• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.372-379
• /
• 2017

Software reliability factor during the software development process is elementary. Case of the infinite failure NHPP for identifying software failure, the occurrence rates per fault (hazard function) have the characteristic point that is constant, increases and decreases. In this paper, we propose a reliability model using the chi - square distribution which depends on the degree of freedom that represents the application efficiency of software reliability. Algorithm to estimate the parameters used to the maximum likelihood estimator and bisection method, a model selection based on the mean square error (MSE) and coefficient of determination($R^2$), for the sake of the efficient model, were employed. For the reliability model using the proposed degree of freedom of the chi - square distribution, the failure analysis using the actual failure interval data was applied. Fault data analysis is compared with the intensity function using the degree of freedom of the chi - square distribution. For the insurance about the reliability of a data, the Laplace trend test was employed. In this study, the chi-square distribution model depends on the degree of freedom, is also efficient about reliability because have the coefficient of determination is 90% or more, in the ground of the basic model, can used as a applied model. From this paper, the software development designer must be applied life distribution by the applied basic knowledge of the software to confirm failure modes which may be applied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.656-665
• /
• 2016

Objectives: This study examined the characteristics and related factors by comparing the lifestyles and health behaviors between Korean Seventh-day Adventists and the general population of Korea. Methods: A survey was conducted of 878 people more than 20-years-old Korean Seventh-day Adventists who live in the metropolitan area and 3,000 people more than 20-years-old who live in the metropolitan area in 4th (2nd year) National Health and Nutrition Survey. A comparison of health behaviors related to health screenings, smoking, drinking, physical activity, subjective stress, weight management, and oral health was analyzed using a chi-square test. Logistic regression analysis was used to identify the contributing factor to the health behavior. Results: Health screening rates among Korean Seventh-day Adventists were higher than the general population (p<0.001), but Korean Seventh-day Adventists showed lower rates of health screening in the 20-30 ages. Lifetime smoking experience rates and current smoking rates were significantly lower in the Korean Seventh-day Adventists than in the general population (p<0.001). The success rate of smoking cessation among ex-smokers of Korean Seventh-day Adventists were very high. In terms of the drinking rate, Korean Seventh-day Adventists were significantly lower than the general population (p<0.001). The drinking rate of men was higher than women (p<0.001). Moderate physical activity of men were higher than women in Korean Seventh-day Adventists (p<0.001). Conclusion: The lifestyles and health behaviors of Korean Seventh-day Adventists, such as tobacco smoking and alcoholic drinking, were eminently healthier than the general population. Nevertheless, further well-organized studies will be needed.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.6
• /
• pp.97-109
• /
• 2017

Purpose - This study aimed to investigate the effect of entrepreneurial temperament (ET) such as innovativeness, risk-taking, and proactiveness in entrepreneur's lifetime before start-up and the effect of social capital (SC) such as network ties and trustworthiness on entrepreneurial intention. Research design, data, and methodology - We examined the components of ET (innovativeness, risk-taking, and proactiveness) and components of SC (network ties and trustworthiness) through existing prior research and investigated the factors that affected entrepreneurial intention. The first hypothesis of this study was that entrepreneurial temperament will have a significant impact on network ties of social capital, and the second hypothesis assumed that entrepreneurial temperament will have a significant effect on the trustworthiness of social capital. Finally, the second hypothesis assumed that social capital will have a significant impact on entrepreneurial intentions. We collected 175 data using questionnaires for people who have not yet started a start-up. And we used the Structure Equation Modeling (SEM) to evaluate the collected data and to test the research model by the two step research procedure. Results - As a result, the innovativeness and proactiveness of ET have a significant effect on network ties and trustworthiness of SC, but the effect of risk-taking on risk-taking of SC is not significant. On the other hand, network ties and network ties of SC was revealed a significant effect on the EI. Conclusions - The implications of this article could be observed as mentioned in this paper. First, we found that entrepreneurial innovativeness and proactiveness are helpful in constructing SCs, but not risk-taking. These results demonstrated that ET of entrepreneurs is important factor in the formation of social capital. Second, the SC that an entrepreneur built before the start-up has a meaning for EI. In conclusion, ET was affected partially to EI mediated SC. It is academic in that ET and SC are independent from each other and have a mediating role between ET and EI, unlike those directly affecting EI. Although some important implications were found in this study, this study had some limitations and we hope that future research will be complemented.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.21
• /
• pp.9453-9458
• /
• 2014

