• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.341-345
• /
• 2012

[Li0.055(K0.5Na0.5)0.945](Nb1-xTax)O3 (0.05 ≤ x ≤ 0.25) ceramics were prepared by the partial sol-gel (PSG) method to improve the microstructure homogeneity of Ta5+ ion and were compared to those prepared by the conventional mixed oxide (CMO) method. For the PSG method, Ta(OC2H5)5 was directly reacted with calcined [Li0.055(K0.5Na0.5)0.945]NbO3 powders and the specimens sintered at 1100 ℃ for 5 hrs showed a single phase with a perovskite structure. Compared to the specimens prepared by conventional mixed oxide powders, the relative ratio of tetragonal phase to orthorhombic phase of the sintered specimens prepared by Ta(OC2H5)5 was larger than that of the sintered specimens prepared by Ta2O5. The electromechanical coupling factor (kp), piezoelectric constant (d33) and dielectric constant (εr) of the sintered specimens were increased with Ta5+ content. These results could be attributed to the decrease of the orthorhombic-tetragonal polymorphic phase transition temperature (To-t), which could be evaluated by oxygen octahedral distortion. Strain of the sintered specimens prepared by the PSG method was higher than that of specimens prepared by the CMO method due to the increase of relative density. The effects of crystal structure on the strain characteristics of the specimens were also discussed.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.108-114
• /
• 1999

Surface acoustic wave (SAW) device is very attractive for gas sensor applications because of their small size, low cost, high sensitivity, and good reliability. A dual delay line surface acoustic wave $NO_2$ gas sensors have been designed and fabricated on the $LiTaO_3$ piezoelectric single crystal substrate. The capacitance of the fabricated IDTs was 326.34pF at the frequency of 79.3MHz. The maximum reflection loss of the impedence-matched IDTs was -16.74dB at the frequency of 79.3MHz. The SAW oscillator was constructed and the stable oscillation was obtained by controlling the gain of rf amplifier properly. The oscillation frequency shift of the SAW oscillator to the $NO_2$ gas was 28Hz/ppm.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.2086-2092
• /
• 2014

Two novel coordination compounds $[Cu_2(pypya)_3(H_2O)_2]{\cdot}Cl{\cdot}(H_2O)_5$ (1) and $\{[Cd(pypya)(ta)_{1/2}]{\cdot}H_2O\}_n$ (2) (Hpypya=2-(3-(pyridin-2-yl)-1H-pyrazol-1-yl)acetic acid, $H_2ta$=terephthalic acid) were synthesized and characterized by single X-ray diffraction. Structure determination reveals that complex 1 and complex 2 crystallize in the triclinic system, with the P-1 space group. The asymmetric unit of 1 contains two Cu(II) ions, and their coordination modes are different. These units of complex 1 are linked together via hydrogen bonds and ${\pi}-{\pi}$ interactions, and the 3D structure of complex 1 was formed. Complex 2, a mononuclear Cd(II) coordination compound, has a 2D structure which was constructed via coordination bonds. TGA and fluorescence spectra analysis of complex 1 and complex 2 have also been studied. In addition, the geometry parameters of complex 1 have been optimized with the B3LYP method of density functional theory (DFT) to explain its coordination behavior. The electronic properties of the complex 1 and ligand Hpypya have been investigated based on the nature bond orbital (NBO) analysis at the B3LYP level of theory. The result verifies that the synergistic effect have occurred in the compound.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.201-204
• /
• 2001

Rosen형 또는 적층 Rosen형과 같은 압전세라믹 변압기는 고전압, 고효율의 출력특성과 소형이라는 장점을 가지는 반면에, 온도에 따른 압전 특성의 변화가 심하다는 단점을 가진다. 이러한 이유로 압전 단결정과 같은 온도특성이 안정적인 재료를 이용한 변압기의 개발이 진 행되고 있다. 따라서, 본 연구에서는 온도계수가 낮은 $LiTaO_3$ 단 결정$(X-112^\circ\;Y)$을 이용한 압전변압기를 제작 그 특성을 시뮬레이션 및 실험으로 해석하였다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1047-1057
• /
• 2003

A sub-nanometer resolution Scanning Nonlinear Dielectric Microscope (SNDM) was developed for observing ferroelectric polarization. We also demonstrate that the resolution of SNDM is higher than that of a conventional piezo-response imaging. Secondly, we report new SNDM technique detecting higher nonlinear dielectric constants $\varepsilon$$\_$3333/ and $\varepsilon$$\_$33333/. Higher order nonlinear dielectric imaging provides higher lateral and depth resolution. Finally, the formation of artificial small inverted domain is reported to demonstrate that SNDM system is very useful as a nano-domain engineering tool. The nano-size domain dots were successfully formed in LiTaO$_3$ single crystal. This means that we can obtain a very high density ferroelectric data storage with the density above 1T-bits/inch$^2$.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.89-94
• /
• 1997

A new type SO$_2$ gas sensor with a particular inorganic thin film on SAW devices was developed. The sensor consisted of twin SAW oscillators of the center frequency of 54 MHz fabricated on the LiTaO$_3$ piezoelectric single crystal. One delay line of the sensor was coated with a CdS thin film that selectively adsorbed and desorbed SO$_2$, while the other was uncoated for use as a stable reference. Deposition of the CdS thin film was carried out by the spray pyrolysis method using an ultrasonic nozzle. The sensor could measure the concentration in air less than 0.25 parts per million of SO$_2$. Stability of the sensor turned out to be as good as less than 20ppm, recovery time after each measurement was as short as 5 minutes. Repeatability of the measurement was confirmed through so many reiterated experiments. Hence, the SAW sensor developed through this work showed promising performance as a microsensing tool of SO$_2$. Further work required to improve the performance of the sensor includes enhancement of the reactivity of the CdS thin film with SO$_2$ through appropriate dopant addition, an increase of the center frequency of the SAW device.