• Journal of Magnetics
• /
• 제16권3호
• /
• pp.304-307
• /
• 2011

High performance Nd-Fe-B magnets can be manufactured by both sintering and hot deformation. The corrosion behaviors of the magnets prepared by the two processes were compared. Effect of microstructure on the corrosion resistance of Nd-Fe-B magnets was also investigated. A neutral salt spray test (NSS) was performed for the different-processed magnets. The weight losses of the samples after the corrosion test were measured. The corrosion microstructures were observed using a scanning electron microscope. It shows that the corrosion resistance of hot deformed magnets is much better than that of the sintered ones because the grain size and the distribution of Nd-rich phases of the hot deformed magnets are much finer and more uniform than those of the sintered ones. The different microstructure between the sintered and the hot deformed magnets causes the different corrosion behavior.

• 통합자연과학논문집
• /
• 제10권3호
• /
• pp.131-136
• /
• 2017

The chemical shifts in the $^{13}C$ NMR spectra of 2,3,4,5-tetraphenyl-1-silacyclopentdienide dianion $[SiC_4Ph_4]^{2-}{\cdot}2[K^+]$ (3) and 2,3,4,5-tetraphenyl-1-germacyclopentdienide dianion $[GeC_4Ph_4]^{2-}{\cdot}2[K^+]$ (4) were compared to those of $[SiC_4Ph_4]^{2-}{\cdot}2[Li^+]$ (5), $[SiC_4Ph_4]^{2-}{\cdot}2[Na^+]$ (6), and $[GeC_4Ph_4]^{2-}{\cdot}2[Li^+]$ (7). The average polarizations in two phenyl groups of two potassium salts are decreased over 15% to 20% comparing to those of the lithium salts and sodium salt {$[EC_4Ph_4]^{2-}{\cdot}2[M^+]$ (E=Si, Ge, M=Li, Na) due to the effect of the counter potassium cation.

• Membrane and Water Treatment
• /
• 제13권2호
• /
• pp.105-110
• /
• 2022

Al₂O₃ positively charged nanofiltration composite membrane was successfully prepared with aluminate coupling agent (ACA) as modifier, sodium bisulfite (NaHSO₃) and potassium persulfate (K₂S₂O₈) as initiator and methacryloyloxyethyl trimethylammonium chloride (DMC) as crosslinking monomer. The surface of the membrane before grafting and after polymerization were characterized by SEM and FT-IR. Three factor and three-level orthogonal experiments were designed to explore the optimal conditions for membrane preparation, and the optimal group was successfully prepared. The filtration experiments of different salt solutions were carried out, and the retention molecular weight was determined by polyethylene glycol (PEG). The results showed that the polymerization temperature had the greatest effect on the rejection rate, followed by the reaction time, and the concentration of DMC had the least effect on the rejection rate. The rejection rates of CaCl₂, MgSO₄, NaCl and Na₂SO₄ in the optimal group were 83.8%, 81.3%, 28.1% and 23.6% (average value), respectively. The molecule weight cut-off of 90% (MWCO) of the optimal group was about 460, which belongs to nanofiltration membrane.

• Journal of Microbiology and Biotechnology
• /
• 제26권7호
• /
• pp.1311-1319
• /
• 2016

Alternaria brassicicola (Schwein.) invades Brassicaceae and causes black spot disease, significantly lowering productivity. Mitogen-activated protein kinases (MAPKs) and their upstream kinases, including MAPK kinases (MAPKKs) and MAPKK kinases (MAPKKK), comprise one of the most important signaling pathways determining the pathogenicity of diverse plant pathogens. The AbSte7 gene in the genome of A. brassicicola was predicted to be a homolog of yeast Ste7, a MAPKK; therefore, the function was characterized by generating null mutant strains with a gene replacement method. AbSte7 replacement mutants (RMs) had a slower growth rate and altered colony morphology compared with the wild-type strain. Disruption of the AbSte7 gene resulted in defects in conidiation and melanin accumulation. AbSte7 was also involved in the resistance pathways in salt and oxidative stress, working to negatively regulate salt tolerance and positively regulate oxidative stress. Pathogenicity assays revealed that AbSte7 RMs could not infect intact cabbage leaves, but only formed very small lesions in wounded leaves, whereas typical lesions appeared on both intact and wounded leaves inoculated with the wild-type strain. As the first studied MAPKK in A. brassicicola, these data strongly suggest that the AbSte7 gene is an essential element for the growth, development, and pathogenicity of A. brassicicola.

