• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.75-80
• /
• 2015

The rebar factory production process involves the repetitive bending of rebars. Therefore, the fatigue failure of the rebar bending machine needs to be considered. In this paper, fatigue analysis of the rebar machine was performed using the commercial software DAFUL, which is based on MFBD (Multi Flexible Body Dynamics). The rotating roller, fixing roller and rebar were modeled by the finite element method. The rebar bending process is simulated and the mechanical stresses on the rollers are calculated. Structural analysis of the rebar bending roller was performed using the maximum bending angle of $180^{\circ}$ and maximum processing rebar diameter of ${\Phi}19mm$. Then, for fatigue analysis, the S-N curve of STD-11 was. The fatigue life of rollers is estimated by modified Goodman diagram. The fatigue life range of the rotating roller is $2.99961{\times}10^5{\sim}1{\times}10^8$ while that of the fixed roller is $2.53142{\times}10^5{\sim}1{\times}10^8$. STD-11 has an infinite life cycle after $1{\times}10^8$. Therefore, the rollers of the rebar bending machine may be expected to suffer fatigue failure. Thus, we performed a parameter study of fatigue life according to various axial radii of the fixed roller and rotating roller, and redesign of the rebar bending machine. Consequently, the axial radius of the fixed roller and rotating roller was found to be 35~37.5mm and 30~35mm, respectively, and an infinite life cycle was confirmed at these.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.66-73
• /
• 2022

In order to induce users to purchase excellent products in the water industry that satisfy the technical standards of excellent products, in this study, it is to present the advantages of the cost aspect of the pumps as the objective basis. It will be to promote technology development of domestic water companies and to create a virtuous cycle structure in the water industry. In order to present an objective basis for the merits in terms of cost, an economic evaluation was conducted through life cycle cost analysis. For the LCC analysis, initial cost (pump cost and installation cost), operation cost (energy cost and maintenance cost) and demolition cost (disposal cost and residual value) are searched and calculated. As the results of comparison on two capacity of pumps, the energy cost of the excellent pump is 212 million KRW lower than the that of general pump in the large pump. The cost of excellent pump was 17 million KRW lower than that of general pump in small capacity pump. As the results of sensibility test, if the product is developed in the direction of improving pump efficiency and increasing the replacement cycle of consumables, it is predicted that the effect on LCC will be large.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1033-1038
• /
• 2005

As a global effort to conservate the environment, life cycle assessment(LCA) which considers the environmental impact through the life cycle of a product, from acquiring of resources to scrapping, has been actively applied. The LCA is a tool to calculate quantitatively the environmental impacts caused by products or services through their life cycles. The list of numerous data should be analyzed, stored and conducted in order to assess the environmental impacts. Therefore, it is necessary to develop a software for LCA, which can perform the interpretation as well as the environment impact assessment to execute the analysis of such a large number of data effectively. At this time, for the existing some kinds of general LCA softwares, the information about all of input and output should be fed directly and the conclusion is deduced by linking to the database from the public authorized organizations. That makes it possible to evaluate the environmental grades accurately, but it is too slow and difficult for general users to operate and applied it into an electric motor unit(EMU). Therefore, in this research, the basic model was designed, which is based on construction of database structure of the software and organization of architecture, to develop an advanced software for EMU according to user and purpose of it by benchmarking of domestic and international softwares. The result of this study would be applied to develop the LCA software in the future.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.4
• /
• pp.527-538
• /
• 1996

The contents of articles on nutrition in life cycle, health and disease in the Korean daily newspapers were analyzed for the evaluation of the trends in nutrition information in mass media. Among 922 articles pressed from January 1960 to June 1996, articles on nutrition in life cycle were most frequently appeared, which is followed by articles on nutrition in disease, health foods and other related food and nutrition informations. There was a deep contrast in that the proportion of articles on nutrition in life clyle decreased from 58% in the 60's to 33% in the 90's, and those of nutrition in disease, and health foods increased from 23% and 5% in 60's to 34% and 18% in 90's, respectively.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.3
• /
• pp.105-113
• /
• 2023

The study used the whole-life carbon assessment method to conduct a thorough carbon-neutral evaluation of a standard steel structure. To further assess carbon emissions, 11 design-changed models were evaluated, with changes made to the span between beams and columns. The results of the carbon emission assessment showed savings of approximately 13.1% by implementing the stage of the beyond life cycle. Additionally, the evaluation of carbon emissions through design changes revealed a difference of up to 42.2%. These findings confirmed that recycling and structural design changes can significantly reduce carbon emissions by up to 48.6%, making it an effective means of achieving carbon neutrality. It is therefore necessary to apply the stage of beyond life cycle and structural change to reduce carbon emissions.

