• 제목/요약/키워드: LiF:Mg,Cu,Si

검색결과 26건 처리시간 0.03초

ANALYSIS OF THE LiF:Mg,Cu,Si TL AND THE LiF:Mg,Cu,P TL GLOW CURVES BY USING GENERAL APPROXIMATION PLUS MODEL

  • Chang, In-Su;Lee, Jung-Il;Kim, Jang-Lyul;Oh, Mi-Ae;Chung, Ki-Soo
    • Journal of Radiation Protection and Research
    • /
    • 제34권4호
    • /
    • pp.155-164
    • /
    • 2009
  • In this paper, we used computerized glow curve deconvolution (CGCD) software with several models for the simulation of a TL glow curve which was used for analysis. By using the general approximation plus model, parameters values of the glow curve were analyzed and compared with the other models parameters (general approximation, mixed order kinetics, general order kinetics). The LiF:Mg,Cu,Si and the LiF:Mg,Cu,P material were used for the glow curve analysis. And we based on figure of merits (FOM) which was the goodness of the fitting that was monitored through the value between analysis model and TLD materials. The ideal value of FOM is 0 which represents a perfect fit. The main glow peak makes the most effect of radiation dose assessment of TLD materials. The main peak of the LiF:Mg,Cu,Si materials has a intensity rate 80.76% of the whole TL glow intensity, and that of LiF:Mg,Cu,P materials has a intensity rate 68.07% of the whole TL glow intensity. The activation energy of LiF:Mg,Cu,Si was analyzed as 2.39 eV by result of the general approximation plus(GAP) model. In the case of mixed order kinetics (MOK), the activation energy was analyzed as 2.29 eV. The activation energy was analyzed as 2.38 eV by the general order kinetics (GOK) model. In the case of LiF:Mg,Cu,P TLD, the activation energy was analyzed as 2.39 eV by result of the GAP model. In the case of MOK, the activation energy was analyzed as 2.55 eV. The activation energy was analyzed as 2.51 eV by the GOK model. The R value means different ratio of retrapping-recombination. The R value of LiF:Mg,Cu,Si TLD main peak analyzed as $1.12\times10^{-6}$ and $\alpha$ value analyzed as $1.0\times10^{-3}$. The R of LiF:Mg,Cu,P TLD analyzed as $7.91\times10^{-4}$, the $\alpha$ value means different ratio of initial thermally trapped electron density-initial trapped electron density (include thermally disconnected trap electrons density). The $\alpha$ value was analyzed as $9.17\times10^{-1}$ which was the difference from LiF:Mg,Cu,Si TLD. The deep trap electron density of LiF:Mg,Cu,Si was higher than the deep trap electron density of LiF:Mg,Cu,P.

LiF(Mg, Cu, Na, Si) 열형광선량계를 사용한 $^{60}Co\;{\gamma}^-$선의 수중 흡수선량 측정 (LiF(Mg, Cu, Na, Si) Thermoluminescent Dosimeters for In-phantom Dosimetry of $^{60}Co\;{\gamma}$-rays)

  • 김현자;정운혁;이우교;도시홍
    • Journal of Radiation Protection and Research
    • /
    • 제15권2호
    • /
    • pp.57-65
    • /
    • 1990
  • 새로 개발한 LiF(Mg, Cu, Na, Si) 열형광선량계를 사용하여 $^{60}Co$ 원격조사장치에 의한 수중흡수선량을 측정하였다. 공기중 조사선량으로 부터 TLD 공동의 흡수선량 교정인자($D_{TLD}$/TL)를 결정하였고, 수중흡수선량은 TLD 공동의 흡수선량을 측정하여 공동이론에 의해 해석하였다. $10{\times}10cm^2$$5{\times}10cm^2$의 빔 크기에서 팬텀내 여러지점에 대하여 LiF(Mg, Cu, Na, Si) TLD로 수중흡수선량을 결정하고 동일한 위치에서 NE 2561 전리함을 사용하여 측정한 값과 비교한 결과, LiF(Mg, Cu, Na, Si) TLD의 측정오차$({\pm}3%)$ 범위내에서 잘 일치 하였다. 빔의 크기가 $5{\times}5cm^2$, $10{\times}10cm^2$$30{\times}30cm^2$인 경우에 깊이-선량 백분율과 팬텀-공기 선량비를 측정하였으며 이 값들은 British Journal of Radiology(1983)의 데이터와 잘 일치하였다.

  • PDF

LiF:Mg,Cu,Na,Si Teflon TLD의 열처리 특성 (Anneal Characteristics of LiF:Mg,Cu,Na,Si Teflon TLDs)

  • 남영미;정운혁;이대원;김현자;김기동
    • Journal of Radiation Protection and Research
    • /
    • 제22권3호
    • /
    • pp.135-141
    • /
    • 1997
  • 열처리 특성의 연구는 열형광선량계를 재 사용하는데 있어서 중요하다. 최근 개발된 디스크 형태 (직경 4.5 mm, 두께 약 $90mg/cm^2$)의 LiF:Mg,Cu,Na,Si Teflon TLD의 열처리 조건을 구하기 위하여 조사전열처리, 판독과정 및 판독 후 열처리의 순서로 연구하였다. Teflon TLD의 감마선 조사는 $^{60}Co$ 0.1 Gy로 하였다. LiF:Mg,Cu,Na,Si Teflon TLD의 열처리 특성의 연구는 전기로와 판독장치를 이용하여 열처리 온도와 열처리 시간을 변화시키면서, 측정반복횟수에 따른 열형광강도 변화를 관찰하는 방법으로 수행하였다. LiF:Mg,Cu,Na,Si Teflon TLD의 열처리 조건은 조사전 열처리를 $80^{\circ}C$에서 1 시간 한 후 $280^{\circ}C$까지 판독하고 판독 후 열처리를 $270^{\circ}C$에서 20 초간 하는 것으로 결정되었고, 이 조건에서 10 회 반복측정시 원래의 열형광강도는 5%의 감소를 보였다.