• 패션비즈니스
• /
• 제13권3호
• /
• pp.136-148
• /
• 2009

The phenomenon of the shrinkage of silk fibers induced by inorganic salts including LiBr, $Ca(NO_3){_2}$, and $CaCl_2$, has been studied up to the present as one of the finishing methods of silk. It is expected that the shrinkage phenomenon may greatly contribute to the realization of the high sensibility of silk fibers. Especially the shrinkage enables the expression of three-dimensional appearance of silk fabrics along with the improvements in dimensional stability, resilience in stretching, and comfort. Numerous theoretical studies on the contraction phenomenon by $Ca(NO_3){_2}$ have been conducted so far. These studies have focused mostly on the silk fibers. It is difficult to find studies on silk fabrics. The negative aspects of the finishing are such as strength drop, yellowish discoloration, and fiber damage. These should also be considered as well as the positive aspects. In this study, the phenomenon of salt shrinkage is diversely reviewed by applying $Ca(NO_3){_2}$ solution for the silk fabrics as objects. The changes in the air permeability, thickness, and color were investigated with focus on the shrinkage of the silk fabrics according to the changes in treatment conditions. Some findings from this study are as follows: Within short period of time at the initiation of salt shrinkage, the salt shrinkage proceeds effectively. In the case of concentration of 47.4%, or 46.3% of $Ca(NO_3){_2}$ solution, appropriate treatment time seems to be 20seconds, or $2{\sim}8$minutes, respectively. Excessive shrinkage is obtained when lower liquor ratio is adopted. As a result, the condition is acting extremely disadvantageously against the thickness and yellow discoloration aspects.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.3952-3965
• /
• 2021

In this study, volcanic ash was used as raw material to prepare waste forms with different silicon/aluminum (Si/Al) molar ratios to immobilize sodium-salt waste (SSW) containing simulated ¹³⁷Cs. Effects of Si/Al molar ratios (3:1 and 2:1) and sodium salts on sintering behavior of waste forms and immobilization mechanism of Cs⁺ were investigated. Results indicated that the main mineral phase of sintered waste-form matrixes was albite, and the formation of major phases was found to depend on Si/Al molar ratios. Si/Al molar ratio of 2 was favorable for the formation of pollucite, and the formation and crystallization of mineral phases were also decided based on physicochemical characteristics of sodium salts. Furthermore, product consistency test results indicated that the immobilization of Cs⁺ was related to Si/Al molar ratio, types of sodium salts, and glassy phase. Waste forms with Si/Al molar ratio of 2 exhibited better ability to immobilize Cs⁺, whereas the influence of sodium salts and glassy phases on the immobilization of SSW showed more complicated relationship. In waste forms with Si/Al molar ratio of 2, Cs⁺ leaching concentrations of samples containing Na₂B₄O₇·10H₂O and NaOH were low. Na₂B₄O₇·10H₂O easily transformed into liquid phase during sintering to consequently achieve low temperature liquid-phase sintering, which is beneficial to avoid the volatilization of Cs⁺ at high temperature. Results clearly reveal that waste forms with Si/Al molar ratio of 2 and containing Na₂B₄O₇·10H₂O show excellent immobilization of Cs⁺.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4431-4440
• /
• 2022

An advanced nuclear reactor based on molten salts including a molten salt reactor and pyroprocessing needs a sensitive monitoring system suitable for operation in harsh environments with limited access. Multi-element detection is challenging with the conventional technologies that are compatible with the in-situ operation; hence laser-induced breakdown spectroscopy (LIBS) has been investigated as a potential alternative. However, limited precision is a chronic problem with LIBS. We increased the precision of LIBS under high temperature by protecting optics using a gas protective layer and correcting for shotto-shot variance and lens-to-sample distance using a laser-induced acoustic signal. This study investigates cerium as a surrogate for uranium and corrosion products for simulating corrosive environments in LiCl-KCl. While the un-corrected limit of detection (LOD) range is 425-513 ppm, the acoustic-corrected LOD range is 360-397 ppm. The typical cerium concentrations in pyroprocessing are about two orders of magnitude higher than the LOD found in this study. A LIBS monitoring system that adopts these methods could have a significant impact on the ability to monitor and provide early detection of the transient behavior of salt composition in advanced molten salt-based nuclear reactors.

