• 한국자기학회지
• /
• 제14권6호
• /
• pp.219-223
• /
• 2004

L $i_{0.5}$F $e_{2.5-{\chi}}$Rhx $O_4$($\chi$= 0.25, 0.50, 0.75, 1.00)을 직접합성법으로 제조하고, 시료의 조성비에 따른 자기적 성질과 결정학적 구조를 연구하였다. x선 회절실험분석 결과 시료 모두 공간군 Fd3m에 해당하는 입방 스피넬구조를 가졌고, Rh을 치환함에 따라 Li이온이 팔면체 자리에서 사면체 자리로의 이동이 나타났다. 시료의 격자상수는 Rh을 치환함에 따라 8.3365 $\AA$에서 8.3932 $\AA$으로 증가하였다. Neel 온도 이하에서 외부자기장을 가하지 않은 상태에서의 뫼스바우어 스펙트림과 외부자기장 (6 T)을 인가한 뫼스바우머 스펙트럼을 여러 온도에 대하여 취하여 미시적 자성구조를 측정하였다. 외부자기장하의 뫼스바우어 스펙트럼 분석으로 각 시료의 정확한 면적비를 계산하여 수행한 Debye온도 분석결과 전체 시료에서 사면체와 팔면체 자리가 비슷한 정도의 결합 세기를 가졌음을 알았다. $\chi$=0.75의 경우는 외부자기장하에서 사면체와 팔면체 자리의 초미세 자기장의 부호가 바뀌는 것을 알았고, 이는 Li ion의 자리이동과 일치하는 결과를 보인다 4.2K에서 극저온 하에서 6 T를 인가한 외부자기장의 스펙트럼분석으로 전체 시료의 자기적 스핀구조가 collinear spin 모형을 따름을 알 수 있었다.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.341-345
• /
• 2012

[Li0.055(K0.5Na0.5)0.945](Nb1-xTax)O3 (0.05 ≤ x ≤ 0.25) ceramics were prepared by the partial sol-gel (PSG) method to improve the microstructure homogeneity of Ta5+ ion and were compared to those prepared by the conventional mixed oxide (CMO) method. For the PSG method, Ta(OC2H5)5 was directly reacted with calcined [Li0.055(K0.5Na0.5)0.945]NbO3 powders and the specimens sintered at 1100 ℃ for 5 hrs showed a single phase with a perovskite structure. Compared to the specimens prepared by conventional mixed oxide powders, the relative ratio of tetragonal phase to orthorhombic phase of the sintered specimens prepared by Ta(OC2H5)5 was larger than that of the sintered specimens prepared by Ta2O5. The electromechanical coupling factor (kp), piezoelectric constant (d33) and dielectric constant (εr) of the sintered specimens were increased with Ta5+ content. These results could be attributed to the decrease of the orthorhombic-tetragonal polymorphic phase transition temperature (To-t), which could be evaluated by oxygen octahedral distortion. Strain of the sintered specimens prepared by the PSG method was higher than that of specimens prepared by the CMO method due to the increase of relative density. The effects of crystal structure on the strain characteristics of the specimens were also discussed.

• 한국전기전자재료학회논문지
• /
• 제25권9호
• /
• pp.692-701
• /
• 2012

Recently, many lead-free piezoelectric materials have been investigated for the replacement of existing Pb-based piezoelectric ceramics because of globally increasing environmental interest. There has been remarkable improvement in piezoelectric properties of some lead-free ceramics such as $(Bi,Na)TiO_3-(Bi,K)TiO_3-BaTiO_3$, $(Na,K)NbO_3-LiSbO_3$, and so on. However, no one still has comparable piezoelectric properties to lead-based materials. Therefore, new lead-free piezoelectric ceramics are required. $BiFeO_3$ has a rhombohedrally distorted perovskite structure at room temperature and a very high Curie temperature ($T_C$= 1,100 K). And a very large electric polarization of 50 ~ 60 ${\mu}C/cm^2$ has been reported both in epitaxial thin film and single crystal $BiFeO_3$. Therefore, a high piezoelectric effect is expected also in a $BiFeO_3$ ceramics. The recent research activities on $BiFeO_3$ or $BiFeO_3$-based solid solutions are reviewed in this article.

