• Structural Engineering and Mechanics
• /
• v.49 no.2
• /
• pp.225-235
• /
• 2014

Cold expansion is an efficient way to improve the fatigue life of an open hole. In this paper, three finite element models have been established to bind the crack growth from an expanded hole and simulated. Expansion and its degree influence are studied using a numerical analysis. Stress intensity factors are determined and used to evaluate the fatigue life. Residual stress field is evaluated using a nonlinear analysis and superposed with the applied stresses field in order to estimate fatigue crack growth. Experimental tests are conducted under constant loading. Results of this investigation indicate expansion and its degree are beneficial to fatigue life and a good agreement was observed between FEM simulations and experimental results.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.1
• /
• pp.55-61
• /
• 2000

Physicochemical and sensory characteristics of Yukwa(fried rice cookie) made by different processing condition were investigated to estabilish the optimum expansion of Yukwa. The expansion rate and crispness of Yukwa prepared by soaking waxy rice for 24 hours was satisfactory . Addition of 15% soy slurry gave better effect on increasing the expantion rate, crispiness and sensory preference than no addition of soy slurry . Yeast, Soju(distilled liquor) , Mackeali(rice wine, turbid) and Chunju(rice wine, clear) as expansion reagent were added to Yukwa prepration . Yeast and Mackeali among tested expansion reagent showed better expansion rate and lower hardness meausred by texturometer than Chunju. Yukwa added chungju showed more fine structure and lower expantion rate than others. Microwave puffed Yukwa was less expansion rate, but same level of crispiness and hardness compared with oil puffed. And no difference in sensory characteristics such as degree of crispiness and stickiness of microwave puffed and oil puffed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.1 s.113
• /
• pp.54-61
• /
• 2006

Basically corrugated board is composed of three layers of different basis weight and stock composition. Warp is well-known for one of the most important problems of corrugated board production. Warp is caused by difference of hygro-expansibility of linears between top and bottom. This research was performed to evaluate the effect of paper properties on the warp of corrugated board. To evaluate warp, dynamic expansion properties of paper was tested using DPM(dynamic penetration measuring system). The effects of sizing, stock composition and wet-pressing on dynamic expansion properties were also evaluated. Commercial base papers showed different dynamic expansion property depending on stock composition and papermaking operation. Sizing treatment decreased and wet-pressing increased the amount of dynamic expansion. To reduce warp of corrugated board, management of dynamic expansion of base papers should be controlled by manipulating moisture, heat and tension, using a variety of adjustments available on the corrugator.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.9 s.252
• /
• pp.1110-1115
• /
• 2006

Cold expansion of fastener holes has been successfully used for many years to impart beneficial compressive residual stresses. Beneficial compressive residual stress of fastener hole that has been cold expanded before is reduced by using of materials for a long time. As a result, fatigue life of material is reduced. So, compressive residual stresses of material have to regenerate by re-cold expansion method. In this paper, it was carried out a finite element analysis about variation of residual stress due to tensile stress and residual stress distribution that was regenerated by re-cold expansion method in the fastener hole. Here, a diversity tensile stress was used. Also, it was performed a finite element analysis according to cold expansion rate of re cold expansion in order to obtain a beneficial compressive residual stress.

