• The Korean Journal of Pesticide Science
• /
• v.16 no.2
• /
• pp.121-130
• /
• 2012

In analyzing pesticide residue, LLE (liquid liquid extraction) is generally applied as one of the existing methods, but needed quite a lot of organic solvents and analytical apparatuses for the sample pre-treatment. In addition to its long analysis time and complex analytical processes, it is required to develop a more rapid and efficient method at present. In order to establish an economic and simple pesticide residue analytical method, this study carried out a comparative experiment on the existing analytical method with a new sample pre-treatment method named QuEChERS (quick, easy, cheap, effective, rugged and safe), which extracts and refines pesticide components by directly adding solid powder into the sample. Both the two analytical methods showed favorable values of correlation coefficient ($R^2$ > 0.99) of calibration curves. In terms of the detection limit (identification limit), imidacloprid showed 0.02 mg/kg, while the rest of pesticides showed a level around 0.05 mg/kg. The results of this experiment revealed that the recovery of LLE was 92.8-100.9% and the RSD was below 2.5%. On the other hand, the recovery of QuEChERS was 92.2-101.6% and RSD was below 1.9%. As a result of comparing the amount of pesticide residue by the time between the two analytical methods by using Paired t-Test, there was no significant difference between the two analytical methods as the p-value ranged from 0.3148-0.9890. Considering the results of the two methods, the QuEChERS method had similar recovery, compared to the analytical method using the existing LLE, and the analytical time was shortened by about one fourth of that of the existing method. Moreover, since it excludes the use of harmful organic solvents like dichloromethane during the process of extraction, thus leading to protecting experimenters health and remarkably reducing the amount of disused solvents, it is judged as an echo-friendly and economic analytical method.

• The Korean Journal of Pesticide Science
• /
• v.16 no.3
• /
• pp.217-221
• /
• 2012

This study was carried out to evaluate residual characteristics of tolclofos-methyl in ginseng and elucidate the reason for its high detection rate from fresh ginseng selling at markets. Seeds of ginseng were sowed after seed dressing with tolclofos-methyl and after a year of growth, the young seedlings were transplanted to field. They were then harvested annually until three-years of growth and the pesticide residue was analyzed in them. LOD and LOQ of the pesticide were 0.001 and 0.003 mg/kg, respectively. Recovery test was carried out to validate the analytical method for tolclofos-methyl in ginseng. The ginseng seedlings were fortified with the test pesticide at the level of LOQ, ten times of LOQ and maximum residue concentration of tolclofos-methyl. Its recovery ranged from 77.37 to 100.16%. Residual concentration of tolclofos-methyl in ginseng seedlings just before transplanting and two-year-old ginseng were from 7.58 to 8.05 and from 6.46 to 6.79 mg/kg, respectively. In case of three-year-old ginseng, it was found to be from 4.18 to 4.35 mg/kg. As a result of annual pesticide residue analysis, concentration of the pesticide was found to decrease time-coursely in ginseng. This may be due to decomposition and increasing of fresh weight of the ginseng during the cultivation periods of three years.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.2
• /
• pp.133-140
• /
• 2016

Software reliability in the software development process is an important issue. Software process improvement helps in finishing with reliable software product. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, we were proposed the reliability model with the exponential and inverse exponential distribution, which made out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on mean square error (MSE) and coefficient of determination($R^2$), for the sake of efficient model, were employed. Analysis of failure, using real data set for the sake of proposing the exponential and inverse exponential distribution, was employed. This analysis of failure data compared with the exponential and inverse exponential distribution property. In order to insurance for the reliability of data, Laplace trend test was employed. In this study, the inverse exponential distribution model is also efficient in terms of reliability because it (the coefficient of determination is 80% or more) in the field of the conventional model can be used as an alternative could be confirmed. From this paper, the software developers have to consider life distribution by prior knowledge of the software to identify failure modes which can be able to help.

• The Korean Journal of Pesticide Science
• /
• v.14 no.4
• /
• pp.361-370
• /
• 2010

Considering the efficiencies of the preparation process at each stage obtained in previous studies, the analytical determination method was established for multi-pesticide residues in soils. It consist of the acetone-extraction, the dichloromethane-partition, the Florisil or silica-gel chromatography and the gas chromatography analysis equipped with the electron capture detector and the nitrogen-phosphorus detector. In the soil recovery test by Florisil clean-up system, the number of pesticides recovered in the range of 70~120% and showed less than 20% of RSD were 165 pesticides for paddy soil, 169 pesticides for upland soil and 159 pesticides in both soils through the tested 183 pesticides. And in the soil recovery test by silica-gel system, the number of pesticides recovered in the range of 70~120% and showed less than 20% of RSD were 154 pesticides for paddy soil, 145 pesticides for upland soil, and 134 pesticides in both soils.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.171-180
• /
• 2017

The purpose of this study is to determine an effective training method to improve sequela, since traumatic brain injury sequela is a major factor in determining the quality of life. Neurofeedback training was conducted for an adolescent who had experienced traumatic brain injury during his childhood and who had difficulty in cognitive learning and emotional aspects. The assessment of an adolescent was conducted using K-WAIS-IV intelligence test and QEEG brain wave analysis. In the neurofeedback training, T3 alpha wave compensation and T4 alpha wave inhibition training were performed 36 times for 30 minutes three times a week. In addition to the neurofeedback training, respiratory meditation was also made available to the adolescent. As a result, the adolescent showed a stable condition as indicated by taking a good sleep, reducing test anxiety, and satisfaction with final exam results. This study revealed the possibility for hidden physical and psychological problems arising due to childhood brain trauma. It has also recently been discovered that a more diverse set of tools can be found. In addition, these childhood traumatic brain injuries can be improved through brain training and meditation. The study finding is meaningful for its suggestion of a fusion method for developing mind and body therapy in terms of brain science.

