• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.273-273
• /
• 2010

최근 들어 에너지 개발과 환경문제의 해결방안으로 열전발전 및 열전냉각에 많은 관심과 연구가 진행되고 있다. 열전소재의 특성 향상을 위해 열전성능지수를 높이기 위하여 나노 입자상을 열전소재 내에 분산하고자 하는 연구가 진행되었다. Grain 내에 나노 입자를 분산하기 위해서는 원료 입자에서부터 나노 입자가 열전소재 내에 분산되어야 하며 이것은 산화물 나노입자의 코어-쉘 형성으로부터 가능하다. 이 과정에서 나노 입자를 열전소재 내에 코어로 분산하기위한 나노입자의 합성 및 제어가 필수적이다. 본 연구에서는 용융염법을 이용한 BaTiO3 나노 일자를 합성하고 이들을 용매에 분산하는 것을 목표로 하였다. 염으로는 KCl, LiCl, NaCl 및 이들의 혼합 염을 사용하였으며 염의 청가량, 염의 종류, 반응온도 및 반응시간의 변화에 따라 BaTiO3 나노 입자를 합성하였다. 또한, 합성된 나노 입자의 입자크기와 응집 제어를 통해 나노입자들의 분산 상태를 확인해 보았다. 이 결과는 SEM, TEM, 입도측정기, XRD등의 측정 결과를 통하여 확인하고자 하였다.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 한국결정학회 2001년도 정기총회 및 춘계학술대회연구발표회(한국결정학회)
• /
• pp.22-22
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1049-1050
• /
• 2003

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2004년도 추계총회 및 학술발표회
• /
• pp.25-25
• /
• 2004

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 한국방사성폐기물학회 2011년도 추계학술논문요약집
• /
• pp.173-174
• /
• 2011

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 한국방사성폐기물학회 2012년도 춘계학술논문요약집
• /
• pp.71-72
• /
• 2012

• Journal of the Korean Society of Groundwater Environment
• /
• 제3권1호
• /
• pp.37-49
• /
• 1996

The objectives of this study are to investigate the groundwater and surface water contamination, to interpret the attenuation mechanism of contaminant transport, and to find the appropriate contamination indicator. at the two big landfill sites : Nanjido Landfill and Hwasung Landfill. Leachate from the Nanjido, th, Hwasung and the Kimpo waste disposal sites is characterized by high temperature (31.7-40.1$^{\circ}C$), high electric conductivity (14,650-32,800 ${\mu}$S/cm), somewhat higher pH(7.58-8.45) and low Eh (-119.4-20.4 mV), and is enriched in both major (Na$^{＋}$, K$^{＋}$, Ca$^{2＋}$, Mg$^{2＋}$, HC $O_3$$^{－}$, Cl$^{－}$) and minor (Mn, Sr$^{2＋}$, Ba$^{2＋}$, Li$^{＋}$, F$^{－}$, Br$^{－}$) ions. Municipal solid waste leachate and industrial waste leachate are effectively discriminated by the content of S $O_4$$^{2－}$, Fe, and heavy metals. The attenuation mechanism of each component was assessed using the chemical analysis. Cl-normalizing process, WATEQ4F simulation, and preceding flownet analysis. Based on the calculation of Contamination Factor, K, Na, Ca, Mg, B, Zn, HC $O_3$, Cl, F, Br and TOC are effective contamination indicators in the Nanjido landfill site, and K, Na, Ca, Mg, B, S $O_4$, HC $O_3$, Cl, F, Br and TOC in the Habsburg landfill site Particularly, TOC is the best contamination indicator in landfill sites influenced by sea water.

• Macromolecular Research
• /
• 제12권4호
• /
• pp.422-426
• /
• 2004

Solid polymer electrolytes based on poly(ethylene glycol)-polyurethane (PEG-PU) complexed with LiClO$_4$ salt have been prepared by the solvent casting method. A PEG-PU material (PEG:4,4'-diphenylmethane diisocyanate: l,4-butanediol = 1:2:1) was synthesized through a typical two-step condensation reaction. We investigated the effects of the salt concentration on the ionic conductivity ($\sigma$) and the glass transition temperature (T$_{g}$ ) of the complex electrolytes by using alternating current impedance spectroscopy, differential scanning calorimetry, and dynamic mechanical thermal analysis. The measured values of both $\sigma$ and T$_{g}$ exhibited similar tendencies in that they had maxima within the range studied, probably because of two opposite effects, i.e., the increased number of carrier ions and the decreased chain mobility (or increased T$_{g}$ ) caused by the increase in the salt concentration. The highest conductivity, on the order of 2.43 ${\times}$ 10$^{6}$ S$cm^{-1}$ /, was obtained at an [O]/[Li$^{+}$] ratio of ca. 16 (0.92 ㏖ salt per kg of matrix polymer).

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.476-480
• /
• 2009

A polymer composite electrolyte of a blend of poly(methyl methacrylate)(PMMA) and poly(ethylene oxide) (PEO) as a host polymer, the ethylene carbonate as a solvent, and $LiClO_4$ as a salt was studied. The crystallinity of the polymer electrolytes was evaluated using differential scanning calorimeter(DSC). The ionic conductivity of the polymer electrolytes was measured by frequency response analyzer(FRA) method. The effect of PEO/PMMA blend ratios on the ionic conduction in these electrolytes was investigated. The electrolyte films showed a phase separation due to immiscibility of the PMMA with the PEO. The PMMA-rich phase and the PEO-rich phase were produced during a film casting. The ionic conductivity of blend electrolyte was dependent on the content of PMMA and showed the highest value at 20 wt.%. However, when PMMA content exceeds 20 wt.%, the ionic conductivity was decreased due to the slow ionic transport through the PMMA-rich phase.

• Journal of the Korean Applied Science and Technology
• /
• 제24권3호
• /
• pp.238-245
• /
• 2007

$Eu^{3+}$ doped $YGdO_3$ phosphors particles which have fine size and narrow size distribution with non aggregated uniform morphology were prepared by solvent evaporation method for the improvement of emission efficiency. Several parameters have been investigated in this study such as the influences of composition ratio of host materials, calcination temperature, amount of activator, surfactant, pH and flux on the photoluminescence intensity, particle size and dispersion. $Eu^{3+}$ doped $YGdO_3$ phosphor presented a strong narrow band emission peak at 612nm. The maximum emission intensity of$YGdO_3:Eu^{3+}$ occurred when $Eu^{3+}$ concentration is 3wt% under vacuum ultra violet excitation. Prepared phosphors were found to have small round-shaped particles about 150nm in size. The addition of PVA as a surfactant inhibits the grain growth and the agglomeration of particles efficiently by reducing the oxygen bridge bonds. As the pH reduces, PL intensity increase due to reducing the formation of oxygen bridge bonds. The particles prepared from solvent evaporation method with 5wt% LiCl were found to have 120% PL intensity compare to particles prepared without LiCl flux.