• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.153-153
• /
• 2010

The world is moving towards a post-carbon society and needs clean and renewable energy for sustainable development. There are many methodological approaches which are helping this shift based on analyzed data about energy resources and which focus on limited types of energy including liquid fossil, solid fossil, gaseous fossil, and biomass (e.g. IPCC Guidelines, ISO 14064-1, WRI Protocol, etc.). We should also consider environmental impact (e.g. greenhouse gas emissions, water use, etc.) and the economic cost of the renewable energy to make a better decision. Recently, researchers have addressed the environmental impact of new technologies which include photovoltaics, wind turbines, hydroelectric power, and biofuel. In this work, we analyze the environmental impact with a carbon emission factor to present a correlation between $CO_2$ emission and the cost of energy resources standardized by the energy output. In addition, we reviewed Life Cycle Assessment (LCA) as another methodology. Researchers who are studying energy systems have ignored the impacts of entire energy systems, e.g. the extraction and processing of fossil fuels. In power sector, the assessment should include extraction, processing, and transportation of fuels, building of power plants, production of electricity, and waste disposal. Therefore LCA could be more suitable tool for energy cost and environmental impact estimation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.1
• /
• pp.44-49
• /
• 2015

Ceiling cooling and heating system that consider load arrangement and space in the ceiling needs to be developed. Therefore, experimental and economic changes were done to verify the performance of compact type VAV. The test results were as follow. 1) Noise test result, measuring approximately 50.4 dB~56.6 dB (before ceiling in landfill), had a better ceiling deadline than the current measure, about a 10 dB noise reduction, so that the office baseline (40~50 dB) noise was judged to be less than test. 2) For the static pressure test result, taking out an outside hydrostatic 25 mmAq, 24.8 mmAq was measured, respectively, at the point. 3) For the life-cycle cost analysis result, the initial investment cost, maintenance replacement costs, and maintenance costs increased 0.2%, but the energy savings ratio was 19.5% while the whole life cycle savings of 40 years LCC was reduced 11.9%.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.4
• /
• pp.234-240
• /
• 2010

In October 2009, the Ministry of Land Transport and Maritime Affairs noticed 'Environment-friendly housing construction standards and performance' to build energy saving environment-friendly housings (Green Homes) for the reduction of energy consumption and carbon dioxide emission. In this study, the $CO_2$ emissions were evaluated during the life cycle of the existing apartments which were built in 1980's and Green Home apartment. $LCCO_2$ was evaluated by dividing the life cycle into three stages which are construction, maintenance and destruction stage. $CO_2$ emission from the materials for improving insulation performance was estimated by Input-output analysis. As a result, in 40 year-life cycle of $84\;m^2$ apartment, 400.68 T-$CO_2$ was emitted from 1980's apartment, on the other hand 231.02 T-$CO_2$ was emitted from Green Home apartment.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.543-547
• /
• 2007

화석연료의 점진적 고갈과 그 사용에 따른 지구온난화 그리고 에너지 안보를 해결하기 위하여 세계 각국에서는 대체에너지 개발에 노력을 기울이고 있다. 그 중 수소는 가장 주목받고 있는 대체에너지 원으로 현재 기술개발을 통하여 상업화 시기를 앞당기려고 하고 있다. 다시 말해서, 현재는 수소에너지 시대의 진입 시점이라고 할 수 있다. 이러한 수소는 다양한 소스에서 생산될 수 있으며, 수송연료로 연소 시, 유해 배출물이 거의 나오지 않는 장점이 있다. 그러나 수소는 그 생산 경로에 따라서, 다양한 환경성 및 경제성을 나타낼 수 있다. 본 연구에서는 국내 수소 생산 방식으로 개발/상업화 되어 있는 NGSR, Naphtha SR, WE에 대하여, LCA와 LCCA 방법을 통하여, 수소 경로 전반 즉, 원료채취에서부터 자동차로 주행하였을 때까지를 포함하여 각 대상 수소 경로의 환경성과 경제성을 평가하였다. LCA와 LCCA 결과를 살펴보면, Naphtha SR 및 NGSR 수소 경로에서는 지구온난화와 화석자원 소모 부문 모두 기존연료와 비교해보았을 때 개선효과가 뚜렷하게 나타났으나, WE 수소 경로에서는 오히려 환경부하가 증가되는 것으로 나타났다. 또한 비용적인 측면에서 살펴보면, 수소에 가솔린과 동일한 연료 세율을 부과하더라도 수소가 가솔린에 비하여 주행 시 연료 비용이 저감되어 연료로서 가격경쟁력을 확보하였으며, 연료세를 부과하지 않는 다면, Naphtha SR로 생산하여 유통한 수소가 수송연료로써 가장 비용 효율적인 것으로 나타났다.

