• Clean Technology
• /
• v.30 no.3
• /
• pp.267-275
• /
• 2024

Lithium-ion batteries (LIBs) have attracted significant attention as potential energy storage solutions due to their high energy density, minimal self-discharge, extended cycle life, and absence of memory effects. However, conventional LIBs use graphite as the anode material and as a result struggle to meet the increasing demand for higher energy density because of the low theoretical capacity of graphite. In order to enhance Li storage capacity and address the current limitations of LIBs, this study designed and analyzed SnO₂ nanoflakes/CNF, which is an advanced anode material with a unique hierarchical structure synthesized via a facile method involving incipient wetness followed by annealing. The in-situ formed SnO₂ nanoflakes improve the electrolyte accessibility and shorten the ion and electron transport pathways, thereby enhancing the reaction kinetics. Additionally, the CNF matrix enhances the electrical conductivity, accelerates electron transport, and mitigates volume changes. The integrated SnO₂ nanoflakes/CNF cell demonstrated outstanding cycling performance and excellent rate capability, achieving a notable reversible capacity of 636 mAh g^-1 after 100 cycles at 0.1 C. This study provides valuable insights into the design of high-efficiency anode materials for the advancement of high-performance LIBs.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.793-796
• /
• 2004

Process Parameters were studied in synthesis of LiCoO$_2$ Powder by ultrasonic spray Pyrolysis. Concentration of the mixed solution influenced the size, shape, and yield of the synthesized powder. The yield was affected primarily by the height of the solution, and then by the flow rate of a carrier gas. The temperature of the reactor governed the crystallinity and morphology of the powder. LiCoO$_2$ powders were synthesized as a layered high temperature phase above 800$^{\circ}C$. The synthesized powders were sphere and secondary Particles consisted of primary particles of 55-70 nm. The secondary Particles became bigger from 0.28 to 1.43 $\mu\textrm{m}$ as the concentration of the solution was increased from 0.05 to 2.0 M. The 2.0 M solution provided the highest production rate.

• Journal of Electrochemical Science and Technology
• /
• v.5 no.2
• /
• pp.58-64
• /
• 2014

The surface of an ordered mesoporous silica (OMS) was functionalized using 1H,1H,2H,2H-perfluorooctyltrimethoxysilane at $20^{\circ}C$ and $60^{\circ}C$. It was shown that only elevated temperature allows lyophobic properties on the walls of OMS, eventually preventing pore flooding with nonaqueous electrolytes. The functionalized OMSs (OMS-F) were characterized with various techniques: wettability test, $N_2$ sorption measurement, high-resolution transmission electron microscopy (HR-TEM). Cathodes of $10mg/cm^2$ loading were prepared with a commercial Pt/C catalyst and polyvinylidene fluoride (PVDF, 2.5 wt.%) binder using a typical doctor blade method on a commercial gas diffusion layer (GDL) in the presence or in the absence of OMS-F additives. Subsequent discharge-charge curves were taken in a 1M LiTFSI-TEGDME electrolyte at 60oC in pure oxygen atmosphere. It was found that the discharge capacity was significantly affected by OMS-F: 5 wt.% of additive extended discharge capacity by a factor 1.5. On the other hand, a similar OMS material but synthesized at $20^{\circ}C$ did not show lyophobic properties and deteriorated cathode capacity.

• Journal of Powder Materials
• /
• v.22 no.5
• /
• pp.326-330
• /
• 2015

In this study, we demonstrate the photoelectrochromic devices composed of $TiO_2$ and $WO_3$ nanostructures prepared by anodization method. The morphology and the crystal structure of anodized $TiO_2$ nanotubes and $WO_3$ nanoporous layers are investigated by SEM and XRD. To fabricate a transparent photoelectrode on FTO substrate, a $TiO_2$ nanotube membrane, which has been detached from Ti substrate, is transferred to FTO substrate and annealed at $450^{\circ}C$ for 1 hr. The photoelectrode of $TiO_2$ nanotube and the counter electrode of $WO_3$ nanoporous layer are assembled and the inner space is filled with a liquid electrolyte containing 0.5 M LiI and 5 mM $I_2$ as a redox mediator. The properties of the photoelectrochromic devices is investigated and Pt-$WO_3$ electrode system shows better electrochromic performance compared to $WO_3$ electrode.

• Journal of Powder Materials
• /
• v.21 no.2
• /
• pp.131-136
• /
• 2014

Cathode materials and their precursors are prepared with transition metal solutions recycled from the the waste lithium-ion batteries containing NCM (nickel-cobalt-manganese) cathodes by a $H_2$ and C-reduction process. The recycled transition metal sulfate solutions are used in a co-precipitation process in a CSTR reactor to obtain the transition metal hydroxide. The NCM cathode materials (Ni:Mn:Co=5:3:2) are prepared from the transition metal hydroxide by calcining with lithium carbonate. X-ray diffraction and scanning electron microscopy analyses show that the cathode material has a layered structure and particle size of about 10 ${\mu}m$. The cathode materials also exhibited a capacity of about 160 mAh/g with a retention rate of 93~96% after 100 cycles.

