• Journal of the Korean Wood Science and Technology
• /
• 제35권3호
• /
• pp.22-28
• /
• 2007

소나무 간벌재로 톱밥보드를 만든 후 우드세라믹을 제조하여 승온속도 및 최고온도에서의 유지시간에 따른 우드세라믹의 표면온도의 변화를 조사하였다. 승온속도 $2^{\circ}C/min$와 유지시간 1시간의 조건으로 제조된 우드세라믹의 표면 온도가 가장 높았다. 히터의 표면 온도보다 우드세라믹의 표면온도의 하강 속도가 느려 우드세라믹이 오랜 시간 열을 유지하고 있음을 알 수 있었다.

• Animal Systematics, Evolution and Diversity
• /
• 제22권1호
• /
• pp.23-27
• /
• 2006

Subsocial woodroaches of Cryptocercus occur in high mountainous forests in temperate regions and they live in a family in complicated galleries of rotten logs. A prominent feature of the geographical distribution of Cryptocercus is the wide disjunction between the eastern and western species in North America, and between West China and Northeast Asia. Recently, five species of the genus were added from Asian areas and two of them are distributed in Northeast Asian areas. We examined morpho-anatomical structures of male genitalia in Manchurian and Korean Cryptocercus, focusing on male genital hooks and subgenital plates.

• Journal of Microbiology and Biotechnology
• /
• 제19권12호
• /
• pp.1590-1595
• /
• 2009

Alternative methods for controlling bacterial endospore contamination are desired in a range of industries and applications. Attention has recently turned to natural products, such as essential oils, which have sporicidal activity. In this study, a selection of essential oils was investigated to identify those with activity against Bacillus subtilis spores. Spores were exposed to 13 essential oils, and surviving spores were enumerated. Cardamom, tea tree, and juniper leaf oils were the most effective, reducing the number of viable spores by 3 logs at concentrations above 1%. Sporicidal activity was enhanced at high temperatures ($60^{\circ}C$) or longer exposure times (up to 1 week). Gas chromatography-mass spectrometry analysis identified the components of the active essential oils. However, none of the major oil components exhibited equivalent activity to the whole oils. The fact that oil components, either alone or in combination, did not show the same level of sporicidal activity as the complete oils suggested that minor components may be involved, or that these act synergistically with major components. Scanning electron microscopy was used to examine spores after exposure to essential oils and suggested that leakage of spore contents was the likely mode of sporicidal action. Our data have shown that essential oils exert sporicidal activity and may be useful in applications where bacterial spore reduction is desired.

• 여성건강간호학회지
• /
• 제27권3호
• /
• pp.243-255
• /
• 2021

Purpose: This study aimed to develop a lifestyle modification (LSM) mobile application based on the Android operating system for overweight and obese breast cancer survivors (BCS) in Korea and evaluate its usability. Methods: The content analysis, design, development, implementation, and evaluation of the LSM intervention mobile application for overweight and obese BCS was conducted by identifying survivors' needs, searching the literature, and reviewing existing mobile applications. The survey was conducted from June 1 to December 28, 2020 at Jeonju, Korea. Results: The mobile application for BCS included dietary and exercise information, weight logs, as well as distress and daily achievement check. It also included information and videos on the prevention of breast cancer recurrence and used a communication bulletin board. Expert and user usability evaluation of its content and functions confirmed that it was appropriate and satisfactory for overweight and obese BCS. Conclusion: This LSM mobile application developed for overweight and obese BCS was found to be appropriate for use. It can be applied for further study of effectiveness on improving their health and maintaining a healthy lifestyle, to ultimately improve quality of life.

• Journal of the Korean Wood Science and Technology
• /
• 제46권6호
• /
• pp.726-734
• /
• 2018

In this study, for using effectively domestic (temperate) small and medium diameter logs as a wooden floorboard, cross-laminated wood panels were manufactured using domestic larch and tulip woods as a base material for teak and merbau wood flooring, and static bending strength performances were measured to investigate the applicability as the base materials of wooden flooring in place of plywood. Static bending MOE was much influenced by the strength performances of the top layer lamina than that of the laminae for base materials. Bending MOR showed the higher values in tulip wood that was hardwoods than in larch wood that was softwoods regardless of the strength performances of the top layer laminae, and it was found that the values were much influenced by the strength performances of the base materials used in the core and bottom layers. However these values were 1.4-2.5 times higher values than the bending strength of the wooden floorboards specified in KS, it was found that it can be sufficiently applied to the base materials of wooden floorboards in place of plywood.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권6호
• /
• pp.727-731
• /
• 2010

최근 모바일 기기의 다양한 센서들을 통하여 데이타를 수집하여 개인의 삶을 기록하는 연구들이 진행 중이다. 효율적인 모바일 라이프로그의 저장과 탐색을 위해 연관 검색이 가능한 모바일 라이프로그 시맨틱 네트워크가 제안되었다. 기존의 시맨틱 네트워크 상의 검색은 텍스트 기반으로 관계를 바탕으로 하는 사용자의 능동적인 연관 검색에 한계가 있었다. 본 논문에서는 모바일 라이프로그의 연관 검색을 위해 검색 과정과 결과를 시각화된 네트워크로 데이타간의 관계를 보여주는 선택 연관 검색과 키워드 연관 검색을 제안한다. 복잡한 시맨틱 네트워크에 대해서 사용자의 이해도를 높이기 위해 의미 추상화를 적용하였다. 실제 모바일 라이프로그 시맨틱 네트워크 데이타를 바탕으로 질의를 해결하는 과정을 기존 연구에서 보였던 텍스트 기반 연관 검색 방법과 비교하고 사용성 평가를 시행함으로 유용성을 입증하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.57-65
• /
• 2005

