• Fashion & Textile Research Journal
• /
• v.19 no.2
• /
• pp.221-229
• /
• 2017

This study researched the needs of smart fashion items using energy harvesting for outdoor wearers and surveyed the application areas and design preferences for energy-harvesting systems based on outdoor activities. A total of 217 subjects were surveyed. Subjects who had at least 3 years of experience in outdoor activities were selected in order to increase the reliability of the research results. The survey investigated lifestyles based on outdoor activities, outdoor clothing and electronic equipment usage, purchase style, utilization plan, and design preference for energy-harvesting clothing and supplies. The results showed that 62.7% of the respondents had experience in outdoor activities for more than five years. 96.3% of the subjects carried electronic equipment, and 179 participants(82.5%) experienced discomfort due to battery consumption/dead batteries during outdoor activities. 78.4% were interested in smat fashion items using energy-harvesting technology, and the energy-conversion technology that was useful for outdoor activities was "kinetic energy"(74.7%). Participants showed a high preference for a detachable type(30.9%) and a city type(69.1%) that can be worn in outdoor activities as well as in general life. The preferred location of the electric power-charging device was the "Hem area of top garment"(35.9%), and the reason for this selection was that it was easy to operate and did not interfere with movement. The data from this paper can be used as a basis for product planning and product design for energy-harvesting apparel designers and supply developers for outdoor clothing.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.490-500
• /
• 2017

Fuel cell (FC) is a promising power supply in electric vehicles (EV); however, it has poor dynamic performance and short service life. To address these shortcomings, a super capacitor (SC) is adopted as an auxiliary power supply. In this study, the frequency decoupling control method is used in electric vehicle energy system. High-frequency and low-frequency demand power is provided by SC and FC, respectively, which makes full use of two power supplies. Simultaneously, the energy system still has rapidity and reliability. The distributed power system (DPS) of EV requires DC-DC converters to achieve the desired voltage. The stability of cascaded converters must be assessed. Impedance-based methods are effective in the stability analysis of DPS. In this study, closed-loop impedances of interleaved half-bridge DC-DC converter and phase-shifted full-bridge DC-DC converter based on the frequency decoupling control method are derived. The closed-loop impedance of an inverter for permanent magnet synchronous motor based on space vector modulation control method is also derived. An improved Middlebrook criterion is used to assess and adjust the stability of the energy system. A theoretical analysis and simulation test are provided to demonstrate the feasibility of the energy management system and the control method.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.95-99
• /
• 2017

The lifetime of a battery that supplies all the power required by a satellite in the eclipse is directly related to the lifetime of the satellite. Because the lifetime of the battery is influenced by the charging method of the battery, the power control unit that controls the charging of the battery should be designed in consideration of battery life. The battery charging is performed by controlling the charge current in the power control unit generated from the solar cell in the daytime. In order to prevent overcharge of the battery and for considering frequency of eclipse in each season, parameters related battery charging should be designed differently according to the season and to prevent over-current charging and over-voltage charging during charging, charge current is controlled by monitoring battery charge / discharge status, charge current amount, battery voltage, battery capacity, battery temperature and battery cell voltage. In satellite, tapering method is used to control charge current by reflecting each condition. In this paper, design battery charging algorithm of satellite power control unit using tapering charging method. convert the designed algorithm into a code that can be uploaded to satellites and verify the operation through testing in the established satellite environment.

• The Korean Journal of Community Living Science
• /
• v.23 no.3
• /
• pp.347-356
• /
• 2012