• Journal of Forest and Environmental Science
• /
• v.34 no.3
• /
• pp.224-234
• /
• 2018

An efficient method to select drought tolerant Korean native plants using in vitro culture system was established in this study. While the plant growths and root inductions of each plant were proportionately affected by concentrations of mannitol on in vitro culturing seven plant species to test tolerance to osmotic stress, growth index (GI) and number of root induction of Chrysanthemi zawadskii var. latilobum and Dianthus chinensis var. semperflorens plantlets were higher than the others in 125mM mannitol. In test with polyethylene glycol (PEG), plantlets of C. zawadskii var. latilobum and D. chinensis var. semperflorens showed higher GI and number of root induction than the others in 33.3mM. On testing whether the well grown plants under osmotic stress are tolerant to virtual drought stress, there were significant differences in the withering rates of C. zawadskii var. latilobum and D. chinensis and those of were Aster yomena and Centaurea cyanus after 12 days without watering. It was found that significantly lower stomata numbers were shown in both drought tolerant plants than the sensitive plants. Averages of the stomata circumferences and the stomata area in the plantlets of the tolerant species were larger than those of the sensitive plants D. chinensis var. semperflorens showed the lowest transpiration level per unit area. The highest stomatal area per unit area was found in C. zawadskii, followed by D. chinensis var. semperflorens, Aster yomena and C. cyanus. In conclusion, C. zawadskii var. latilobum and D. chinensis var. semperflorens were more tolerant to drought than other two species. Furthermore in vitro selection was successfully used to screen drought tolerance species of native plant species.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.165-172
• /
• 2013

Power generating unit structures are designed and built to meet standard to secure its safety for expected life time. As the structures have been exposed to combined environment, degradation of structure material is accelerated and it can cause unexpected damage; evaluating precise mechanical properties of weak site like welded area is an essential research area as it is directly connected to safety issues. Existing measuring technique like tensile test requires specific size in testing specimen yet it is destructive method which is hard to apply on running structures. To overcome above mentioned limitation, IIT is getting limelight as it is non-destructive and simple method. In this study, latest technique is introduced to evaluate tensile property and residual stress by analyzing stress field occurs under the indenter while IIT is performed. Test on welded area, the weak site of nuclear structures have been practiced and confirmed that IIT can be usefully applied to evaluate integrity in industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode) is used in various filed like a display because of low power consuming, long life span, high brightness, rapid response time and environmental-friendly characteristic. General fabrication method is combination blue light LED chip with yellow fluorescent substance. Because this way is suitable for industry field in terms of convenience, economic, efficiency. In white light LED packaging process, encapsulation process that is dispensing fluorescent substance with silicon to blue light LED chip is most important. So, in this paper we develop EHD pump system using voice coil motor and electrostatic pump for dispensing fluorescent substance. For these things we conduct basic test about liquid surface profiles by voltage and process time. Through this data we decide optimal process condition and verify the optimal condition using design of experiment method. And to confirm uniformity of the condition, we conduct repeat dispensing test.

• Journal of dental hygiene science
• /
• v.17 no.2
• /
• pp.175-182
• /
• 2017

From March 1, 2016 to August 31, 2016, 375 dental implant patients between the ages of 30 and 70 years to evaluate their subjective symptoms and satisfaction according to prosthesis methods. The collected data were analyzed using the chi-square distribution test, t-test, one-way analysis of variance, and multiple logistic regression. Of the patients with subjective symptoms of peri-implantitis, 40.5% reported food impaction, 49.1% reported bleeding, 61.1% reported pain, 61.9% reported halitosis, and the overall satisfaction level with the implants was 3.95 points. In the prosthesis methods, implant-teeth connective group showed the lowest level of the food impaction (21.3%), the pain (35.5%), and the halitosis (36.6%) (p<0.001), and the lowest bleeding was the implant single (33.8%) (p<0.05). Patient satisfaction was higher in the implant-teeth connective group (4.06 points) and the group without bone grafting (4.03 points) (p<0.01). Factor analysis showed that implant satisfaction was 0.43 times lower in the single implant group and 0.44 times lower in the implant-implant connective group than in the implant-teeth connective group. As a result of the study, it is expected that the method of extending the life of adjacent teeth and restoring the function of the tooth defect region is an implant-teeth connection method, so that it can be utilized positively through various clinical studies.

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.179-189
• /
• 2005

Corrosion of steel due to chloride attack is a major concern in reinforced concrete structures which are located in the marine environments. In this case, Fick's 2nd law has been used for the prediction of chloride diffusion related with service life of concrete structures. However, those studies were confined mostly to the single deterioration due to chloride only, although actual environment is rather of combined type. The purpose of the present study is, therefore, to explore the influences of carbonation to chloride attack in concrete structures and to investigate the validity of Fick's law to chloride attack combined carbonation. The test results indicate that the chloride ion profiles from Fick's law using the diffusion coefficient of immersion tests is not reflected the effect of separation of chloride ions in carbonation region but valid in sound region in case of combined action. On the other hand, the chloride ion profiles from Fick's law using the diffusion coefficient of Tang and Nilsson's method coincide with test results under dry-wet condition but not under combined condition. The results of present study may Imply that the new method for the measurement of diffusion coefficient is required to predict the chloride ion profiles in case of combined action at early.