• Geomechanics and Engineering
• /
• v.11 no.4
• /
• pp.457-469
• /
• 2016

Steep rock slope with water-filled tension crack will happen to overturn around the toe of the slope under seismic loading. This failure type is completely different from the common toppling failure occurring in anti-dipping layered rock mass slopes with steeply dipping discontinuities. This paper presents an analytical approach to determine the seismic factor of safety against overturning for an intact rock mass slope with water-filled tension crack considering horizontal and vertical seismic coefficients. This solution is a generalized explicit expression and is derived using the moment equilibrium approach. A numerical program based on discontinuous deformation analysis (DDA) is adopted to validate the analytical results. The parametric study is carried out to adequately investigate the effect of horizontal and vertical seismic coefficients on the overall stability against overturning for a saturated rock slope under two water pressure modes. The analytical results show that vertically upward seismic inertia force or/and second water pressure distribution mode will remarkably decrease the slope stability against overturning. Finally, several representative design charts of slopes also are presented for the practical application.

• Journal of Korean Medical classics
• /
• v.27 no.4
• /
• pp.15-20
• /
• 2014

Objectives : We search the contents about Bi disease in Huang Di Nei Jing(黃帝內經), to analyze the significance of Bi disease, etiopathogenisis and pathogenesis of Bi disease, treatment of Bi disease. Methods : We find that the key feature of Bi disease is joint pain induced by impatency of Qi and blood. Exterior and interior etiological factors are involved in, such as exogenous evil of cold and dampness, emotional disorders, intemperance of taking food, dysfunction of yingqi and weiqi, strong or weak constitution, etc. Results : The important pathogenesis are invaded by exogenous evil because of deficiency, disharmony of yingqi and weiqi and disharmony of five viscera. The key points of treatments are the individual concerned therapy and climate concerned therapy, selecting the acupoint according to the differentiation of symptoms and signs. Conclusions : The combined therapy should be used such as acupuncture and moxibustion, hot application of medicine, massage, Daoyin, outside apply, etc. These supply the theory foundation for etiological factor, pathogenesis, syndrome and treatment, and to direct the diagnosis and treatment of Bi disease later generations.

• Journal of Multimedia Information System
• /
• v.2 no.2
• /
• pp.233-240
• /
• 2015

Mobile devices are becoming increasingly sophisticated and the latest generation of smartphones now incorporates many diverse and powerful sensors. These sensors include acceleration sensor, magnetic field sensor, light sensor, proximity sensor, gyroscope sensor, pressure sensor, rotation vector sensor, gravity sensor and orientation sensor. The availability of these sensors in mass-marketed communication devices creates exciting new opportunities for data mining and data mining applications. In this paper, we describe and evaluate a system that uses phone-based accelerometers to perform activity recognition, a task which involves identifying the physical activity that a user is performing. To implement our system, we collected labeled accelerometer data from 10 users as they performed daily activities such as "phone detached", "idle", "walking", "running", and "jumping", and then aggregated this time series data into examples that summarize the user activity 5-minute intervals. We then used the resulting training data to induce a predictive model for activity recognition. This work is significant because the activity recognition model permits us to gain useful knowledge about the habits of millions of users-just by having them carry cell phones in their pockets.

• Journal of information and communication convergence engineering
• /
• v.15 no.1
• /
• pp.53-61
• /
• 2017

The preferred feature selection methods for text classification are filter-based. In a common filter-based feature selection scheme, unique scores are assigned to features; then, these features are sorted according to their scores. The last step is to add the top-N features to the feature set. In this paper, we propose an improved global feature selection scheme wherein its last step is modified to obtain a more representative feature set. The proposed method aims to improve the classification performance of global feature selection methods by creating a feature set representing all classes almost equally. For this purpose, a local feature selection method is used in the proposed method to label features according to their discriminative power on classes; these labels are used while producing the feature sets. Experimental results obtained using the well-known 20 Newsgroups and Reuters-21578 datasets with the k-nearest neighbor algorithm and a support vector machine indicate that the proposed method improves the classification performance in terms of a widely known metric ($F_1$).

• Smart Structures and Systems
• /
• v.13 no.6
• /
• pp.943-957
• /
• 2014

When subjected to fatigue loading, the main failure mode of partially prestressed concrete (PPC) structure is the fatigue fracture of tensile reinforcement. Therefore, monitoring and evaluation of the steel stresses/strains in the structure are essential issues for structural design and healthy assessment. The current study experimentally investigates the possibility of using fiber Bragg grating (FBG) sensors to measure the steel strains in PPC beams in the process of fatigue loading. Six full-scale post-tensioned PPC beams were exposed to fatigue loading. Within the beams, the FBG and resistance strain gauge (RSG) sensors were independently bonded onto the surface of tensile reinforcements. A good agreement was found between the recorded results from the two different sensors. Moreover, FBG sensors show relatively good resistance to fatigue loading compared with RSG sensors, indicating that FBG sensors possess the capability for long-term health monitoring of the tensile reinforcement in PPC structures. Apart from the above findings, it can also be found that during the fatigue loading, there is stress redistribution between prestressed and non-prestressed reinforcements, and the residual strain emerges in the non-prestressed reinforcement. This phenomenon can bring about an increase of the steel stress in the non-prestressed reinforcement.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.811-818
• /
• 2020