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.298-303
• /
• 1996

A double diffusion technique is developed to enhance the effective mode index of optical waveguides in $LiTaO_3$. It consists of Zn diffusion from the vapor phase at relatively low temperatures (750->$800^{\circ}C$), into waveguides initially produced by Ti indiffusion at higher temperature (1150->$1200^{\circ}C$). Both X- and Z-cut substrates are investigated. A model that combines profiles of both diffusion is formulated to calculate the expected effective index values for planar waveguides. Good agreement is found between experimental results and model predictions which assume that the initial Ti profile is not affected by the lower temperature Zn diffusion. Effective index enhancements as high as 0.005 and 0.003 are obtained by this method for the fundamental extraordinary and ordinary modes, respectively.

• Journal of the Korean Ceramic Society
• /
• v.47 no.5
• /
• pp.430-432
• /
• 2010

We verified through a noncritical phase-matched second-harmonic generation experiment that the periodically-poled $LiNbO_3$ (PPLN) had a large effective nonlinear optical coefficient, demonstrating that the QPM grating was uniform throughout the entire length of PPLN. The quasi-phase matching temperature was $193.4^{\circ}C$. The maximum SHG output power at the fundamental power of 2.0 W was found to be 18.0 mW; generated second-harmonic beam was found to have no photorefractive effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.2037-2042
• /
• 2013

A TCO-less palladium (Pd) catalytic layer on the glass substrate was assessed as the counter electrode (CE) in a dye sensitized solar cell (DSSC) to confirm the stability of Pd with the $I^-/I_3{^-}$electrolyte on the DSSC performance. A 90nm-thick Pd film was deposited by a thermal evaporator. Finally, DSSC devices of $0.45cm^2$ with glass/FTO/blocking layer/$TiO_2$/dye/electrolyte(10 mM LiI + 1 mM $I_2$ + 0.1 M $LiClO_4$ in acetonitrile solution)/Pd/glass structure was prepared. We investigated the microstructure and photovoltaic property at 1 and 12 hours after the sample preparation. The optical microscopy, field emission scanning electron microscopy (FESEM), cyclic voltammetry measurement (C-V), and current voltage (I-V) were employed to measure the microstructure and photovoltaic property evolution. Microstructure analysis showed that the corrosion by reaction between the Pd layer and the electrolyte occurred as time went by, which led the decrease of the catalytic activity and the efficiency. I-V result revealed that the energy conversion efficiency after 1 and 12 hours was 0.34% and 0.15%, respectively. Our results implied that we might employ the other non-$I^-/I_3{^-}$electrolyte or the other catalytic metal layers to guarantee the long term stability of the DSSC devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.510-510
• /
• 2007

Titanate nanotube(TNT)는 높은 비표면적과 우수한 물리화학적 특성을 가지고 있어 광촉매, 수소 저장재료, 태양전지용 전극재료 등에 적용되고 있다. 또한, 티타네이트 나노튜브는 전자 이동이 원활한 구조적 특징을 가지고 있어 리듐 이차전지용 호스트 재료로서 많은 연구가 진행 중이다. 이에 본 연구에서는 저온균일침전법으로 제조한 루틸상 $TiO_2$ 분말에 Lithium chloride를 1~10wt%를 동시에 첨가한 후 10M의 sodium hydroxide 수용액 내에서 수열합성하여 리튬이 도핑된 티타네이트 나노튜브를 제조하였다. 제조된 분말의 입자형상 및 크기는 전자주사 현미경을 이용하여 관찰하였으며, X-선 회절분석을 이용하여 리튬 첨가에 따른 결정상 변화를 관찰하였다. 또한 리튬이 도핑된 티타네이트 나노튜브의 전기화학적 특성 평가를 위해 양극 활물질 : 도전제 : 바인더를 75 : 20 : 5의 비율로 혼합한 후 coin cell을 제조하였고, potentiostat를 이용하여 용량 측정 및 cycle 특성을 실시하였다. 수열 합성법에 의해 형성된 입자는 직경 10nm, 길이 수 ${\mu}m$로 관찰되었으며, X-선 회절 시험 결과 LiO와 같은 이차상은 발견되지 않았다. 측정된 coin cell의 용량은 240mAh/g을 나타내었으나, 싸이클 특성이 빠르게 저하됨을 확인할 수 있었다.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.611-619
• /
• 1994

The formation of , $\beta$-quartz solid solution in the $LiO_2-Al_2O_3-SiO_2$glasses containing $TiO_{2}$ and $ZrO_{2}$ as nucleating agents was investigated for various temperatures and times. Linear thermal expansion coefficients of base glasses and crystallized glasses were $45\sim 55 \times 10^{-7} \textrm{cm}/^{\circ}C$ and $ -8\sim +8 \times 10^{-7}\textrm{cm}/^{\circ}C$ ($25^{\circ}C \sim 525^{\circ}C$), respectively. The crystal phase formed by heat-treatment below $900^{\circ}C$was , $\beta$--quartz solid solution, and the crystal sizes were less than 0.21m. On the other hand, the crystal size of the base glasses containing 3.5 wt% MgO is relatively uniform and is independent with temperature. The specimen containing 3.5 wt% ZnO shows a minimum crystal size(O.l8$\mu \textrm{m}$), and it strongly depends on temperature of heat-treatment.