This study set out to devise an optimized system to take into account life cycle cost(LCC) and ton of carbon dioxide($TCO_2$) by applying the weighted coefficient method(WCM) to "public-purpose" facility buildings according to the mandatory 5% and 11% of new renewable energy in total construction costs and anticipated energy consumption, respectively, based on the changes of the public obligation system. (1) System installation capacity is applied within the same new renewable energy facility investment according to the mandatory 5% of new renewable energy in total construction costs. Both LCC and $TCO_2$ recorded in the descending order of geothermal, solar, and photovoltaic energy. The geothermal energy systems tended to exhibit an excellent performance with the increasing installation capacity percentage. (2) Optimal systems include the geothermal energy(100%) system in the category of single systems, the solar energy(12%)+geothermal energy(88%) system in the category of 2-combined systems, and the photovoltaic energy(12%)+solar energy(12%)+geothermal energy(76%) system and the photovoltaic energy(12%)+solar energy(25%)+geothermal energy(63%) system in the category of 3-combined systems. (3) LCC was the highest in the descending order of photovoltaic, geothermal and solar energy due to the influences of each energy source's correction coefficient according to the mandatory 11% of new renewable energy in anticipated energy consumption. The greater installation capacity percentage photovoltaic energy had, the more excellent tendency was observed. $TCO_2$ recorded in the descending order of geothermal, photovoltaic and solar energy with the decreasing installation capacity of photovoltaic energy. The greater installation capacity percentage a geothermal energy system had, the more excellent tendency it demonstrated. (4) Optimal systems include the geothermal energy(100%) system in the category of single systems, the photovoltaic energy(62%)+geothermal energy(38%) system in the category of 2-combined systems, and the photovoltaic energy(50%)+solar energy(12%)+geothermal energy(38%) system and the photovoltaic energy(12%)+solar energy(12%)+geothermal energy(76%) system in the category of 3-combined systems.
2005년부터 사회기반(SOC)시설에 대한 높은 수준의 공공서비스 제공과 필요시설 조기 확충의 일환으로 미국 등의 PFI(Private Finance Initiative)사업을 벤치마킹한 BTL(Built-Transfer-Lease) 민간투자사업이 국내에 도입되면서, 사업초기 재정투자사업 대비 민간투자사업에 대한 적격성 조사(VFM : Value for Money)의 필요성이 부각되었다. 이에 BTL 사업현황을 분석하고 실무자 입장에서 바라본 사업추진단계별 경제성 분석 방식(VFM분석, 추정사업비 산출, 입찰가격평가 등)의 적정성, 개선필요성 및 대안을 분석해보고자 설문조사를 실시하였다. 실무자 직군별, BTL사업 추진단계별, 개선대안별 교차분석과 상관관계분석 등을 수행한 결과, 사업비용 대비 표준화된 서비스 수준과 운영비 산출 및 평가 기준이 마련되어야 하며, 투자 적격성 조사의 정량적 분석(LCC분석)에 대한 필요성을 토대로 운영관리비, 유지관리비 산출 근거도 마련되어야 한다. 또한 업무의 효율화를 위하여 국내 BTL환경을 고려한 신뢰성 있는 경제성 평가 시스템이 구축되어야 하겠다.
20세기 후반 이후 영상, 음성, 부호, 문자 등의 디지털 데이터에 IT 기술을 융합 적용하여 디지털포맷으로 상품화된 미디어 콘텐츠의 시장가치를 높이려는 많은 노력이 있어 왔다. 그렇다면 미디어에서 언급하는 드라마 '태양의 후예' 혹은 애니메이션 영화 '겨울왕국'에 대한 시장가치는 어떠한 기준과 방법론으로 산출할 수 있을까? 현재까지 미디어 콘텐츠 가치평가 프레임워크나 시스템 개발 등에 대한 연구가 전무한 실정에서, 본 논문에서는 영화, 온라인게임, 방송광고, 애니메이션 등 4가지 미디어 유형에 대한 콘텐츠 가치평가 프레임워크를 정형화하고 제시함으로써, 향후 콘텐츠 이전거래, 투자적정성 검토 등 다양한 목적을 위한 실용적인 가치평가모형을 제안하고자 한다. 따라서, 여기서는 미디어 콘텐츠 유형별로 제작(개발)비용을 포함한 현금흐름(cash flow: C.F.)의 산출방안을 제시하고, 이와 연관된 기타 가치평가 핵심변수요인(경제적 수명, 할인율, 콘텐츠 기여도 및 로열티율)에 관한 참조정보 D/B를 제시하여, 기존 무형자산 평가시에 적용되었던 수익접근법 및 로열티공제법 방식의 가치평가 개념을 활용한 미디어 콘텐츠 가치평가 프레임워크를 개발하고 제안한다.
