• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.39-39
• /
• 2003

텅스텐브론즈 세라믹스의 결정구조는 산소 팔면체를 뼈대로 각각 다른 형태의 A, C, B 양이온 자리로 이루어져 있다. A, C의 양이온 자리는 알카리 이온 또는 알카리 토금속 이온으로 채워지며, B 자리는 Nb 또는 Ta 이온으로 채워지게 된다. 이 중 A와 C 자리가 채워지는 정도로 unfilled, filled, completely filled 텅스텐브론즈로 나누어지게 된다. completely filled 텅스텐브론즈의 대표적인 물질인 $K_3Li_2Nb_5O_{15}$(KLN)는 전광특성, 비선형 광학특성으로 인하여 다양한 광소자로의 응용과 압전 특성, 초전 특성을 이용한 압전 소자로의 응용이 가능한 재료로 보고되고 있다. 하지만 이러한 꽉 찬 결정구조로 인하여 KLN의 경우 한정된 고용영역을 가지고 있어 물리적 성질의 변화가 제한되어 있는데, 이를 극복하기 위한 여러 가지 시도가 있었다. 이 중 A 자리와 C 자리를 치환하는 연구는 많이 알려져 있으나 치환시 빈 자리를 수반하는 경우가 대부분이다. 반면, B 자리를 치환하는 연구는 Nb를 Ta로 치환하는 경우가 알려져 있는데 이 경우 결정내에 빈자리가 생성되지 않는다. 이들 연구는 모두 단결정의 경우에 국한되어 있으며 단결정 제조시에는 조성을 정확히 조정하기 어렵고, 냉각시 crack이 발생하는 등의 문제를 가지고 있어 그 응용이 제한되고 있다. 따라서 본 연구에서는 KLN 다결정 세라믹스에서 Nb를 Ta으로 치환하여 치환에 따른 상변화와 치밀화 거동, 그리고 이에 따른 전기적 특성을 조사하여 이들 간의 상관관계를 조사하였다.

• Journal of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.293-301
• /
• 1984

-ray fluorescence analysis of $Ta_2O_5$, $Nb_2O_5$ and $ZrO_2$ in tin-slag samples using the simple dilution method was studied. The method is to correct mathematically the calibration curve to the linear line by the dilution. One synthesized standard having similar composition to the sample and tin slag samples were diluted with anhydrous $Li_2B_4O_7$ at the level of 1%, 2% and 3% of the sample content respectively. The diluted samples were fused at $1150^{\circ}C$ for 30 minutes and these glass beads were finely ground and pelletized. Measuring the X-ray intensities with these pellets, analytical results were calculated by the equation derived from J. Scherman's equation for the characteristic X-ray intensity of an element. Analytical results agreed with the reference values obtained by the standard calibration method within allowable error range and were reproducible.

• Journal of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.302-308
• /
• 1984

X-ray spectrometric determination of $Ta_2O_54, $Nb_2O_5$ and $ZrO_2$ in tin-slag samples using the double dilution technique was conducted. Tin-slag samples and one synthesized standard sample having similar composition to the samples were diluted with anhydrous $Li_2B_4O_7$ at the level of 1.00, 2.00 and 3.00% of the sample content, respectively. The diluted samples were fused at $1,150^{\circ}C$ for 30 minutes, and these glass beads were finely ground and pelletized. With the X-ray intensities measured, analytical results were calculated by the double dilution equation. The results agreed to the reference values obtained by the standard calibration method and the simple dilution technique within allowable error range and were reproducible.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.40-43
• /
• 1996

Substrates of SAW filter are mainly single crystal such as LiNbO$_3$, LiTaO$_3$. However, fabrication of crystal is difficult and cost is very high. In this study, crystal was substituted for piezoelectric ceramics which has simple fabrication process. The same SAW filter mask was photolithographed on crystal(LiNbO$_3$) substrate and ceramic(PZT4, PZT5A and PZT8) substrate in order to compare experimental value with theoretical value. The difference of center frequency was only 3.7%. PZT8 showed good bandwidth properties. It is considered that PZT8 has higher mechanical quality factor and propagation velocity than PZT4, PTT5A.

• Electrical & Electronic Materials
• /
• v.10 no.1
• /
• pp.1-7
• /
• 1997

SAW filter has been used in mobile communication device, bandpass filter and resonator for merits )f miniaturization and high reliability. Materials for substrate mainly used single crystal such as LiNbO$_{3}$, LiTaO$_{3}$, ZnO. In this study, it was attempted that LiNbO$_{3}$ was substituted for piezoelectric ceramics(PZT4, PZT5A and PZT8) which had simple fabrication process because fabrication of crystal is difficult and it's cost is high. SAW filters were fabricated by the photolithography on piezoelectric ceramics substrates in order to compare their characteristics with LiNbO$_{3}$'s. The experimental value of center frequency was compared with theoretical one. The average difference of center frequency was 3.7%. PZT8 showed the best bandwidth properties among them. It is considered that PZT8 has higher mechanical quality factor and propagation velocity than others.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.11a
• /
• pp.32-32
• /
• 2003

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2002.05a
• /
• pp.55-55
• /
• 2002

• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.530-534
• /
• 2017

The figures of merit in the on-resonance and off-resonance conditions ($FOM_{on}$ and $FOM_{off}$) for the piezoelectric energy harvester (PEH) were measured and compared in $[(K_{0.485}Na_{0.515})_{1-X}Li_X](Nb_{0.99}Ta_{0.01})O_3$ (x = 0.04 ~ 0.09) (KNLNT) ceramics with various Li contents. The crystal structure of CuO-doped KNLNT ceramics changes from orthorhombic to tetragonal around the Li fraction of 0.065. The stable temperature range for the tetragonal phase widens to both higher and lower temperatures as Li is substituted. The piezoelectric charge constant ($d_{33}$), electromechanical coupling factor ($k_p$) and mechanical quality factor ($Q_m$) have maximum values at the Li fraction between 0.055 and 0.065 where the phase boundary lies between the orthorhombic and tetragonal phases. Both $FOM_{on}$ and $FOM_{off}$ have peak values around the phase boundary but the peak compositions are not exactly coincided. The optimal Li fraction in the KNLNT ceramic for a PEH application was found to be between 0.055 and 0.065.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.1
• /
• pp.29-32
• /
• 2012

Lead-free $0.98(Na_{0.5},K_{0.5})NbO_3-0.02Li(Sb_{0.17}Ti_{0.83})O_3$ (hereafter 0.98NKN-0.02LST) ceramics doped with $Ag_2O$ were prepared using a conventional mixed oxide method. The specimen showed superior structural and electrical properties when 1 mol% $Ag_2O$ was doped. For the 0.98NKN-0.02LST+1.0mol%$Ag_2O$ ceramics sintered at $1,100^{\circ}C$, piezoelectric constant ($d_{33}$) of sample showed the optimum values of 207 pC/N. The 0.98NKN-0.02LST+1.0 mol%$Ag_2O$ ceramics are a promising candidate for lead-free piezoelectric materials.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.136.1-136
• /
• 1998