Following our previous reports for finger-jointed woods with various finger profiles studied for the efficient use of small diameter logs and woods containing various defects, twelve types of finger-jointed woods glued with three kinds of adhesives and with two sizes of finger pitches were made with sitka spruce and red pine. The effects of the adhesives and finger pitches on bending creep performances of finger-jointed woods were investigated. The shape of creep curves differed among the used adhesives and finger pitches of finger-jointed woods for both tested species. Their creep curves showed a linear behavior beyond about one hour, and the N values fitted to power law increased with increasing finger pitches. The initial deformation increased with increasing finger pitches, regardless of the tested species and kinds of adhesives, whereas the effect of finger pitches on the creep deformation was not clear. For finger-jointed woods glued with polyvinyl acetate (PVAc) resin, creep failure occurred in 106 hours after the load was applied. And the difference of the creep compliance between finger-jointed woods glued with resorcinol-phenol formaldehyde (RPF) resin and aqueous vinyl urethane (AVU) resin was small. The ratios for creep performances of finger-jointed woods glued with RPF resin and AVU resin versus solid wood were higher in creep deformation than initial deformation for both species, and the difference between both adhesives was not found. The relative creep decreased with increasing finger pitches, and the marked differences was not found between RPF resin and AVU resin.

• Journal of the Korean Wood Science and Technology
• /
• 제32권6호
• /
• pp.57-66
• /
• 2004

To study the efficient usage of small diameter logs and woods containing defects such as knots, slope of the grain and decay, six types of finger-jointed woods with various finger profiles were made of poplar, pine and oak with different density. We investigated the effect of finger profile on static bending strength performances of finger-jointed woods. The efficiency of bending MOE, MOR and deflection showed the highest value in poplar finger-jointed wood with the lowest density of three species, and the lowest value in oak finger-jointed wood with the highest density of three species. The values markedly decreased with increasing finger pitch for finger-jointed wood glued with polyvinyl acetate (PVAc) resin for all tested species, whereas for the finger-jointed wood glued with resorcinol-phenol formaldehyde (RPF) resin, the influence of finger pitch on the efficiency of MOE was not found in all tested species, and those on the efficiency of MOR and deflection indicated the same trend as finger-jointed wood glued with PVAc resin in the case of pine and oak finger-jointed wood with higher densities. It was found that the values tended to decrease with increasing density of species on the whole and the desirable finger pitches were L (6.8 mm) for poplar, M (4.4 mm) for pine and S (3.5 mm) for oak in a view of economy. For finger-jointed wood glued with PVAc resin, the fitness between a tip and a root width of a pair of fingers δ of 0.5 mm indicated the highest efficiency of MOE for all species. And, the influence of δ on MOR was only found in oak finger-jointed wood glued with RPF resin and the desirable δ value for oak was 0.1 mm. However, it was found that the influence of δ on the strength performance was very small.

• Journal of the Korean Wood Science and Technology
• /
• 제31권2호
• /
• pp.31-37
• /
• 2003

목재의 결함을 탐지하는 비파괴 진단법 중에서 초음파를 이용한 비파괴 시험법은 그 경제성과 사용에서 큰 장점을 지니고 있어, 그 활용과 관련된 연구가 활발히 진행 중이다. 그러나 현재까지의 연구는 입목 또는 원목 등과 같이 비파괴 평가를 위한 측정이 비교적 적은 경우에 국한되어 있어, 목조 문화재 등을 비롯한 구조물의 부재와 같이 부재의 일부 면만을 측정할 수 있는 경우에 대한 연구가 미비한 실정이다. 따라서 본 연구에는 이러한 초음파 시험기의 측정방법의 제한을 극복하는 방법을 모색하고자 그 첫 번째 단계로 결함을 갖는 목재 내에서 초음파 전달 경로를 구명하고자 하였다. 다양한 전달 경로 모델을 가정하고 실제 실험과 비교를 통해 초음파 전달의 가장 적합한 모델을 제시하고자 한다. 실험 시편에 인위적인 결함을 만들어 실험한 결과 초음파가 직접 전달될 수 없는 부분의 경우 그 결함을 피해서 전달되고 전달 경로는 탐촉자의 반대 측면에서 일차반사를 통해 전달되는 것으로 판단되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권2호
• /
• pp.85-93
• /
• 2010

Japanese cedar has low density and poor mechanical performance. Manufacturing glue-laminated timber (glulam) is the best way to compensate for its poor mechanical performance. The Korean Standard (KS) confines outermost lamina of glulam to higher grade than E8, but the yield of higher than grade E8 from logs is only 6.5%. Therefore, the aim of this study is to investigate the possibility of non-Korean-Standard glulam in structural applications. Allowable stresses determined by both hand-calculation and Monte-Carlo simulation show a higher allowable stress than that of the KS-standard glulam of 6S-22B. In the Korean Standard (KS), knot characteristics are not taken into account. Japanese cedar has relatively small knots. We believe that the small knots in Japanese cedar contribute to a higher allowable stress than the KS-standard glulam would predict. The species classification of KS is required to be further subdivided into sub-species groups based on knot characteristics.