• 한국재료학회지
• /
• 제11권1호
• /
• pp.39-43
• /
• 2001

Nanocrystalline Fe-Sm-O thin films were prepared by RF magnetron reactive sputtering method in $Ar+O_2$mixed atmosphere with the $O_2$content of 5%. The compositions of the thin films were changed by changing the number of $Sm_2O_3$ chips. The best soft magnetic properties of the thin film with the composition of $Fe_{83.4}Sm_{3.4}O_{13.2}$ were saturation flux density of 18 kG, coercivity of 0.82 Oe and effective permeability about 2,600 at 0.5~100 MHz, respectively. The electrical resistivity of Fe-Sm-O thin films was increased with increasing the amount of Sm and O elements which combined each other, the electrical resistivity of$Fe_{83.4}Sm_{3.4}O_{13.2}$ thin film was $130{\mu}{\Omega}cm$. In case of the small amount of Sm and O elements, the microstructures of Fe-Sm-O thin films showed a precipitated phase of $Sm_2O_3$ on the ${\alpha}-Fe$ phase. With the increase of the amount of Sm and O elements, the microstructures of the Fe- Sm-O thin films were changed into a mixed structure of ${\alpha}-Fe$ crystal-phase and Sm-oxide amorphous phase. The Fe-Sm-O thin films with Fe content in the range of 72~94 at% exhibited the quality factor (Q = $\mu$′/$\mu$") of 7~75 up to 50 MHz.

• 한국세라믹학회지
• /
• 제40권11호
• /
• pp.1047-1057
• /
• 2003

A sub-nanometer resolution Scanning Nonlinear Dielectric Microscope (SNDM) was developed for observing ferroelectric polarization. We also demonstrate that the resolution of SNDM is higher than that of a conventional piezo-response imaging. Secondly, we report new SNDM technique detecting higher nonlinear dielectric constants $\varepsilon$$\_$3333/ and $\varepsilon$$\_$33333/. Higher order nonlinear dielectric imaging provides higher lateral and depth resolution. Finally, the formation of artificial small inverted domain is reported to demonstrate that SNDM system is very useful as a nano-domain engineering tool. The nano-size domain dots were successfully formed in LiTaO$_3$ single crystal. This means that we can obtain a very high density ferroelectric data storage with the density above 1T-bits/inch$^2$.

• 한국결정학회지
• /
• 제16권1호
• /
• pp.43-53
• /
• 2005

알칸화합물(alkanes)에서 탄소-수소결합을 활성화시켜서 더욱 값이 비싸고 더 유용한 알켄화합물(alkenes)로 만들 수 있는 촉매를 만들고자 지난 수 십 년간 많은 화학자들이 연구해왔다 이러한 목적의 하나로서 두개의 수소를 가지는 이리디움 P-C-P핀서(pincer) 착물 $(IrH_2{C_6H_3-2,6-(CH_2PBu_2^t)_2})$을 성공적으로 합성하였다. 이 착물은 알칸의 탈수소화반응(dehyrogenation)에 아주 효과적인 촉매로 알려졌다 알칸의 탈수소화반응에 촉매독으로 작용하는 질소, 물, 이산화탄소 및 일산화탄소와 같은 작은 화합물들과 직접 반응시켜서 어떻게 촉매독으로 작용하는지를 알아봤다. 촉매독으로 작용할 수 있는 화합물들을 합성하여 핵자기공명분광법(NMR)과 적외선분광법(IR)으로 확인하였고 분자구조를 알아보기 위해서 단결정X-ray 회절법을 통하여 확인하였다. 본 논문에서는 촉매 및 촉매독물질의 합성과 분자구조와 각각의 화합물의 반응성과 특이성을 알아보았다.

• 한국세라믹학회지
• /
• 제54권2호
• /
• pp.96-101
• /
• 2017

In this article, pure $m-LaVO_4:Eu^{3+}$ and $t-LaVO_4:Eu^{3+}$ nanocrystals were prepared by an EG-assisted hydrothermal method with regular shapes. A series of controlled experiments showed that the pH value of a mixed solution, the volume ratio of $EG/H_2O$ and the dosage of the doped $Eu^{3+}$ all had an important effect on the sizes and shapes of the final products. Furthermore, the constitutional unit of the products changed from 0D to 2D with an increase in the EG dosage. The PL results showed that $t-LaVO_4$ doped with $Eu^{3+}$ ions had better luminescence properties than $m-LaVO_4$ due to its special structure. All of these results not only expand our understanding of the luminescence properties of lanthanide orthovanadates, but they also elucidate the principles of the crystal growth.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2726-2732
• /
• 2014

The promoting effect of rhodium on the structure and activity of the supported Cu-Co based catalysts for CO hydrogenation was investigated in detail. The samples were characterized by DRIFTS, $N_2$-adsorption, XRD, $H_2$-TPR, $H_2$-TPD and XPS. The results indicated that the introduction of rhodium to Cu-Co catalysts resulted in modification of metal dispersion, reducibility and crystal structure. DRIFTS results of CO hydrogenation at reaction condition (P=2 MPa, $T=260^{\circ}C$) indicated the addition of 1 wt % rhodium improved hydrogenation ability of Cu-Co catalysts. The ethanol selectivity and CO conversion were both improved by 1 wt % Rh promoted Cu-Co based catalysts. The alcohol distribution over un-promoted and rhodium promoted Cu-Co based catalysts obeys A-S-F rule and higher chain growth probability was got on rhodium promoted catalyst.