• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.110-116
• /
• 1997

The tribological behaviour of WS$_2$ solid lubricant was investigated using a ball-on-disk type tester. The WS$_2$ powder was spray-coated at room temperature and the effects of specimen configuration, atmosphere, applied load and rotating spccd on the friction coefficient was examined. WS$_2$ coated ball and disk showed the lowest friction coefficient of 0.05 in the nitrogen atmosphere under 0.3 kgf and 100 rpm, whereas relatively high coefficient of 0.1 - 0.15 was observed in air atmosphere. This confirmed that the spray-coated WS$_2$ solid lubricant was effective in reducing the friction coefficient and improving wear life in nitrogen atmosphere.

• 한국생산제조학회지
• /
• 제26권3호
• /
• pp.299-305
• /
• 2017

Gate-lifting devices in small- to mid-sized sluice gates mostly employ the mechanical roller rack pinion (RRP) system. This RRP system, which consists of a rack-bar and a pinion, transforms a rotation motion into a linear one. The rack-bar has a series of roller trains that mesh with the pinion. In this study, we adopt an exact involute-trochoid tooth profile of the pinion to obtain a higher contact fatigue strength using the profile modification coefficient. Further, we determine the contact forces and investigate Hertz contact stresses to predict the pitting life of the pinion according to varying the shape design parameters. The results indicate that the design fatigue life of an RRP system for sluice gate can be achieved only when the design value of the profile modification coefficient reaches or exceeds a certain level.

• International Journal of Railway
• /
• 제4권4호
• /
• pp.86-92
• /
• 2011

Chloride ion diffusion at the corner of rectangular-shaped concrete structures is presented. At the corner of rectangular-shaped concrete, chloride ion diffusion is in two-dimensional process. Chloride ions accumulate from two orthogonal directions, so that corrosion-free life of concrete structures is significantly reduced. A numerical procedure based on finite element method is used to solve the two-dimensional diffusion process. Orthotropic property of diffusion coefficient of concrete is considered and chloride ion profile obtained from numerical analysis is used to produce transformed diffusion coefficient. Comparisons of experimental data are also carried out to show the reliability of proposed numerical analysis. As a result of two-dimensional chloride diffusion, corrosion-free life of concrete structure for railway is estimated using probability of corrosion initiation. In addition, monographs that produces transformed diffusion coefficient and corrosion-free life of concrete structure are made for maintenance purpose.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.95-101
• /
• 2012

An internal type roller ring gear(RRG) system composed of either a pin or a roller ring gear and its conjugated cam pinion can improve the gear endurance from that of a conventional gear system by reducing the sliding contact, while increasing the rolling motion. In this paper, we first proposed the exact cam gear profile and the self-intersection conditions obtained when the profile shift coefficient is introduced. Then, we investigated contact stresses and surface pitting life to fmd characteristics for surface fatigue by varying the shape design parameters. The results show that the pitting life can be extended significantly by increasing the profile shift coefficient.

• Plant Resources
• /
• 제5권2호
• /
• pp.118-123
• /
• 2002

In order to obtain the genetic information on the quantitative characters of black seeded soybeans, which would be needed to improve selection efficiency for breeding high yielding genotype, 45 varieties of black seeded soybeans collected in Chonnam, Korea were grown and variations of several important characters were observed. Heritability of each observed character, phenotypic and genotypic correlations among the characters and contribution of each yield component on grain yield through path coefficient analysis were estimated. Both number of pods per plant and 100-seed weight showed not only high heritability but also highly significant phenotypic and genotypic correlation with seed yield, and hence it was desirable to select plants with more number of pods per plant and higher 100-seed weight than raise seed yield of black seeded soybeans collected in Chonnam. In addition, number of pods per and 100-seed weight were proved to be the most influential variables on the viability of seed yield by path coefficient analysis. Since these showed the high heritability of number of pods per plant, selection of plants with higher 100-seed weight would be more efficient for breeding high yielding genotype.

• Journal of Biosystems Engineering
• /
• 제30권5호
• /
• pp.285-292
• /
• 2005

Extrusion process and physical properties of extrudates of pulp powder (TMP, thermomechanical pulp fibers) mixed with expanding additives was evaluated to develop biodegradable packaging materials. To find out the optimum condition, the status of extrusion process, coefficient of elastic and expansion ratio of extrudates were tested on the composites (wheat flour, soluble starch, polyvinyl alcohol), blending conditions of composites and moisture contents of extrudates. In case of material composition, wheat flour played a key role to keep extrusion process irrespective of the added amounts of soluble starch and polyvinyl alcohol. The coefficient of elastic of extrudates was increased and the expansion ratio was reduced as the added amounts of wheat flour increased. Also, the coefficient of elastic of extrudates was decreased as the moisture content of extrudates increased. The lowest coefficient of elastic was 439.55 kPa under the condition, of pulp powder mixed with $20\%$ of wheat flour based on pulp weight and $10\%$ of soluble starch based on wheat flour weight and controlled $20\%$(wb) of moisture content.

