• Journal of Electrochemical Science and Technology
• /
• 제9권1호
• /
• pp.51-59
• /
• 2018

Various Si-Fe-Al ternary alloys were prepared with the same amount of Si by the melt spinning technique. The feasibility of the capacity prediction approach based on the estimation of the active amount of Si using the phase diagram was practically examined and reported. These predictions were verified by the electrochemical test of fabricated coin cells and other characterization methods. The capacity prediction approach using the phase diagram might be a fundamental and efficient method to accelerate the practical application of Si-based alloys as the anode material for Li-ion batteries. The details on the prediction procedure were discussed.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.268-276
• /
• 2016

A hybrid sinusoidal-pulse current (HSPC) charging method for the Li-ion batteries in electric vehicle applications is proposed in this paper. The HSPC charging method is based on the Li-ion battery ac-impedance spectrum analysis, while taking into account the high power requirement and system integration. The proposed HSPC method overcomes the power limitation in the sinusoidal ripple current (SRC) charging method. The charger shares the power devices in the motor inverter for hardware cost saving. Phase shifting in multiple pulse currents is employed to generate a high frequency multilevel charging current. Simulation and experimental results show that the proposed HSPC method improves the charger efficiency related to the hardware and the battery energy transfer efficiency.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.552-553
• /
• 2012

본 논문에서는 리튬 이온(Li-ion) 배터리의 열화과정 및 SOH(State-of-Health, 잔존수명) 판별방법에 대해 분석하였다. 리튬 이온 배터리의 SOH는 충/방전 주기의 횟수와 방법 및 전류에 따라 달라지며, 특히 온도에 따라 임피던스가 민감하게 변화하며, 그 과정에서 OCV(Open Circuit Voltage, 개방전압)가 변하게 된다. 따라서 온도변화와 배터리의 충/방전 과정에서 변화하는 임피던스의 특성과 그에 따른 OCV 변화를 고려하여 SOH 판별하는 방법과 리튬 이온 배터리의 열화 과정을 분석하여 소개한다.

• Journal of Electrochemical Science and Technology
• /
• 제10권1호
• /
• pp.82-88
• /
• 2019

Here, we report on nanocrystalline Si-Al-M (M = Fe, Cu, Ni, Zr) alloys for use as an anode for lithium-ion batteries, which were fabricated via a melt-spinning method. Based on the XRD and TEM analyses, it was found that the Si-Al-M alloys consist of nanocrystalline Si grains surrounded by an amorphous matrix phase. Among the Si-Al-M alloys with different metal composition, Ni-incorporated Si-Al-M alloy electrode retained the high discharge capacity of 2492 mAh/g and exhibited improved cyclability. The superior $Li^+$ storage performance of Si-Al-M alloy with Ni component is mainly responsible for the incorporated Ni, which induces the formation of ductile and conductive inactive matrix with crystalline Al phase, in addition to the grain size reduction of active Si phase.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.339-346
• /
• 2022

Silicon (Si) has attracted considerable attention due to its high theoretical capacity compared to conventional graphite anode materials. However, Si-based anode materials suffer from rapid capacity loss due to mechanical failure caused by large volume change during cycling. To alleviate this phenomenon, crosslinked polymeric binders with strong interactions are highly desirable to ensure the electrode integrity. In this study, thermally crosslinked polyimide binders were used for Si-alloy anodes in Li-ion batteries. The crosslinked polyimide binder was found to have high adhesion strength, resulting in enhanced electrode integrity during cycling. Therefore, the Si-alloy anodes with crosslinked polyimide binder provide enhanced electrochemical performance, such as Coulombic efficiency, capacity retention, and cycle stability.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.295-298
• /
• 1998

We have investigated ionic conductivity and electrochemical stability of the electrolytes containing organic solvent. Ion conductivities were measured between 10 and 80$^{\circ}C$, and electrochemical stabilities were determined by cyclic voltammetry on glassy carbon, platinum and aluminum electrodes. Ionic conductivity of electrolyte(EC:DEC=1:1) with IM LiPF$\_$6/ shows better than that of the other electrolytes having Li salts. The IM LiBF$_4$-PC electrolyte exhibits good electrochemical stability. IM LiPF$\_$6/ (EC:DEC=1:1) and IM LiPF$\_$6/ (EC:DMC=1:1) electrolytes are used for the high capacity of battery system.

• Bulletin of the Korean Chemical Society
• /
• 제17권11호
• /
• pp.1004-1009
• /
• 1996

The interactions between a rod-coil liquid crystalline oligomer, ethyl 4-[4'-oxy-4-biphenylcarbonyloxy]-4'-biphenylcarboxylate with poly(ethylene oxide) (DP=12) (12-4) and LiCF3SO3 have been characterized by using Raman spectroscopy. Band assignments were made comparing the spectrum of 12-4 with those of the poly(ethylene glycol) monomethyl ether(PEGME) (Mw=550) and the ethyl-4'-hydroxybiphenyl-4-carboxylate (EHBPC), which are the coil and mesogen analogues, respectively. Analyzing characteristic bands of the 12-4-salt complex, we have found that the bands belonging to the coil and mesogenic units are changed in both intensities and frequencies. The spectral changes were interpreted from the viewpoint of the complexation between 12-4 and the Li+ ion. However, the possibility that the spectral changes in the mesogenic unit are not due to the complexation with the Li+ ion, but due to the conformational changes by the intercalation of nondissociated LiCF3SO3, is not ruled out.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 춘계 학술발표강연 및 논문개요집
• /
• pp.108-108
• /
• 2002

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.129.1-129
• /
• 2000

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.145.2-145
• /
• 2002