• 한국육종학회지
• /
• 제42권4호
• /
• pp.397-406
• /
• 2010

멜론과 참외의 국내 소비 시장이 확대됨에 따라 다양한 $F_1$ 품종이 개발되고 있다. 멜론과 참외의 $F_1$ 품종의 순도를 검정하기 위해 포장재배 등의 순도검정법이 이용되고 있으나 시간과 노력이 매우 많이 소요되기 때문에 분자마커를 이용한 순도검정법의 개발이 필요하다. 본 연구에서는 멜론의 EST 염기정보로부터 30개의 SNP 프라이머 조합을 고안하여 멜론과 참외의 순도 검정을 위한 HRM분석방법을 개발하였다. 멜론 두 품종과 참외 한 품종의 양친 사이에 HRM 해리곡선의 다형성을 보이는 10개의 마커를 선발하였으며 순도검정 마커를 선발하기 위해 blind test를 실시하였다. Blind test와 HRM 유전형 분석 결과가 일치하였으며 MEL SNP 2번과 12 마커를 이용하여 '레드 퀸'과 '얼쓰 VIP'의 $F_1$ 501개 개체에 대해 순도검정을 실시하였다. HRM분석한 결과 모두 이형집합체로 나타나 100%의 순도를 보였다. 또한 HRM 방법을 이용하여 개발한 SNP 마커를 CAPS 마커로 전환하였다. CAPS 마커는 HRM 분석 마커와 비교하여 볼 때 멜론과 참외의 순도검정용 마커로 더 유용하게 활용될 수 있을 것으로 기대된다.

• 대한기계학회논문집A
• /
• 제41권10호
• /
• pp.997-1004
• /
• 2017

엘리베이터 와이어로프의 수명은 제품의 매우 중요한 특성 가운데 하나로서 사용자의 안전 및 장비의 정비 정책과 밀접한 관계가 있다. 엘리베이터 와이어로프의 수명을 사용조건에서 측정하는 것은 매우 비경제적이다. 이 연구에서는 엘리베이터 와이어로프 (8x19W-IWRC)의 가속열화시험 데이터를 활용하여 와이어로프의 수명을 추정하는 방법을 다루었다. 굽힘피로시험기를 이용하여 가속열화시험을 진행하였으며 가속변수로는 인장하중을 사용하였다. 와이어로프의 수명은 대수정규분포를 가정하였고, 선형회귀모형을 이용하여 가수명을 구한 후 가속수명모형을 이용하여 와이어로프의 수명을 추정하는 방법과 고장 확률에 대한 로지스틱 회귀모형을 이용하여 추정하는 방법을 제시하고 두 모형의 수명 추정결과를 비교하였다.

• 오토저널
• /
• 제10권2호
• /
• pp.54-60
• /
• 1988

This paper presents a study of tool-life equation on cut-off test by the statistical approach, referred to as response surface methodology instead of a conventional one-variable at a time method. It is the merit of response surface methodology that the test time is reduced to minimize the size and accurate analysis can be done. The reliability of such an equation can also be estimated. Two independent variables, cutting speed and feed rate, were investigated. A first order modeling equation is presented in this project. The results of this study are as follows that tool-life in cut-off operation is affected by cutting speed more than feed, and first order tool-life predicting equations are in good agreement with experimental results.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.127-133
• /
• 2002

The objective of this study is to investigate fatigue life and fatigue crack propagation behavior The experiment of fatigue life for MMC have been carried out for the stress ratio R＝0.1 at 20Hz. Fatigue lift limit of AC4CH alloy is about 70 ㎫ and Fatigue limit of MMC has been increment to 120 ㎫, therefore, fatigue limits of MMC is about 71 % higher than that of AC4CH alloy Crack propagation tests on half-size CT specimen of thickness 12.5mm were conducted by using sinusoidal waveform. The crack length was monitored by compliance method. Test conditions were at 0.1 and 0.05 of load ratio at 10Hz of loading frequency and test load was 2.3kN. The effects of stress ratio on the fatigue crack propagation behavior for MMC was discussed within the Paris law. As the results of this study, Fatigue crack propagation increased with increasing the load ratio.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.134-140
• /
• 2016

Main Spindle System has effect on performance of machine tools and working quality as well as is required of high reliability. Especially, it takes great importance in producing automobiles which includes a large number of working processes. However, main spindle unit in Machine tools are often cases where damage occurs do not meet the design life due to driving in harsh environments. This is when excessive maintenance and repair of machine tools or for damage stability has resulted in huge economic losses. Therefore, this studying propose a method of accelerated life test for diagnosing and prognosis the state of life assessment main spindle system. Time status monitoring of diagnostic data - through the analysis of the frequency band signals were carried out inside the main spindle bearing condition monitoring and fault diagnosis.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2009년도 추계학술대회
• /
• pp.234-240
• /
• 2009

The growing mobile products market is expected energy efficiency. So product design is more important focusing on reducing power consumption than improving technology of color sense. A Organic light emission diode is in limelight of the best display to satisfy market expectation. A Organic light emission diode is achieved low power consumption, pixel response which was fast for its time, high contrast of brightness and wide color reproduction raio. Therefore there is a fierce competition for the organic light emission diode development between a country and another country over business. The technical value's life is short because of a fierce development competition, and there is little probability that technical success become business success. In this study, the purpose is reduce the time for life test by accelerated current and it can do production possible design by accelerated life model in design phase.