• 한국식품영양과학회지
• /
• 제43권4호
• /
• pp.530-536
• /
• 2014

밀가루에 현미가루와 수수가루의 비율을 달리하여 혼합하고 1회 죽염 2%를 첨가하여 3가지의 생면을 제조하였으며, 이를 밀가루와 정제염으로 만든 생면과 품질특성 및 in vitro 항산화 효과를 비교하였다. 품질특성 중 중량, 수분흡수율, 탁도는 현미가루와 수수가루를 첨가한 WBSN-b가 39.5 g, 97.4%, 0.62로 나타나 밀가루로 제조한 WN-p 측정 결과인 38.5 g, 92.5%, 0.59와 유사하였다. 탄력성은 WN-p(73.5%)와 WBSN-b(68.3%)에서 높았으며, 다음으로 WBN-b, WSN-b의 순으로 나타났다. 관능평가에서 전체적인 기호도는 WBSN-b가 6.4점으로 가장 높았고, WSN-b, WBN-b, WN-p는 6.1, 5.3, 5.3점이었다. 생면의 pH는 WBN-b는 7.4, WBSN-b는 7.5, WSN-b는 7.5, WN-p는 6.6로 1회 죽염과 현미가루와 수수가루를 첨가한 생면이 pH가 높게 나타났다. DPPH free radical 및 hydroxy radical 소거 효과에서는 현미가루와 수수가루를 10%씩 혼합한 생면 WBSN-b와 수수가루 20%를 혼합한 WSN-b가 높은 라디칼 소거능을 나타내었다. 본 연구 결과 현미가루와 수수가루를 각각 10%씩 그리고 1회 죽염 2%를 첨가한 생면이 밀가루로 제조한 생면의 품질특성에 가장 근접하였고, 기호면과 항산화 효과에서 가장 우수하였다.

• 한국식품영양과학회지
• /
• 제43권7호
• /
• pp.1048-1054
• /
• 2014

소금의 이산화황 발생 원인을 구명하기 위하여 갯벌천일염 (MSS)과 구운 소금(RS)의 시간 경과(RS1, RS2, RS3 및 RS4)에 따른 일반성분, 중금속, 무기질 함량을 분석하고 이산화황 발생 및 각 소금의 환원력을 비교 분석하였다. 이산화황과 아황산은 모두 검출되지 않았으며, 황산이온은 MSS 및 RS에서 각각 35,601.65 ppm과 29,878.15~36,097.45 ppm으로 시간이 지날수록 감소되는 경향을 나타내었다. ORP는 MSS(181.15 mV)에서 가장 낮았고 RS1(58.55 mV)에서 가장 높았다. 수분은 MSS가 9.34%였으나 RS에서 크게 감소되었으며, RS의 NaCl은 94.77~95.77%로 증가되었다. RS 시간 경과에 따라 수분과 염도에 차이는 없었다. 불용분과 사분은 MSS에 비해 RS에서 더 높은 함량을 나타내었고 Ca, K, Mg는 유의한 차이를 나타내지 않았다. MSS에 비해 RS의 Cl(556,487.5~612,305.0 ppm) 함량이 높았으며, Br은 MSS(628.1 ppm)에서 더 높은 함량을 나타내었으나 $NO_3$는 모두 유의한 차이를 보이지 않았다. MSS에 비해 RS에서 Pb, As, Hg가 높게 나타났으나 Pb, As, Cd, Hg에서 기준치 이상의 검출은 없었다. MSS와 RS의 Co, Cu, Se, U는 차이가 없었으나 Li, Al, Mn, Fe, Sr은 RS에서 더 높은 함량을 나타내었으며, Mn은 굽는 시간 경과에 따라 감소하는 경향을 나타내었다. 이상의 결과에서 볼 때 MSS와 RS에서 인체에 유해한 영향을 미치는 이산화황 발생은 없었으며, RS 시간 경과에 따른 이산화황 발생도 없는 것으로 나타났다. 중금속의 위해성은 안전 수준이며, 이외 발생될 수 있는 잠재적인 위해성에 대한 관심이 필요할 것으로 판단된다.

• 폴리머
• /
• 제28권6호
• /
• pp.455-459
• /
• 2004

폴리(에틸렌 옥사이드) (PEO)를 기초로 한 전해질의 이온 전도도는 같은 조성인데도 불구하고 보고 된 값은 연구자에 따라 수천 배의 차이가 난다. 한편 세라믹 입자를 충전하면 열적 취급에 따라서 이온전도성이 수천 배 변할 수 있음이 보고되고, 그 원인이 세라믹 입자-PEO 고분자의 상호작용 때문인 것으로 논의되었다. 본 연구에서는 세라믹 입자가 충전되지 않은 PEO$_{10}$LiClO$_4$ 고분자 전해질에 대해서 여러 가지 열적 조건에 따른 이온 전도도의 변화 양상을 조사하고, 이온 전도도 값이 열적 이력에 따라 같은 시료에서도 수백 배 정도 차이가 날 수 있음을 보였다. 이는 PEO의 재결정화 과정이 너무 느리기 때문인 것으로 분석하였다. 따라서 본 연구 결과는 세라믹 충전제 효과가 전도도 이완 현상의 주원인이 아니라는 것을 나타낸다.다.