Background: Breast cancer is the second leading cause of cancer death for women in the United States. Differences in survival of breast cancer have been noted among racial and ethnic groups, but the reasons for these disparities remain unclear. This study presents the characteristics and the survival curve of two racial and ethnic groups and evaluates the effects of race on survival times by measuring the lifetime data-based half-normal model. Materials and Methods: The distributions among racial and ethnic groups are compared using female breast cancer patients from nine states in the country all taken from the National Cancer Institute's Surveillance, Epidemiology, and End Results cancer registry. The main end points observed are: age at diagnosis, survival time in months, and marital status. The right skewed half-normal statistical probability model is used to show the differences in the survival times between black Hispanic (BH) and black non-Hispanic (BNH) female breast cancer patients. The Kaplan-Meier and Cox proportional hazard ratio are used to estimate and compare the relative risk of death in two minority groups, BH and BNH. Results: A probability random sample method was used to select representative samples from BNH and BH female breast cancer patients, who were diagnosed during the years of 1973-2009 in the United States. The sample contained 1,000 BNH and 298 BH female breast cancer patients. The median age at diagnosis was 57.75 years among BNH and 54.11 years among BH. The results of the half-normal model showed that the survival times formed positive skewed models with higher variability in BNH compared with BH. The Kaplan-Meir estimate was used to plot the survival curves for cancer patients; this test was positively skewed. The Kaplan-Meier and Cox proportional hazard ratio for survival analysis showed that BNH had a significantly longer survival time as compared to BH which is consistent with the results of the half-normal model. Conclusions: The findings with the proposed model strategy will assist in the healthcare field to measure future outcomes for BH and BNH, given their past history and conditions. These findings may provide an enhanced and improved outlook for the diagnosis and treatment of breast cancer patients in the United States.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.11
• /
• pp.4699-4704
• /
• 2015

Medical diagnostic X-ray workers are one occupational group that expose to the long-term low-dose external radiation over their working lifetime, and they may under risk of different cancers. This study aims to determine the relationship between the occupational X-ray radiation exposure and cancer risk among these workers in Jiangsu, China. We conducted Nested case-control study to investigate the occupational X-ray radiation exposure and cancer risk. Data were collected through self-administered questionnaire, which includes but not limits to demographic data, personal behaviors and family history of cancer. Retrospective dose reconstruction was conducted to estimate the cumulative doses of the x-ray workers. Inferential statistics, t-test and 2 tests were used to compare the differences between each group. We used the logistic regression model to calculate the odds ratio (OR) and 95% confidence interval (CI) of cancer by adjusting the age, gender. All 34 breast cancer cases and 45 esophageal cancer cases that detected in a cohort conducted among health workers between 1950~2011 were included in this presented study, and 158 cancer-free controls were selected by frequency-matched (1:2). Our study found that the occupational radiation exposure was associated with a significantly increased cancer risk compared with the control, especially in breast cancer and esophageal cancer (adjusted OR=2.90, 95% CI: 1.19-7.04 for breast cancer; OR=4.19, 95% CI: 1.87-9.38 for esophageal cancer, and OR=3.43, 95% CI: 1.92-6.12 for total cancer, respectively). The occupational X-ray radiation exposure was associated with increasing cancer risk, which indicates that proper intervention and prevention strategies may be needed in order to bring down the occupational cancer risk.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.7-15
• /
• 2006

In-situ observation of electromigration in thin film pattern of 63Sn-37Pb solder was performed using a scanning electron microscope system. The 63Sn-37Pb solder had the incubation stage of electromigration for edge movement when the current density of $6.0{\times}10^{4}A/cm^2$ was applied the temperature between $90^{\circ}C\;and\;110^{\circ}C$. The major diffusion elements due to electromigration were Pb and Sn at temperatures of $90-110^{\circ}C\;and\;25-50^{\circ}C$, respectively, while no major diffusion of any element due to electromigration was detected when the test temperature was $70^{\circ}C$. The reason was that both the elements of Sn and Pb were migrated simultaneously under such a stress condition. The existence of the incubation stage was observed due to Pb migration before Sn migration at $90-110^{\circ}C$. Electromigration behavior of 63Sn-37Pb solder had an incubation time in common for edge drift and void nucleation, which seemed to be related the lifetime of flip chip solder bump. Diffusivity with $Z^*$(effective charges number) of Pb and Sn were strongly affect the electromigration-induced major diffusion element in SnPb solder by temperature, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.754-759
• /
• 2015