• 기본간호학회지
• /
• 제20권4호
• /
• pp.381-388
• /
• 2013

Purpose: This study was done to investigate nurses' awareness of death and the meaning of life and identify factors influencing the meaning of life. Methods: Participants were 198 women nurses who had experienced the death of patients. They answered a self-administered questionnaire including demographics, awareness of death scale and meaning in life II scale. Data were analyzed using descriptive statistics, t-test, ANOVA, Scheff$\acute{e}$ test, and multiple regression (enter method). Results: The average score for awareness of death was $127.3{\pm}10.14$. This score is moderate not biased toward positive or negative. The average score for meaning of life was $130.3{\pm}9.42$ with 51% for loss steps, 45.5% for pursuit steps and 3.5% for discovery steps to the meaning of life. Factors affecting the meaning of life were religion, Buddhism (${\beta}=6.25$, p=.015) or Atheist (${\beta}=5.91$, p=.017), educational level, Master's or higher (${\beta}=16.22$, p=.003), work department, special department (${\beta}=3.49$, p=.017). Conclusions: Results of the study indicate a need to provide nursing programs that will promote nurses' spiritual and inner maturity.

• 가정∙방문간호학회지
• /
• 제19권2호
• /
• pp.183-194
• /
• 2012

Purpose: The purpose of this study was to compare the quality of life(QOL) between middle-aged women and men. Method: In this study, we surveyed 482 middle-aged women and men living in Seoul aged between 40 and 64. Data were analyzed t-test, ${\chi}^2$-test, and 2-way ANOVA. Results: There was no significant difference between satisfaction and importance of the life of middle-aged women and men of the overall. However, while the case of middle-aged women showed a significant difference in the emotional support from people who are not family members, middle-aged men showed significant differences between the importance and satisfaction of the life with spouse, the ability to take care of family responsibilities, sex life, energy(fatigue), personal appearance, and pain. In addition, the overall quality of life scores showed no gender difference between the middle-aged women and men but in the quality of life both genders, the family area of the sub-area showed high scores. Conclusion: It is suggested that further repetitive studies for middle-aged women and men are needed by using the same tool of this study and various health promotion programs based on the result of this study should be developed for middle-aged.

• 농촌계획
• /
• 제10권3호
• /
• pp.41-51
• /
• 2004

This study aims to develop a potential evaluation method for urban spatial expansion using remote sensing (RS) and geographic information system (GIS). A multi-criteria evaluation method with several criteria and their weighting values was introduced to evaluate the score and quantification of the potential surface around the existing cities. The six criteria with one geographic factor, slope, and five accessibility factors, time distance from center of the city, national road, interchange of expressway, a big city, and station, were defined for the potential. RS techniques were applied for classification of the actual urban expansion maps between two periods, and GIS functions were used for score of accessibility criteria with a distance decay function from geographic, road and several point maps, which was developed in this study. The new methodology was applied to a test area, Suwon, between 1986 and 1996. In order to optimize the six weighting values, this study made new findings to search the optimal combination of the weighting values from new methodology, weighted scenario method for intensity order (WSM), combined with intensity order and AHP method, including a trial and error method for sensitivity analysis to make the intensity order. The optimal combination of the weighting values by the new method generated the optimal potential surface, considering spatial trend of urban expansion in the test area.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권3호
• /
• pp.180-191
• /
• 2016

Purpose: The purpose of this study was to develop the accelerated life test method for Constant Electrical Potential Electrolysis gas sensor (CEPE gas sensor). Methods: The parts and modules of CEPE gas sensor were analyzed by using Reliability Block Diagram (RBD). Failure Mode and Effect Analysis (FMEA) and Quality Function Deployment (QFD) methods were performed for each part to determine the most affecting stress factor in its life cycle. The long term testing was conducted at three different dry heat levels and the acceleration factor was developed by using Arrhenius relationship. Conclusion: The acceleration factor for CEPE gas sensor was developed by using FMEA, QFD, and statistical analysis for its failure data. Also qualification tests were designed to meet the target life.