• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.102-103
• /
• 2018

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.600-601
• /
• 2018

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2012년도 춘계학술논문요약집
• /
• pp.87-88
• /
• 2012

• Journal of Electrochemical Science and Technology
• /
• 제8권4호
• /
• pp.314-322
• /
• 2017

The electrolyte plays one of the most significant roles in the performance of electrochemical supercapacitors. Most liquid organic electrolytes used commercially have temperature and potential range constraints, which limit the possible energy and power output of the supercapacitor. The effect of elevated temperature on a lithium bis(oxalate)borate(LiBOB) salt-based electrolyte was evaluated in a symmetric supercapacitor assembled with activated carbon electrodes and different electrolyte blends of acetonitrile(ACN) and propylene carbonate(PC). The electrochemical properties were investigated using linear sweep voltammetry, cyclic voltammetry, galvanostatic charge-discharge cycles, and electrochemical impedance spectroscopy. In particular, it was shown that LiBOB is stable at an operational temperature of $80^{\circ}C$, and that, blending the solvents helps to improve the overall performance of the supercapacitor. The cells retained about 81% of the initial specific capacitance after 1000 galvanic cycles in the potential range of 0-2.5 V. Thus, LiBOB/ACN:PC electrolytes exhibit a promising role in supercapacitor applications under elevated temperature conditions.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.127-129
• /
• 2008

EPR spectroscopic technique was applied for a quantitative analysis of Eu(II) for a speciation of europium in a LiCl-KCl eutectic melt. By adopting the first absorption line of each isotopes (151Eu and 153Eu), a calibration plot was obtained. The calibration of the EPR intensity shows a good linearity according to the amount of Eu(II). The EPR intensity was identified to increase proportionally with a decrease of the attenuation parameter for EPR microwave power. The fluorescence technique was used qualitatively to find whether either of Eu(II) or Eu(III) ions exists in a molten salt sample. The ICP-AES technique was also adopted to determine the total concentration of europium in the sample, since EPR is only sensitive for detecting the Eu(II) ion. The extent of the reduction of Eu(III) in the LiCl-KCl eutectic melt at 723 K was determined by using this technique.

• 전기화학회지
• /
• 제13권2호
• /
• pp.110-115
• /
• 2010

The plasticized polymer electrolytes based on polyvinylidene fluoride-co-hexafluoropropylene (P(VdF-co-HFP)), tetra (ethylene glycol) dimethyl ether (TEGDME), and lithium perchlorate ($LiClO_4$) are prepared for the lithium sulfur batteries by solution casting with a doctor-blade. The polymer electrolyte with EO : Li ratio of 16 : 1 shows the maximum ionic conductivity, $6.5\;{\times}\;10^{-4}\;S/cm$ at room temperature. To understand the effect of the salt concentration on the electrochemical performance, the polymer electrolytes are characterized using electrochemical impedance spectroscopy (EIS), infrared spectroscopy (IR), viscometer, and differential scanning calorimeter (DSC). The optimum concentration and mobility of the charge carriers could lead to enhance the utilization of sulfur active materials and the cyclability of the Li/S unit cell.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.57-62
• /
• 2010

The lithium ion concentration dependant ionic conductivity and thermal properties of poly(ethylene glycol) methyl ether methacrylate (PEGMA)/acrylonitrile-based copolymer electrolytes with $LiClO_4$ have been studied by differential scanning calorimetry (DSC), linear sweep voltammetry (LSV) and AC complex impedance measurements. In systems with 11 wt% of acrylonitrile all liquid electrolytes were obtained regardless of lithium ion concentration. Complex impedance measurements with stainless steel electrodes give ambient ionic conductivities $8.1\times10^{-6}\sim1.4\times10^{-4}S cm^{-1}$. On the other hand, a hard and soft films at ambient temperature were obtained in copolymer electrolyte system consists of 15 wt% acrylonitrile with 6 : 1 and 3 : 1 of [EO] : [Li] ratio, respectively. DSC measurements indicate the crystalline melting temperature of poly(PEGMA) disappeared completely after addition of $LiClO_4$ in this system due to the complex formation between ethylene oxide (EO) unit and lithium salt. As a result, free standing film with room temperature ionic conductivity of $1.7\times10^{-4}S cm^{-1}$ and high electrochemical stability up to 5.5V was obtained by controlling of acrylonitrile and lithium salt concentration.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 추계 총회 및 학술발표회
• /
• pp.87-90
• /
• 1998