정비도는 정비를 쉽고 신속하게 할 수 있는 정도를 나타내는 시스템의 주요 설계 특성이다. 정비도를 고려한 시스템 설계는 무기시스템의 운용유지 비용을 줄여 주는 중요한 역할을 수행하지만, 시제품 제작 이후 정비도 평가를 통해 설계변경이 이루어지면 비용증가와 일정지연을 초래할 수 있다. 정량적 정비도 평가는 정비업무 수행 가능여부를 검증하고, 설계자가 시스템의 특성을 고려한 빠른 의사결정을 수행하여 정비성 향상을 위한 설계를 수행할 수 있도록 지원해야 한다. 기존 논문에서는 시스템설계 초기에 그래프 이론을 활용하여 정비도 지수를 산출하였으나 정비속성간 관계 값의 적절성 및 정비도 평가의 정확도에 한계가 있다. 퍼지 로직과 3D 모델링을 활용한 정비도 평가방법의 경우에는 시스템 전수명주기 동안에서의 정비도 평가를 수행하고 결과의 활용을 통해 설계통합 환경 하에서 설계개선을 신속하게 진행하고 효율적으로 정비도를 평가하고 관리하는 방법이 필요하다. 이에 본 논문에서는 모델기반 시스템공학 도구와 MATLAB이 결합된 통합환경 하에서 SysML 기반 모델링 및 시뮬레이션 기법과 퍼지 로직을 활용하여 정비도를 평가할 수 있는 방법을 제시하였다. 시스템공학도구 상에서 SysML bdd 다이어그램을 통해 무기시스템의 물리적 설계구조를 모델링하고 정비속성과 정비속성간 쌍대비교 행렬을 생성하여 정비도를 모델링하였다. 그리고 SysML의 par 다이어그램을 생성하고 MATLAB과의 연동을 통해 AHP 기반의 정비속성별 가중치 연산 및 퍼지 로직을 활용하여 정비도를 산출하였다. 본 연구결과의 활용을 통해, 일관성 있고 진화적인 정비도 모델을 효율적으로 관리할 수 있고, 시스템의 정비도 설계 상태를 정량적으로 분석할 수 있으며 정비도가 낮은 품목을 조기에 식별하여 빠른 의사결정과 설계 개선을 달성할 수 있다.
원자력발전소 운영 과정에서 발생되는 폐기물인 폐수지를 원천적으로 저감하기 위해, 새로운 폐수 정화기술을 개발하고 원전 폐수처리시스템에 가상적으로 적용하여 효용성을 평가하고자 하였다. 본 기술의 기본 원리는 폐수에 존재하는 주요 핵종이온들을 생물학적 혹은 화학적 방법을 통해 무기 결정광물로 바꾸는 방식이다. 실험실에서 폐수를 대상으로 회분식실험을 통해 핵종 제거율을 측정한 결과, 생물학적 방법은 24시간 이내에 세슘을 80% 이상 제거하였고, 화학적 방법은 95% 이상 세슘을 선택적으로 제거할 수 있었다. 그리고 원전 폐수에 존재하는 다른 주요 핵종들(Co, Ni, Fe, Cr, Mn, Eu)에 대해서도 초기 99% 이상의 높은 제거율을 보여 주었다. 우리는 APR1400 원자력발전소의 폐수처리시스템 공정에서 역삼투압(R/O)과 유기 이온교환수지 모듈 사이에 가상으로 본 기술 모듈을 설치하였다. 가상의 모듈 설치를 통한 기술적 타당성 평가를 통해, 우리는 폐수의 주요 핵종들이 90% 이상 선택적으로 제거되고 폐수지의 발생량이 대폭 감소된다는 결과를 얻을 수 있었다. 이러한 결과가 의미하는 바는 본 기술이 향후 미래에 상용화되었을 경우, 폐수지 관리 비용을 크게 감소시키고 수지 수명도 대폭 연장시킬 수 있어, 결과적으로 월성 방사성폐기물 처분시설의 저장고 포화시점을 최대한 늦출 수 있는 이점이 있다.
전기자동차의 주행거리는 리튬이온전지의 에너지 밀도에 의해 결정된다. 리튬이온전지의 에너지 밀도 향상을 위해서는 단위 질량 당 많은 양의 리튬 이온을 저장할 수 있는 고용량 활물질 소재 개발이 필수적이다. 양극 기술의 급속한 발전은 이론적으로 구현 가능한 최대 용량에 근접한 수준의 가역 용량을 활용할 수 있는 수준에 이르렀다. 반면 음극은 90년대에 도입된 흑연을 현재까지도 주요 활물질로 활용하는데 머무르고 있다. 음극의 용량을 증가시키는 방법으로 고용량-장수명 특성을 지닌 실리콘 산화물 활물질을 음극에 첨가하는 방식이 가장 유력하게 검토되고 있다. 그러나 실리콘 산화물의 낮은 초기 쿨롱 효율은 음극 내 실리콘 산화물의 함량을 15% 이내로 제한하여 음극 용량 증가에 걸림돌이 되고 있다. 이에 따라 실리콘 산화물 등 고용량 음극의 초기 효율을 개선할 수 있는 사전리튬화 기술이 점점 많은 주목을 받고 있다. 본 리뷰논문에서는 사전리튬화 기술의 개념 및 효과에 대해 설명하고 현재까지 개발된 사전리튬화 기술을 반응 방식에 따라 분류하여 소개한다. 특히, 리튬화 반응의 균질성이 높고 대량 양산에 강점을 지닌 용액 기반 화학적 사전리튬화 기술의 최신 개발 동향을 집중적으로 소개하였다. 상용화가 가능한 사전리튬화 기술 개발이 가까운 미래의 차세대 리튬이온전지 음극재 시장의 주도권 확보의 핵심 조건이 될 것으로 기대한다.
