configuration adopting an efficient surface mesh movement method for complex junction geometries. A three-dimensional unstructured Euler solver and its discrete adjoint code are utilized for flow and sensitivity analysis, respectively. Considered design conditions are a low-lift condition and a cruise condition in a transonic regime. Design objective is to minimize drag and reduce shock strength at both flow conditions. Shape deformation is made by variation of the section shapes of inboard wing and pylon, nacelle vertical location and nacelle pitch angle. Hicks-Henne shape functions are employed for deformation of the section shapes of wing and pylon. By the design optimization, drag coefficients were remarkably reduced at both design conditions retaining specified lift coefficient and satisfying other constraints. Two-point design results show mixed features of the one-point design results at low-lift condition and cruise conditions.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.175-182
• /
• 2011

Optimized design was performed for a subsonic aircraft wing. The subsonic aircraft is dual turbo-prop and carrying less than 100 passengers. The cruise speed is Mach 0.6. The design was performed by two stages. The first stage is to decide the height of horizontal tail by analyzing the directional stability with Vorstab and then, the optimized wing configuration was selected with Piano, a optimizer commercially available. Fluent, a commercial CFD software was utilized to predict the aerodynamic performance of the aircraft. Drag of the aircraft was minimized with maintaining constant lift for cruise. The optimization reduced 10 counts from the initial wing configuration.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.2
• /
• pp.1-6
• /
• 2022

Recently, the development of UAM, which was named by NASA as an alternative to solve the traffic and environmental problems caused by the rapidly progressing urbanization. When designing UAM, the location of lift fans greatly affects the core technology of the eVTOL type, distributed electric propulsion technology and aerodynamic performance of the vehicle. In this paper, a hybrid UAM model was designed using OpenVSP, an open source aircraft configuration modeling program, and aerodynamic analysis was performed according to the lift fans position change by the vortex lattice method. As a result, it is confirmed that the flight parameters and trailing wakes are stable by fixing the lift fan with the state rotated 0° to the flow direction of the aircraft during cruise flight. Also, OpenVSP is a suitable tool to be used in aircraft configuration modeling and design.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.521-523
• /
• 2004

The Japan Aerospace Exploration Agency (JAXA) has proposed new vertical take-off and landing (VTOL) aircraft known as the Jet-VTOL aircraft shown in Fig.1. The Jet-VTOL aircraft is based on a canard wing configuration. The aircraft has the clustered lift-fans mounted near the center of gravity for vertical flight, and has the clustered fans mounted beside the vertical tail for cruise flight. Both fans are driven by the core engine mounted inside the aft end of fuselage. The propulsion system is innovative and attractive not to be seen even in the world.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.3
• /
• pp.229-236
• /
• 2013

This paper presents the experimental investigation of a biplane micro air vehicle. The effects of geometric parameters, gap, stagger, and decalage angle are investigated at low Reynolds number (~150,000) in a low-speed wind tunnel. A rigid flat plate with an aspect ratio of one and square planform shape is used to evaluate all three geometric parameters. The side dimension of the single flat plate is 0.15 m. The goal is to find an optimal biplane configuration that should exceed monoplane performance by generating high lift and flying as slow as possible, in order to capture high-quality visual recordings. This configuration will directly help to fly at a lower velocity and to make tighter turns that are advantageous in restricted environments. The results show that the aerodynamic performance of the biplane MAV is significantly enhanced through the combination of gap and stagger effects. A performance comparison demonstrates the superiority of the optimal biplane configuration compared to a monoplane in cruise and glide phases. Moreover, no significant compromise is found for the range, endurance, and climb performance.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.8 no.1
• /
• pp.83-95
• /
• 2000

Lift, drag, pitching moment, what we call longitudinal aerodynamic coefficient, effects airplanes directly, so the method to find the accurate result quickly is an important factor from the beginning of the aircraft design. There are different ways to find aerodynamic coefficient such as empirical methods, numerical analysis methods, wind tunnel tests, and finally through an actual flight tests, but choosing the best methods depends on the due date or the cost. The accuracy varies on each design level, but all this methods have relationship to complement and balance each other, so by combining proper methods, the best result can be obtained. At this paper, empirical methods and numerical analysis method were experimented, compared, and reviewed to find the availability of each method and by combining two methods accurate result was obtained. So, we applied this methods to predict the aerodynamic coefficient on cruise configuration aircraft, and was able to obtain more accurate result on the low speed longitudinal aerodynamic coefficient. Also by watching there result, we are able to predict the errors before the actual wind tunnel test.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.65-72
• /
• 2012

Numerical simulations were performed to study the stall characteristics of turboprop aircraft. Stall characteristics were qualitatively investigated using the computational results of various configurations based on the combinations of propeller and high lift device. For the analysis of stall characteristics, three-dimensional Navier-Stokes solver with Spalart-Allmaras turbulence model was used and the relative motion between propeller and wing was simulated using sliding mesh technique. For the cruise configurations, major flow separation was occurred at the fuselage/wing fairing and the separation was reduced under propeller slipstream condition. For the high lift device configuration without propeller, major flow separation was occurred at the outboard side of nacelle. With rotating propeller, early stall onset due to low relative velocity and high effective angle of attack was observed on the outboard wing section. Regarding rotating direction of propeller, inboard-down direction was preferred due to the stall delay effect of propeller slipstream.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.17-28
• /
• 2021

Recently, eVTOL, the next-generation of eco-friendly transportation, has been in the spotlight due to global warming along with traffic jams in large cities of many countries. This study benchmark the external features of Hyundai Motors S-A1, a compound eVTOL combined fixed and tilt rotors among many types of eVTOLs, to create the basic configuration using reverse design techniques. Basic configurations were created using CATIA and aerodynamic analyses were performed using the aircraft design and aerodynamic analysis programs, OpenVSP, XFLR5, and the aircraft wetted area, drag, and lift were calculated after selecting the airfoil, incidence angle, and dihedral and anhedral angles through trade study. Also, required powers were estimated for completing the given mission profile and components weight and the total weight were predicted using the estimation formula and data survey.