This study was conducted to investigate pregnant women's experience about nutrition education for pregnant women in order to improve nutrition education programs. The questionnaires were distributed to 185 women with children whose age of under 24 months. About 46% of respondents participated in nutrition education for pregnant women. Major reasons for nonparticipation was 'no information(47%)' and 'lack of time(32%)'. About 40% of women attended to education operated by health centers, 34% maternity hospitals, 26% companies of formula or baby supplies. Participation rate in nutrition education showed significant differences(p<0.05) with age and household income. Women in their forties and with monthly income over three million Won showed higher rates than those of women in other groups. The subjects of education were nutrient supplements for pregnant women(21%), pregnancy complications and health(19%), abnormal symptoms of pregnancy and nutrition (18%), weight gain during pregnancy(17%), dietary guideline and directions for pregnancy (15%), relationship between nutrition of pregnant woman and baby's health(10%) in order. Teaching method which was used most frequently was lecture(35%). About 74% of women were not satisfied with the education. Nutrition management for pregnancy was the subject which pregnant women wanted to learn but not been taught enough. About 80% of women wanted more education and preferred personalized education such as personal counselling (30%), home visitation(26%), telephone(16%) and internet(15%) counselling. These results showed nutrition education for pregnant women was unhelpful for practical life. Therefore, nutrition education programs for pregnant women has to reflected pregnant women's individual needs to heighten the effectiveness of nutrition education.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.34-36
• /
• 2002

Epidermal growth factor (EGF) and insulin-like growth factor-I (IGF-I) have been shown to stimulate proliferation and differentiation of various somatic cells, including placental trophoblasts and also to enhance fetal growth and development when maternally administered. Since an increase of the expression of placental EGF and IGF-I receptors in rat, mouse, and human with the gestation advanced, both EGF and IGF-I were considered to play pivotal roles on fetal growth by regulating some function of placental cells. Amino acids are crucial importance for both maternal and fetal requirements of energy source and essential constituent of fetal mass during pregnancy. Impaired fetal and placental uptake of amino acids has been observed in several models of growth retardation in the rat. Amino acid is concentrated in the fetal side through active transport by amino acid transporters and is one of the important metabolic fuels for the fatal growth. Therefore, at first plasma amino acid concentrations in mothers and fetuses were measured as an index of uphill transport across the placenta associated with EGF and IGF-1. The EGF administration at the concentration of 0, 0.1, or 0.2 $\mu\textrm{g}$/g to pregnant rats from day 18 to 21 of gestation apparently increased fetal/maternal ratio of serum proline concentration and also fatal growth in EGF dose-dependent manner. When IGF-I in doses of 0, 1, 2, and 4 $\mu\textrm{g}$/g were administrated, the ratio of leucine, isoleucine, tryptophan, phenylalanine, tyrosine and also fetal growth significantly increased with a dose-dependent manner. These results suggested that EGF and IGF-I enhanced fatal growth by, as one of its possible mechanisms, promoting placental activity to transfer some amino acid supplies from the mother to the fetus in late pregnancy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.259.1-259.1
• /
• 2014

Recently non-thermal plasma has been frequently applied to various research fields. The liquid plasma have received much attention lately because of interests in surgical and nanomaterial synthesis applications. Especially, intensive researches have been carried out for non-thermal plasma in liquid by using various electrode configurations and power supplies. We have developed a bioplasma source which could be used in a liquid, in which outer insulator has been covered onto the outer electrode. Also we have also put an insulator between the inner and outer electrode. Based on the surface discharge mode, the nonthermal bioplasma has been generated inside a liquid by using an alternating current voltage generator with peak voltage of 12 kV under driving frequency of 22 KHz. Here the discharge voltage and current have been measured for electrical characteristics. Especially, We have measured discharge and optical characteristics under various liquids of deionized (DI) water, tap water, and saline by using monochromator. We have also observed nitric oxide (NO), hydrogen peroxide (H2O2), and hydroxyl (OH) radical species by optical emission spectroscopy during the operation of bioplasma discharge inside various kinds of DI water, tap water, and saline. Here the temperature has been kept to be $40^{\circ}C$ or less when discharge in liquid has been operated in this experiment. Also we have measured plasma temperature by high speed camera image and density by using either H-alpha or H-beta Stark broadening method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.268-275
• /
• 2020

In domestic mountain resort areas, a catenary system cannot be installed for the protection of the natural environment and view. Therefore, mountain trams must be operated wireless. In this study, a local ground pantograph, which supplies electricity to the battery on board, was developed for this purpose, and its performance was verified by tests. The system is installed on ground at stops or repair shops. While a bogie goes to the pantograph, the arms and collection shoes are raised by a spring force to make contact with the collection bar under the bogie so electric power can be supplied to the battery. Because it is a local ground type, it does not require a roof pantograph and catenary system. The system enables the mountain tram to run wireless. In addition, there is no separation and arc because it collects current while standing at stops or shops. The system has a long life because moving contact, which generates wear and damage to shoes, is avoided. The insulation resistance was above the criteria of 10 ㏁, and there was no abnormal temperature increase when a current of 335A was supplied for one hour.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.1 no.1
• /
• pp.23-30
• /
• 2015