• Development and Reproduction
• /
• v.22 no.4
• /
• pp.297-307
• /
• 2018

The objective of this study was to evaluate the effects of alpha-linolenic acid (ALA) during in vitro maturation (IVM) on cumulus expansion, nuclear maturation, fertilization capacity and subsequent development in porcine oocytes. The oocytes were incubated with 0, 25, 50, and $100{\mu}M$ ALA. Cumulus expansion was measured at 22 h, and gene expresison and nuclear maturation were analyzed at 44 h after maturation. Then, mature oocytes with ALA were inseminated, and fertilization parameters and embryo development were evaluated. In results, both of cumulus expansion and nuclear maturation were increased in $50{\mu}M$ ALA groups compared to control groups (p<0.05). However, expression of gap junction protein alpha 1 (GJA1, cumulus expansion-related gene), delta-6 desaturase (FADS1, fatty acid metabolism-related gene), and delta-5 desaturase (FADS2) mRNA in cumulus cells were reduced by $50{\mu}M$ ALA treatment (p<0.05). Cleavage rate was enhanced in 25 and $50{\mu}M$ ALA groups (p<0.05), especially, treatment of $50{\mu}M$ ALA promoted early embryo develop to 4 and 8 cell stages (p<0.05). However, blastocyst formation and number of cells in blastocyst were not differ in 25 and $50{\mu}M$ ALA groups. Our findings show that ALA treatment during maturation could improve nuclear maturation, fertilization, and early embryo development through enhancing of cumulus expansion, however, fatty acid metabolism- and cumulus expansion-related genes were down-regulated. Therefore, addition of ALA during IVM of oocytes could improve fertilization and developmental competence, and further studies regarding with the mechanism of ALA metabolism are needed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.35-40
• /
• 2003

Cold expansion method is an effective process to retard the crack initiation at a hole and to improve fatigue life by developing the compressive residual stress around the hole. Several researches have been treated for the crack propagating toward a hole around which the residual stress by cold expansion exists. The objective of this paper is to evaluate the fatigue characteristics under the residual stress by cold expansion. Fatigue tests are performed for the plate with a central hole to which cold expansion has been applied, and the effects of the residual stress on the fatigue life are evaluated. Also the fatigue crack growth tests are conducted for the CT specimen in which the residual stress by cold expansion has been generated. The change of fatigue crack growth characteristics by the residual stress is investigated and the effects of cold expansion ratio are evaluated.

• Journal of Korean Society of Rural Planning
• /
• v.10 no.4 s.25
• /
• pp.9-18
• /
• 2004

The purpose or this study is to simulate spatially the urban expansion phenomena with a cellular automata (CA) technique using GIS. A study area, Suwon city, was selected for test of model verification and application with the classified land-use maps of three data years: 1986, 1996, and 2000. The urbanized potential maps were generated with seven criteria of one geographic factor (slope of land), and six accessibility factors (time distances from city, national road, Seoul, station, and built-up boundary), considering their weighting values, which were optimized by WSM (weighted scenario method for intensity order) combined a ranking method and a AHP technique. The optimized weighting values at the urban expansion between 1986 and 1996 were applied to verify the CA model for the other expansion between 1996 and 2000. The results of model application showed that urban sprawl phenomena of the urban expansion toward rural area can be simulated spatially and temporally with several boundary conditions considering various scenarios for the criteria and parameters of the model. Ultimately, this study can contribute to reference data for land-use planning of urban fringe areas.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.47 no.2
• /
• pp.99-114
• /
• 2023

Patanga japonica Bolívar, 1898 (Orthoptera: Acrididae) is listed as a climate-sensitive indicator species in South Korea and is called southern group of insects in that the main distributional range is southern region of South Korea and Asian continent. In South Korea, thus, the species was distributed mainly in southern region of South Korea including southward a remote Jeju Island, but recently the species has often been detected in mid to northern region of South Korea, implying northward range expansion in response to climate change. Understanding the characteristics of the changes in genetic diversity during range expansion in response to climate change could be a foundation for the understanding of future biodiversity. Thus, in this study, we attempted to understand the changing pattern of the genetic diversity of the P. japonica in newly expanded regions. For the purpose of study, we collected 125 individuals from seven localities throughout South Korea including two newly distributed regions (Pyeongtaek and Yeongwol at ~37° N). These were sequenced for a segment of mitochondrial cytochrome oxidase subunit I (COI) and analyzed for genetic diversity, haplotype frequency, and population genetic structure among populations. Interestingly, northward range expansion accompanied only haplotypes, which are most abundant in the core populations, providing a significant reduction in haplotype diversity, compared to other populations. Moreover, genetic diversity was still lower in the expanded regions, but no genetic isolation was detected. These results suggest that further longer time would take to reach to the comparable genetic diversity of preexisting populations in the expanded regions. Probably, availability of qualified habitats at the newly expanded region could be pivotal for successful northward range expansion in response to climate change.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2005.10a
• /
• pp.105-105
• /
• 2005

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2005.10a
• /
• pp.105-105
• /
• 2005