• 방사선산업학회지
• /
• 제17권1호
• /
• pp.111-118
• /
• 2023

The International Commission on Radiological Protection (ICRP) 103 recommends a cost-benefit analysis method as an auxiliary tool for scientific and rational decision-making for the principle of optimization of radiological protection. In order to conduct a cost-benefit analysis, the safety improvement of nuclear power by regulation must be measured and converted into monetary terms. The improvement of nuclear safety can be measured by reducing the radiation exposure dose of the people, and it is necessary to determine the coefficient to convert the radiation exposure dose into money. The monetary coefficient is calculated as the product of the statistical life value (VSL) and the nominal risk coefficient. In order to derive the monetary coefficient, the willingness to pay (WTP) can be estimated using the contingent valuation method (CVM), which quantifies the value of non-market goods by converting them into monetary units. WTP can be estimated based on the random utility model, which is the basic model for bivariate selection type conditional value measurement data. Statistical life value can be calculated using the estimated WTP and reduction in early mortality, and a monetary coefficient can be derived.

• 한국기계가공학회지
• /
• 제10권4호
• /
• pp.38-43
• /
• 2011

Industrial reducer is in general use to Deck Crane. High-precision and high-efficient reducer is minimized the power-loss and energy-loss of a machine. So it contribute the price reduction and life extension. Reducer is usually using the Planetary gear reducer. Planetary gear reducer is composed the sun gear, planet gear, internal gear and casing. Industrial reducer's wear and breakage have a short-life. To solve this problem, it is using the profile-shifted-gear or tooth modification. This study was carried out the effect of addendum modification coefficient on tooth fillet bending strength to planetary reducer. Tooth fillet bending stress is calculate. And all parameter were expressed the function of addendum modification coefficient. And then stress concentration factor of tooth fillet curve was express the function of addendum modification coefficient using comparison between theory and finite element analysis.

• 대한기계학회논문집A
• /
• 제35권2호
• /
• pp.157-162
• /
• 2011

발전설비 및 자동차의 엔진에서 고온과 응력이 발생하므로 안전을 위하여 제품을 생산하기 전에 재료의 수명설계가 필요하다. 본 연구에서는 온도, 응력, 파단 시간으로 이루어진 무기력계수를 이용하여 수명설계를 수식화하였다. 통합수명식을 이용하여 SP-Creep 시험 데이터와 계산된 데이터를 비교하였다. SP-Creep 시험은 X20CrMoV121강의 파단시간을 획득하기 위하여 수행하였고 수명설계식을 통해 하중, 온도, 하중-온도가 작용하는 3가지 경우를 고려하였다. 첫째로, 무기력계수는 SP-Creep 시험에서 획득한 파단응력과 시간에 의해 계산하였다. 두 번째로, 온도 조건을 주어 수명을 예상하였다. 세 번째로, 부재는 피로와 크리프가 동시에 작용할 때 커플링 효과 때문에 더 열악한 상태에 놓이게 된다. 수명은 커플링 효과 때문에 현저하게 감소하는 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권5호
• /
• pp.30-36
• /
• 2019

염해에 노출된 콘크리트 구조물의 내구수명을 정량적으로 평가하기 위해서는 사용 배합을 통하여 확산계수를 평가하고 이를 이용한 염화물 침투 해석이 필요하다. 본 연구에서는 비말대에 노출된 콘크리트 구조물에 대하여 촉진 확산계수를 NT BUILD 492 및 ASTM 1202를 통하여 평가하였으며, 기존의 연구를 이용하여 겉보기 확산계수를 도출하였다. 사용배합의 특성과 가장 보수적인 조건인 임계 염화물량과 표면 염화물량을 고려하였으며, Life 365 ver.2 프로그램을 이용하여 외벽 및 기둥구조의 내구수명을 평가하였다. 10년 및 15년의 Built-up period의 변화에 대해서는 내구수명은 큰 차이를 보이지 않았으며. 슬래그를 사용한 두 개의 배합에서는 높은 시간의존성 지수와 낮은 초기 염화물 확산계수로 인해 75년 이상의 높은 내구수명이 확보되었다.