최근 ICT와 함께 IoT, 클라우드, 인공지능 등의 신기술들이 정보화 사회를 폭발적으로 변화 시키고 있다. 그러나 APT(Advanced Persistent Threat), 악성 코드, 랜섬웨어 등 최신 위협과 개인정보 처리 위탁 업무 확대로 수탁사 관련 개인정보 유출 사고도 더욱 더 증가하고 있다. 따라서 수탁사 보안 강화를 위해 본 연구는 위수탁 개요 및 특징, 보안 표준 관리 체계, 선행 연구들을 현황 분석하여 점검 항목을 도출하였다. 그리고 수탁관련 정보통신망법, 개인정보보호법 등의 법률들을 분석 매핑한 후 최종 수탁사 개인정보 보호 관리 수준 점검 항목들을 도출하고 이를 토대로 AHP 모형에 적용하여, 점검 항목간 상대적 중요도를 확인하였다. 실증 분석 결과 내부관리체계 수립, 개인정보 암호화, 생명주기, 접근 권한 관리 등의 순으로 중요도 우선 순위가 나타났다. 본 연구의 의의는 수탁사 개인정보 취급시 요구되는 점검 항목을 도출하고 연구 모형을 실증함으로써 고객 정보 유출 위험 감소 및 수탁사의 개인정보 보호 관리 수준을 향상시킬 수 있으며, 점검 항목의 상대적 중요도를 고려하여 점검 활동을 수행한다면 투입 시간 및 비용에 대한 효과성을 높일 수 있을 것이다.
최근 4차 산업혁명 기술의 발전에 힘입어 교통시스템은 차량 및 사람의 개별 이동궤적과 관련된 모빌리티 데이터를 대용량으로 산출하고 있다. 개인정보가 포함된 모빌리티 데이터를 활용하는 데에는 많은 제약이 존재하므로, 우리나라는 데이터 3법 개정과 데이터 기본법 제정을 통해 가명정보의 생성 및 가공과 이에 대한 분석 및 활용을 별도의 기관 및 기술을 적용하여 이원적으로 관리하고 있다. 그러나 이러한 이원적 접근은 데이터 생명주기 전 과정을 안전하게 지원하지 못할 뿐만 아니라 처리 시간 및 비용 측면의 비효율성의 문제를 갖고 있다. 따라서 본 연구는, 기존의 결합전문기관과 데이터안심구역이 갖는 문제점을 보완하기 위하여, 모빌리티 데이터의 생성 및 가공, 그리고 분석 및 활용 과정을 통합 및 일원화한 통합 데이터안심구역 프레임워크를 제시한다. 즉, 데이터 처리를 위한 통합 프로세스를 재설계하고 공통 요구사항 및 핵심요소기술을 도출하여 모빌리티 데이터의 생명주기 전체를 원스톱으로 활용, 관리할 수 있는 차세대형 통합 데이터안심구역 시스템의 아키텍처를 제시한다.
The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.
국내에서는 일부 대기업을 제외하고는 공급사슬 관리(SCM) 체제 구축에 매우 소극적이며, 중소기업들은 SCM관리의 개념조차 인식하고 있는 경우가 대 다수이다. 이는 공급망 비효율적 관리로 인한 국내 제조업체, 협력업체, 유통업체 및 물류업체들 재고관리 비용, 수요관리 비용 등 비 효율화를 초래하고 있으며, 나아가 국내 기업의 경쟁력 저하에도 큰 영향력을 미치고 있다. 그 이유는 공급사슬 관리(SCM) 태생적인 특징인 공급사슬 관리(SCM) 전체에 대한 정보 공유 및 프로세스 혁신과, 공급사슬 관리(SCM)가 갖는 광범위함 때문이라고도 할 수 가 있다. 이 논문은 성공적인 공급사슬 관리(SCM) 추진을 위한 공급사슬 관리(SCM) 관련 이론적 논의와 구축전략과 도입 및 성공사례를 연구 및 분석을 통하여 현상황에 대한 고찰과 개선방안에 대해서 제안해보고자 한다. 성공적인 공급사슬 관리(SCM) 추진을 위한 방안을 논의하기 위해서는 먼저 공급사슬 관리(SCM)에 대한 이론적 배경에 대한 고찰이 필요하다. 따라서 II장에서는 공급사슬 관리(SCM)에 대한 기본적인 개념과 필요성에 대해서 기술하고, III장에서는 현재 추진되고 있는 공급사슬 관리(SCM)에 대한 문제점에 대해서 기술할 것이다. 마지막으로IV, V장에서는 공급사슬 관리(SCM) 구축전략과 LG전자사례 및 결론을 기술할 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.