1. 서론 : 막 분리공정에 사용되고 있는 대부분의 고분자 막들은 침지침강(immersion precipitation) 상변환법에 의해 제조되고 있다. 침지침강 상변환법으로 제조된 막의 최종 구조는 고분자 캐스팅 용액의 열역학적 특성과 비용매와의 속도론적 특성에 따라 대칭형 또는 비대칭형 막구조를 갖게 된다. 고분자/용매로 이루어진 캐스팅 용액에 제3의 성분으로서 PVP, PEG, LiCl. ZnCl$_2$ 와 같은 유.무기물을 첨가시킴으로서 막구조 및 투과성능을 변화시킬 수 있다. 이러한 점에서 이들 첨가제를 pore-forming agent라 부르기도 한다. 본 연구에서는 상대적으로 열적.기계적 특성이 우수하고, 화학약품에 대한 안정성이 뛰어나 상변환 막의 소재물질로서 널리 사용되고 있는 Polyethersulfone(PES)을 막 소재 물질로 사용하여 PES/NMP 캐스팅 용액에 다양한 종류의 무기염[CaCl$_2$, LiCl, LiClO$_4$, Mg(ClO$_4)_2$, ZnCl$_2$]을 PES에 대한 중량비를 달리하여 첨가시켜 비대칭 막을 제조하여 무기염의 첨가가 막구조 형성 및 막투과 특성에 미치는 영향을 연구하였다. 이때 첨가된 무기염 및 첨가 중량비에 따른 영향을 PES/NMP/Salt 계의 coagulation value, light transmittance, 점도 등의 열역학 및 속도론적 특성으로서 설명하였다.

• 방사성폐기물학회지
• /
• 제10권1호
• /
• pp.45-53
• /
• 2012

사용후 핵연료내 우라늄 및 초우란원소를 회수하는 파이로프로세싱 공정에서 배출되는 금속염화물계 방사성 폐기물은 높은 휘발특성과 붕규산계 유리와의 낮은 상용성으로 인해 고화처리가 쉽지 않은 폐기물이다. 이를 위해, 본 연구에서는 고화처리의 한 방법으로 탈염화 반응을 통한 고화체제조 개념을 채택하였다. 솔젤법을 이용하여 탈염화물질, $SiO_2-Al_2O_3-P_2O_5$ (SAP)을 합성하였으며 이를 이용하여 탈염화 반응거동 반응생성물의 고형화 특성을 조사하였다. LiCl계 폐기물과 달리, LiCl-KCl폐기물의 반응은 두 개의 온도범위에서 반응이 진행되며, $400^{\circ}C$의 경우에는 LiCl이, 약 $700^{\circ}C$에서는 KCl이 주로 반응하는 것으로 확인되었다. 여러 가지 반응실험을 통하여 LiCl-KCl의 탈염화 반응에 가장 적합한 물질은 SAP 1071 (Si/Al/P=1/0.75/1 in molar)인 것으로 확인되었다. 4가지 종류의 고형화 실험을 통하여 고화체의 bulk shape과 densification은 SAP/Salt의 비에 영향 받는 것을 확인하였다. 제조된 고형화 시료는 Product Consistency Test-A법을 이용하여 기본적인 내구성을 평가하였다. 본 연구는 $SiO_2$, $Al_2O_3$, $P_2O_5$로 이루어진 탈염화 물질을 이용하여 반응특성과 고형화 특성에 대한 기본적인 정보를 제공하였으며, 이와 같은 실험을 통하여, 본 연구에서 제안된 탈염화 고화처리방법이 휘발특성이 높고 기존 유리매질과 상용성이 낮은 금속염화물계 폐기물에 적용이 가능함을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제17권11호
• /
• pp.1004-1009
• /
• 1996

The interactions between a rod-coil liquid crystalline oligomer, ethyl 4-[4'-oxy-4-biphenylcarbonyloxy]-4'-biphenylcarboxylate with poly(ethylene oxide) (DP=12) (12-4) and LiCF3SO3 have been characterized by using Raman spectroscopy. Band assignments were made comparing the spectrum of 12-4 with those of the poly(ethylene glycol) monomethyl ether(PEGME) (Mw=550) and the ethyl-4'-hydroxybiphenyl-4-carboxylate (EHBPC), which are the coil and mesogen analogues, respectively. Analyzing characteristic bands of the 12-4-salt complex, we have found that the bands belonging to the coil and mesogenic units are changed in both intensities and frequencies. The spectral changes were interpreted from the viewpoint of the complexation between 12-4 and the Li+ ion. However, the possibility that the spectral changes in the mesogenic unit are not due to the complexation with the Li+ ion, but due to the conformational changes by the intercalation of nondissociated LiCF3SO3, is not ruled out.