Nowadays, short distance communication systems with low power energy (LPE) are developed for identification and monitoring of site identification of vessel crews and passengers (SIVCP). LPE communication modules, such as Bluetooth low energy (BLE) and Zigbee, are used for short distance communications with LPE. These modules enable 1:N communications and their popularity is growing since the modules can be mounted on movable objects, such as mobile devices and human body. When these modules are used, the important factor that affects their operation time and design are the capacity and size of battery. Therefore, they must be made as small as possible, and the battery should be selected to be slightly smaller than the module. In this study, we calculate the theoretical life of batteries used in SIVCP BLE modules using data sheet and discharge characteristic graph under the condition of a 1/250 transmission-ratio (TR). We thus calculate experimental life by measuring transmission current for the same TR, and low speed mode current for a 1/5000 TR and measure long-term experimental life using 1/25 TR for days. Through these experiments, we verify experimental methods for the prediction and extension of battery life that would enable us to select appropriate sizes of batteries based on vessel usage and passenger types. The selections of the module TR and battery size are important factors affecting the cost reduction of module design, the battery maintenance, and passenger convenience.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.535-545
• /
• 2019

The PBA of ship weapon system should be installed and operated under harsh environmental conditions and so it should be highly reliable to endure the mission profiles during its entire lifetime. In the case of PBA failure during operation, rapid maintenance is highly likely to be difficult due to problems such as supply of parts, which can have a devastating effect on the mission. In order to validate the reliability of PBA, a series of tests are performed with PBA samples, but they require time, testing facilities, samples, expenses and failure analysis if failed. The reliability of PBA is predicted on the basis of specifications such as MIL-HDBK-217F, but this specification does not take into account failure mechanisms for specific design details, environment and usage, interconnects and its characteristics that drive many failures of PBA in the field. Therefore, this study predicts the reliability of PBA using an RPA tool and proposes the RPA methodology as a validation process at the design stage. With RPA, it is now possible to achieve design validation including inherent failure mechanism, identification of weakest link, alternative design options, and test plan development.

• Journal of Labour Economics
• /
• v.24 no.2
• /
• pp.63-94
• /
• 2001

Based on the human capital theory, the wage differentials among laborers are generated from the discrepancy of human capital stock which depends on individual laborer's decision. Hence, the wage differentials among laborers or between male and female are not the results of discrimination, but the results of individual choice. But, if the individual choice for human capital stock would be affected by the male-female discrimination, the explanation for male-female wage differentials base on the human capital stock has a bias. Actually, women have experienced in the discrimination on labor market participation due to gravity, parturition, infant rearing. Also, it is a fact that women have been discriminated against men in labor market owing to social, traditional, and cultural discriminations. If woman or her parent will less invest on human capital than man owing to the existence of discrimination in labor market, the 'expected human capital stock' instead of human capital stock will explain male-female wage differentials better. Therefore, in this study, we set up three models; first model includes working hours, industry, occupation, etc which are in general used as explanatory variables for wage decision, second model includes the variables which reflect the traditional human capital stock together with the first model's explanatory variables, third model employes the 'expected human capital stock' instead of traditional human capital stock. From the empirical test, the estimates of discrimination in three models are .93, .60, and, .48 respectively. This result implies that the male-female wage differentials in Korea can be explained by the discrepancy of 'expected human capital stock'. Since the discrepancy in expected human capital stock depend on the disparity in life-cycle labor force participation, male-female wage differentials can largely be attributed to male-female disparity in expected lifetime labor force participation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.421-422
• /
• 2011

The first part is about development of a liquid target for a neutron source, which is designed to overcome many of the limitations of traditional beam-target neutron generators by utilizing a liquid target neutron source. One of the most critical aspects of the beam-target neutron generator is the target integrity under the beam exposure. A liquid target can be a good solution to overcome damage to the target such as target erosion and depletion of hydrogen isotopes in the active layer, especially for the one operating at high neutron fluxes with no need for water cooling. There is no inherent target lifetime for the liquid target neutron generator when used with continuous refreshment of the target surface exposed to the energetic beam. In this work, liquid target containing hydrogen has been developed and tested in vacuum environment. Potentially, liquid targets could allow a point neutron source whose spatial extension is on the order of 1 to $10{\mu}m$. And the second is about the vacuum ultraviolet (VUV) spectrometer which is designed as a five-channel spectral system for ITER main plasma measurement. To develop and verify the design, a two-channel prototype system was fabricated with No. 3 (14.4 nm~31.8 nm) and No. 4 (29.0 nm~60.0 nm) among the five channels. For test of the prototype system, a hollow cathode lamp is used as a light source. The system is composed of a collimating mirror to collect the light from source to slit, and two holographic diffraction gratings with toroidal geometry to diffract and also to collimate the light from the common slit to detectors. The two gratings are positioned at different optical distances and heights as designed. To study the appropriate detector for ITER VUV system, two different electronic detectors of the back-illuminated charge coupled device and the micro-channel plate electron multiplier were installed and the performance has been investigated and compared in the same experimental conditions. The overall system performance was verified by measuring the spectrums.