Radioisotopes emitting low-range highly ionizing radiation such as ${\beta}$-particles are of increasing significance in internal radiotherapy. Among the ${\beta}$-particle emitting radioisotopes, $^{67}Cu$ is an attractive radioisotope for various nuclear medicine applications due to its medium energy ${\beta}$-particle, gamma emissions, and 61.83-hour half-life, which can also be used with $^{64}Cu$ for PET imaging. The production and application of the ${\beta}$-emitting radioisotope $^{67}Cu$ for therapeutic radiopharmaceutical are outlined, and different production routes are discussed. A survey of copper chelators used for antibody labeling is provided. It has been produced via proton, alpha, neutron, and gamma irradiations followed by solvent extraction, ion exchange, electrodeposition. Clinical studies using $^{67}Cu$-labelled antibodies in lymphoma, colon carcinoma and bladder cancer patients are reviewed. Widespread use of this isotope for clinical studies and preliminary treatments has been limited by unreliable supplies, cost, and difficulty in obtaining therapeutic quantities.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.6
• /
• pp.887-894
• /
• 2014

Objectives: The purpose of this study was to investigate the oral health education and oral health care in the implant wearers. Methods: A self-administered questionnaire was conducted by 253 patients in 14 different dental hospitals and clinics in Seoul and Gyeonggi-do from July 1 to September 30, 2012. The instrument was adapted from Kang and Lee, Yu and Shim, and Ko and Jang on the basis of the previous study. The questionnaire consisted of 12 questions including general characteristics of the subjects(4 questions), oral health education(3 questions), behavior and attitude of tooth brushing(3 questions), and use of auxiliary supplies(2 questions). Results: 1. 38.3% of the patients received the dental care education for the first time. The most common education method was demonstration by dental hygienists(28.9%). 26.2% of the patients wanted to know the right toothbrushing method. 2. The best toothbrushing methods were rolling method(28.9%) and Leonard's method(28.9%). 19.4% of the patients changed the toothbrushing method after education. 22.5 percent brushed their natural teeth and implant teeth by a different maneuver. 3. The interdental brush was the most commonly used product(35.8%) and most of the patients the interdental brush once a day(36.6%). 4. There was a significant difference between the frequency of toothbrushing and method(p<0.05). 5. There was a significant difference between the separate brushing of implant and natural teeth by the frequency of toothbrushing and method of education(p<0.05). 6. Use of interdental brush had an influenced on education method(p<0.05). Conclusions: Regular dental checkup and use of interdental brush can improve the oral care for the implant wearers. Regular use of interdental brush can prolong the life span of implant tooth and keep the patients' teeth in good condition.

• Journal of Animal Environmental Science
• /
• v.17 no.1
• /
• pp.33-38
• /
• 2011

Economic development involves increase in life expectancy as well as human health care. Consequently, demand for fish meal and fish oil is rapidly growing. In particular, Krill (Eupausia superba) oil product is in high demand due to its rich unsaturated-fatty acid, and thus stable supplies are necessary in the krill oil market. It is required for captured krills to be immediately frozen and stored during ship transport, since proteins of the krill are quickly denatured in natural temperature condition. However, the transportation cost has been sharply increased, which encourages researchers to involve in studies for development of efficient oil extraction process. In this study, a solid/liquid separation technique on boat for the krill oil was developed through triple separation tests using only a separator or using either brush or crusher prior to the separator. The separation tests revealed that the efficiency were 46.2, 60.2 and 60.4 % by the separator, combination with brush, and combination with crusher, respectively. In addition, it was found that byproduct, extracted cake, derived from the separation process could be used as a feed stuff. These results suggest that smashing using the brush or crusher prior to the separator is more efficient than using only the separator.