• Earthquakes and Structures
• /
• v.9 no.1
• /
• pp.73-91
• /
• 2015

The effectiveness of tuned mass dampers (TMDs) in reducing the seismic response of civil structures is still a debated issue. The few studies regarding TMDs on inelastic structures indicate that they would perform well under moderate earthquake loading, when the structure remains linear or weakly nonlinear, while tending to fail under severe ground shaking, when the structure experiences strong nonlinearities. TMD seismic efficiency should be therefore rationally assessed by considering to which extent moderate and severe earthquakes respectively contribute to the expected cost of damages and losses over the lifespan of the structure. In this paper, a method for evaluating, in a life-cycle cost (LCC) perspective, the seismic effectiveness of TMDs on inelastic building structures is presented and exemplified on the SAC LA 9-storey steel moment-resisting frame benchmark building. Results show that the LCC concept may provide an appropriate alternative to traditional performance criteria for the evaluation of the effectiveness of TMDs and that TMD installation on typical existing middle-rise buildings in high seismic hazard regions may significantly reduce building lifetime cost despite the poor control performance observed under the most severe seismic events.

• Journal of Korea Spatial Information System Society
• /
• v.1 no.1 s.1
• /
• pp.79-88
• /
• 1999

In this paper, essential technological elements for applying GIS and GPS based AVL system to the logistics information area were reviewed. Then system alternatives were evaluated using Life-Cycle Cost Analysis. In the basic scenario, the roadside infrastructure alternative is turned out to be more efficient that the other. The sensitivity analysis shows that under the different conditions and unit costs, the wireless communication alternative can be more economical. Mixed approach based on characteristics of transportation facilities should be considered.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.2
• /
• pp.50-55
• /
• 2013

On a plan for the Winter Olympics 2018, Korean government is in the process of the world's first use of ocean energy for the Olympic ice-rink. This technology will be applied to a seaside town and have possibility of an export industry. In this study, we researched facilities and system for P ice-rink that acts as a cultural center as well as a physical plant in Busan and provided the way that apply by seawater heat source. Also, existing system and seawater heat source system of P ice-rink was analyzed by the most commonly used life cycle cost analysis among economics methods. Such economics data for ice-rink using seawater will be utilized by a basic information.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.7
• /
• pp.491-499
• /
• 2007

An architectural means of optimal daylight distribution is by using so-called light shelf systems, horizontal shading and redirecting devices. The overall performance of the daylighting system can be improved by the incorporation with electric lighting control devices. This paper aims to exemplify the benefit of daylighting in term of economic consideration. In such a case a reasonable technique to compare system costs is by life-cycle costing. Stated simply, a life-cycle cost represents the total cost of a system over its entire life cycle, that is, the sum of first cost and all future costs. Four different electric lighting system designs are proposed and a lighting control system that is continuously operating according to the level of daylight in the space has been adapted. The result shows clearly that although denser layout of lighting fixtures might be more effective to interface to the level of daylight ceaselessly changeable, its economic benefit may not meet the expected criterion the reason of increased initial investment and maintenance cost for the fixtures and control devices.

• Journal of Power System Engineering
• /
• v.22 no.1
• /
• pp.72-78
• /
• 2018

With growing concerns over air pollutions attributed to shipping activities, the international maritime organization has enacted a series of stringent regulations. In particular, MARPOL Annex IV Reg. 16 requires sulfur contents from exhaust gases of marine engines to be progressively reduced. To comply with this regulation, three feasible options have been introduced: using LNG as a marine fuel, using heavy fuel oil with the scrubber system, and using the marine gas oil (a type of low sulfur fuel oil). For the objectives of this paper, the holistic environmental impacts pertinent to these options were investigated and compared in ways that the flows of energy and emission were tracked and quantified through the life cycle of the ship. Research findings obtained from a case study with a large bulk carrier showed that the use of the scrubber system to purify heavy fuel oil would produce relatively fewer amounts of emissions attributing to global warming than other two options. On the other than, the use of LNG would be the way to operate the ship in a cleaner way in terms of reducing the acidification, eutrophication, and photochemical effects. Throughout the analysis, the excellence of life cycle assessment was proven to shift the environmental impact of marine systems from the short-term view to the long-term one.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.4
• /
• pp.185-195
• /
• 2001

Latex Modified Concrete(LMC) has been widely used for the pavement of highway bridges over the past 35years around the world since it is more resistant to the intrusion of chloride ions, has higher tensile, compressive, and flexural strength, and has greater freeze-thaw resistance. However, in Korea, it has not been introduced to fields due to higher initial construction cost for its overlay compared with that of conventional pavement materials. Due to durable characteristics, it should be noted that the LMC may be more cost-effective than conventional pavements such as asphalt pavement, when life-cycle cost(LCC) concept is considered. The objective of this study is intended to suggest a practical LCC analysis model for pavement projects and to demonstrate relative cost-effectiveness of the LMC overlays in comparison with conventional pavement techniques. It may be stated that the procedure proposed in this study may be utilized for making optimal decision on cost-effective pavement design.