• Journal of Family Resource Management and Policy Review
• /
• v.15 no.2
• /
• pp.85-101
• /
• 2011

The purpose of this study is to ascertain the actual conditions of volunteering activities in respect to age-integrated leisure. This study is based on the 2010 Korea Leisure Life Survey. The participants in this study were 3015 people who reside in Korean cities, except for Jeju-do. Questionnaires from the 2010 Korea Leisure Life Survey were used for the final analysis. Data were analyzed through a descriptive analysis, Chi-Square test and ANOVA by SPSS WIN 17.0. The findings indicated that 18% of the participants participated in volunteer activities as leisure in the last one year. The major findings were as follows. First, demographic characteristics such as age, academic career, income, and marital status had a positive correlation with the degree of volunteer participation. Second, there were differences in duration and field of activities according to age. Third, though most of the non-volunteer reasons were 'lack of resources', there were different reasons based on age. In detail, the reason for 10-50 year-olds (economically active population) was 'lack of time', but the more than 60 year-olds was 'health concern'. Consequently, this access to the life cycle study shows the need to improve life satisfaction.

• International Journal of High-Rise Buildings
• /
• v.5 no.2
• /
• pp.71-86
• /
• 2016

This paper summarizes the results of a two-year-long research project conducted by the CTBUH on the life cycle assessment (LCA) of tall building structural systems. The research project was made possible thanks to a $300,000 contribution from ArcelorMittal and the support of some of the most important structural engineering firms and players in the tall building industry. The research analyzed all life phases of a tall building's structural system: the extraction and production of its materials, transportation to the site, construction operations, final demolition of the building, and the end-of-life of the materials. The impact of the building structure during the operational phase (i.e., impact on daily energy consumption, maintenance, and suitability to changes) was also investigated, but no significant impacts were identified during this phase.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.18-21
• /
• 2009

The life of components under high thermal load is typically shorter than other components. The turbopump turbine of liquid rocket is operated under these environments like high temperature and high centrifugal dorce due to high rotating velocity during operating time. These conditions may often cause low-cycle fatigue problem in the turbopump turbine. First of all, to analyze heat stress, ABAQUS/CAE is used and Coffin-manson's equation is used to consider elasticity and plasticity strain. S.W.T's method is used to consider the mean stress effect, using strain history, low-cycle fatigue analysis is done for turbopump turbine which may have FCL(fracture critical location). In this paper, strain life method is applied to analyze low-cycle fatigue.

• Plant Journal
• /
• v.15 no.2
• /
• pp.46-55
• /
• 2019

This paper presents a LNG Liquefaction cycle configuration using two stages of methane expansion (i.e. spliting into two stages as warm & cold to generate an additional inflection point within a cold composite curve) and a single stage of nitrogen expansion to improve the efficiency of the conventional Methane & Nitrogen Expansion Cycle. In comparison with Double Nitrogen Expansion Cycel and Methane & Nitrogen Expansion Cycle, the cycle efficiency has increased approximately from 13.92 and 13.13 to 12.08 kW/ton/day (8~15% efficiency increase). A Life Cycle Cost (LCC) analysis based on Net Present Value (NPV) also show an improvement in therms of project NPV, against a minor increment of a CAPEX.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.1
• /
• pp.18-23
• /
• 2018

In this study, low cyclic fatigue test was carried out at room temperature condition for rolled STS304 steel. The results of this study show that rolled STS304 steel has excellent static tensile strength and fatigue characteristics. The relationship between plastic strain range and fatigue life was examined using the triangular wave in order to predict the low cycle fatigue life of rolled STS304 steel by Coffin-Manson equation. Cyclic behavior of rolled STS304 steel was characterized by cyclic hardening with increasing number of cycle through the Hysteresis loop analysis and cyclic response of maximum stress versus number of cycles. It is found that the plastic deformation energy consumed per cycle is reduced by calculating the area of the hysteresis loop.