  • PDF

얇은 LiF:Mg,Cu,Na,Si 검출기의 베타선장에 대한 TL 반응 (Thermoluminescent Response of Thin LiF:Mg,Cu,Na,Si Detectors to Beta Radiation)

  • 남영미;김장렬;장시영;조현우;김현자
    • Journal of Radiation Protection and Research
    • /
    • 제24권1호
    • /
    • pp.39-43
    • /
    • 1999
  • 최근 개발된 감도가 좋은 LiF:Mg,Cu,Na,Si TL물결을 Teflon과 혼합한 후, 않은 디스크 형태로 압축 성형한 얇은 LiF:Mg,Cu,Na,Si Teflon 검출기를 제작하고 베타선 검출기로서의 TL 반응특성을 연구하였다. 한국원자력연구소의 $^{147}Pm,\;^{204}Tl$$^{90}Sr/^{90}Y$ 베타선원을 이용하여 두께 $2mg/cm^2$인 Kapton 박막을 덮은 상태로 베타선을 조사하였다. 제작한 않은 LiF:Mg,Cu,Na,Si 검출기들의 $^{137}Cs$에 대한 batch 균질성은 4.7%, 베타선에 대한 선량의존성은 0.1 mGy에서 100 Gy까지 선형성을 나타내고, 에너지의존성은 $^{147}Pm,\;^{204}Tl$$^{90}Sr/^{90}Y$ 베타선에 대해 각각 0.46, 1.09 및 1.06 이었다. 그리고 베타선에 대한 방향의존성은 $0.93{\pm}0.03\;(^{147}Pm),\;0.94{\pm}0.04\;(^{204}Tl)$$0.92{\pm}0.05\;(^{90}Sr/^{90}Y)$으로, 이들 얇은 LiF:Mg,Cu,Na,Si 검출기들에 대한 TL 반응특성의 결과는 국제표준기구(ISO)의 베타선량계 기준을 잘 만족하였다.

  • PDF

LiF:Mg,Cu,Na,Si TL 소자의 선량계적 특성 (Dosimetric Properties of LiF:Mg,Cu,Na,Si TL pellets)

  • 남영미;김장렬;장시영
    • Journal of Radiation Protection and Research
    • /
    • 제26권1호
    • /
    • pp.7-12
    • /
    • 2001
  • 최근 개발된 방사선량 측정용 LiF:Mg,Cu,Na,Si TL 소자의 글로우 곡선, 방출스펙트럼, 광자에 대한 선량의존성, 에너지의존성 및 페이팅 등과 같은 물리적 및 선량계적 특성들을 연구하였다. LiF:Mg,Cu,Na,Si TL 소자는 LiF:Mg,Cu,Na,Si TL 분말에 압력을 가한 후 소결하는 방법으로 제조되었다. 방사선에 대한 특성을 알아보기 위하여 광자선 조사는 한국원자력연구소의 X선 발생 장치 및 $^{137}Cs$ ${\gamma}$선 원격조사장치를 이용하였으며, 사용된 광자선 에너지 범위는 20-662keV, 선량 범위는 $10^{-6}-10^{-2}\;Gy$이었다. 글로우 곡선은 수동형의 TLD 판독장치 (System 310, Teledyne)로 질소를 흘리면서 선형적인 가열률로 측정하였으며, TL 강도는 글로우 곡선을 전체 적분한 면적으로 평가하였다. $5^{\circ}C\;s^{-1}$의 선형적인 가열률로 측정한 글로우 곡선은 5개의 피크들로 분리되었으며, $234^{\circ}C$에 나타나는 주피크의 활성화에너지는 2.34 eV, 진동수인자는 $1.00{\times}10^{23}$이고, 방출스펙트럼은 410nm를 중심으로한 단일한 분포로 나타났다. 선량의존성은 100Gy 이상까지 선형성을 나타내었으며, $^{137}Cs$에 대한 저에너지 광자의 상대적인 에너지 반응값은 20% 범위 이내였다. 또한 실온에서 1년간 보관하였을 때, 시간경과에 따른 TL 감도의 감소가 거의 없는 좋은 페이딩 특성을 보였다.

  • PDF

LiF:Mg,Cu,Si TLD의 발광곡선 분석

  • 장인수;이정일;김장렬;정기수
    • 대한방사선방어학회:학술대회논문집
    • /
    • 대한방사선방어학회 2011년도 춘계 학술발표회 및 심포지엄
    • /
    • pp.30-31
    • /
    • 2011
  • PDF

Generation of LiF(Mg,Cu,Na,Si) thermoluminescent crystal and evaluation of dose response and sensitivity

  • Abdollah Khorshidi
    • Nuclear Engineering and Technology
    • /
    • 제56권7호
    • /
    • pp.2790-2798
    • /
    • 2024
  • In this research, thermoluminescent pellets were prepared by adding Mg, Cu, Na and Si impurities to lithium fluoride (LiF) crystal powder via melting and quenching methods to study dosimetric characteristics. Here, its reproducibility, dose response, dosimeter sensitivity, thermal and optical fading were investigated and the obtained results were compared with the properties of LiF: Cu, Mg, P crystal nominated as GR-200.