Y-containing CLAM steels were melted via vacuum induction melting and electroslag remelting. In this study, the evolution, microstructure, and mechanical properties of the alloy inclusions (ESR-1 (0 wt.% Y), ESR-2 (0.016 wt.% Y) and ESR-3 (0.042 wt.% Y)) were investigated. Further, the number of inclusions in ESRed steel was observed to obviously decrease, and the distributions were more uniform. The fine Y-Al-O inclusions (1-2 ㎛) were the main inclusions in ESR-2. The addition of Y affected the prior austenite grain size (PAGZ), increasing the tensile strength at test temperature. Low ductile-brittle transition temperature (DBTT) was obtained because of the fine PAGZ and dispersive inclusions. For the ESRed CLAM steel with 0.016 wt.% Y, the yield strengths were 621 MPa at 20 ℃ and 354 MPa at 600 ℃ in air. Further, the uniform elongation and elongation of the ESR-2 alloy were 5.5% and 20.1% at 20 ℃, respectively. Meanwhile, the DBTT tested using full-size Charpy impact specimen (55 cm × 10 cm × 10 cm) was reduced to -83 ℃.

• Journal of the Korean housing association
• /
• v.21 no.1
• /
• pp.11-21
• /
• 2010

The house of the China Korean ethnic group in the countryside, kitchen is one of the most important rooms, which works for cooking, warming, and storage. Besides, it has some complementary functions such as washing and showering. The spatial structure of the kitchen is divided into three types, 'jeongji', 'walkway' and 'independent' one. Those houses which are near Korea peninsula mainly belong to the 'jeongji' type; whereas those houses which are in the inland of Jilin, Heilongjiang and Liaoning Provinces mainly are 'walkway' and 'independent' types. The main constituents of the kitchen include pots and pans, water supply and sewerage, fuel and storage etc. The differences among these constituents lead to the geographic differences in the aspect of cooking method and dietary culture, and finally the different kitchen spatial characters are manifested.

• The Pure and Applied Mathematics
• /
• v.11 no.4
• /
• pp.293-308
• /
• 2004

Let K be a nonempty convex subset of an arbitrary Banach space X and $T\;:\;K\;{\rightarrow}\;K$ be a uniformly continuous strictly hemi-contractive operator with bounded range. We prove that certain Ishikawa iteration scheme with errors both converges strongly to a unique fixed point of T and is almost T-stable on K. We also establish similar convergence and almost stability results for strictly hemi-contractive operator $T\;:\;K\;{\rightarrow}\;K$, where K is a nonempty convex subset of arbitrary uniformly smooth Banach space X. The convergence results presented in this paper extend, improve and unify the corresponding results in Chang [1], Chang, Cho, Lee & Kang [2], Chidume [3, 4, 5, 6, 7, 8], Chidume & Osilike [9, 10, 11, 12], Liu [19], Schu [25], Tan & Xu [26], Xu [28], Zhou [29], Zhou & Jia [30] and others.

• Wind and Structures
• /
• v.22 no.3
• /
• pp.349-368
• /
• 2016

A preconditioning technique is presented for a simultaneous solution to wind-membrane interaction. In the simultaneous equations, a linear elastic model was employed to deal with the fluid-structure data transfer at the interface. A Lagrange multiplier was introduced to impose the specified boundary conditions at the interface and strongly coupled simultaneous equations are derived after space and time discretization. An initial linear elastic model preconditioner and modified one were derived by treating the linearized elastic model equation as a saddle point problem, respectively. Accordingly, initial and modified fluid-structure interaction (FSI) preconditioner for the simultaneous equations were derived based on the initial and modified linear elastic model preconditioners, respectively. Wind-membrane interaction analysis by the proposed preconditioners, for two and three dimensional membranous structures respectively, was performed. Comparison was made between the performance of initial and modified preconditioners by comparing parameters such as iteration numbers, relative residuals and convergence in FSI computation. The results show that the proposed preconditioning technique greatly improves calculation accuracy and efficiency. The priority of the modified FSI preconditioner is verified. The proposed preconditioning technique provides an efficient solution procedure and paves the way for practical application of simultaneous solution for wind-structure interaction computation.

• Journal of Ship and Ocean Technology
• /
• v.10 no.3
• /
• pp.36-48
• /
• 2006

The train ferry, accommodating trains roll on and off, is often called as 'Railway on the Sea' or 'Blue High-way' since she can connect the railways or roads segregated by the sea and improve the accessibility and continuity of land transport systems. The ferry is especially appropriate to the intermodal transport routes mostly passing through the land but have relatively short sea segment. As the train ferry can considerably reduce the cost and time for cargo handling and modal shift and unnecessitates excessive initial investment on infrastructures such as large harbor cranes or vast container yards, introduction of train Ro-Ro ferries lessen the total transport cost for door-to-door transportation with full exploitation of the existing railway system. All the ports placed in Shandong, Liaoning and Jiangsu provinces of China are connected to the hinterlands via well developed railway and road systems. Therefore, realization of the Incheon-Yantai train ferry system will link Korea railways to TCR and the 4,131-kilometer-long Longhai-Lanxin Railway, along the famous Eurasian Continental Bridge. In the present paper, the Incheon-Yantai train ferry will be introduced as a good example of an efficient multimodal short sea shipping system for Northeast Asia.