• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.129-133
• /
• 1997

본 연구에서는 LiNbO$_3$ 단결정 소재의 광손상에 대한 저항성을 향상시키는 첨가물로 잘 알려져 이쓴 MgO 및 ZnO를 첨가하여 육성한 조화용융조성(congruent melting composition)의 LiNbO$_3$ 단결정의 domain 구조는 이들 dopants를 첨가함에 따라 single domain에서 ring 형태의 주기적인 domains으로 변화함을 확인하였고, 첨가된 이온이 domain 형성에 미치는 영향을 전자현미경(SEM-WDS)으로 관찰하였다. 또한, 육성한 [Li1-5xNb5(x-y)Mg(or Zn)5y]Nb1-4x+3yO3 단결정들의 유전율(전이온도) 변화 및 광학적 특성[광투과율, 굴절률]을 측정하여 undoped LiNbO$_3$단결정과 비교하였다. 첨가물을 첨가함에 따라 전이온도는 약 20~3$0^{\circ}C$정도 증가하였으며, 10-3 order의 굴절률 변동치를 나타내었다. 또한, 육성된 결정들의 투과율은 대체로 70~80%를 나타내었고, 첨가물을 첨가함에 따라 흡수단과 OH- 흡수 band는 단파장쪽으로 각각 약 5~10nm, 40nm이동됨을 확인하였다. 이는 LiNbO$_3$단결정의 광손상 저항성이 향상되었음을 간접적으로 보여주는 결과이다.

• 한국세라믹학회지
• /
• 제52권3호
• /
• pp.215-220
• /
• 2015

Phase evolution, microstructure, and microwave dielectric properties of $Li_2O$ and $Al_2O_3$ doped $Zn_{1.9}Si_{1.05}O_4$, i.e., $Zn_{1.9-2x}Li_xAl_x-Si_{1.05}O_4$, ceramics (x = 0.02 ~ 0.10) were investigated. The ceramics were densified by $SiO_2$-rich liquid phase composed of the Li-Al-Si-O system, indicating that doped Li and Al contributed to the formation of the liquid. As the secondary phase, ${\beta}$-spodumene solid solution with the composition of $LiAlSi_3O_8$ was precipitated from the liquid during the cooling process. The dense ceramics were obtained for the specimens of $$x{\geq_-}0.06$$ showing the rapid densification above $1000^{\circ}C$, implying that a certain amount of liquid is necessary to densify. The specimen of x = 0.06 sintered at $1050^{\circ}C$ exhibited good microwave dielectric properties; the dielectric constant and the quality factor ($Q{\times}f_0$) were 6.4 and 11,213 GHz, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.242-242
• /
• 2012

Transparent oxide semiconductors are increasingly becoming one of good candidates for high efficient channel materials of thin film transistors (TFTs) in large-area display industries. Compare to the conventional hydrogenated amorphous silicon channel layers, solution processed ZnO-TFTs can be simply fabricated at low temperature by just using a spin coating method without vacuum deposition, thus providing low manufacturing cost. Furthermore, solution based oxide TFT exhibits excellent transparency and enables to apply flexible devices. For this reason, this process has been attracting much attention as one fabrication method for oxide channel layer in thin-film transistors (TFTs). But, poor electrical characteristic of these solution based oxide materials still remains one of issuable problems due to oxygen vacancy formed by breaking weak chemical bonds during fabrication. These electrical properties are expected due to the generation of a large number of conducting carriers, resulting in huge electron scattering effect. Therefore, we study a novel technique to effectively improve the electron mobility by applying environmental annealing treatments with various gases to the solution based Li-doped ZnO TFTs. This technique was systematically designed to vary a different lithium ratio in order to confirm the electrical tendency of Li-doped ZnO TFTs. The observations of Scanning Electron Microscopy, Atomic Force Microscopy, and X-ray Photoelectron Spectroscopy were performed to investigate structural properties and elemental composition of our samples. In addition, I-V characteristics were carried out by using Keithley 4,200-Semiconductor Characterization System (4,200-SCS) with 4-probe system.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.413-417
• /
• 2018

The $Li_4Ti_5O_{12}$ of anode material for the hybrid capacitor was coated using $CePO_4$, $M_3(PO_4)_2$ (M=Mg, Zn). The capacitance of phosphate coated $Li_4Ti_5O_{12}$ was found to be lower than that of $Li_4Ti_5O_{12}$, whereas the equivalent series resistance was higher than that of $Li_4Ti_5O_{12}$. With an increase in cycle number, the base of cylindrical cell exhibited swelling due to gas generated from the reaction between $Li_4Ti_5O_{12}$ and electrolyte. The swelling cycle number of phosphate coated $Li_4Ti_5O_{12}$ was higher than that of $Li_4Ti_5O_{12}$ due to improvement in electrochemical stability. Based on the results, it is proposed that phosphate coating can be employed as a barrier layer to control the gassing reaction by isolating the $Li_4Ti_5O_{12}$ particle from electrolyte solution.

• 공업화학
• /
• 제17권3호
• /
• pp.274-279
• /
• 2006

해중합 촉매인 zinc acetate ($C_{4}H_{6}O_{4}Zn{\cdot}2H_{2}O{\cdot}0.2\;mol$)와 lithuium hydroxide $H_{2}O$ ($LiOH{\cdot}H_{2}O{\cdot}0.14\;mol$)를 용매인 ethyl alcohol (99.9%)에 용해시킨 후 분산제인 hydroxypropyl cellulose (HPC)를 첨가하여 균일하게 분산된 ZnO (산화아연) 콜로이드 용액을 졸-겔법을 이용하여 합성하였다. ZnO 입자들의 크기와 모양은 분산제인 HPC에 의해 결정되었다. 또한 나노 크기의 ZnO 입자들은 zinc-2-ethylhexagonate를 기초로 한 침천법을 이용하여 얻었다. 이렇게 얻어진 ZnO 분말을 DLS, XRD, FE-SEM, 그리고 UV-Vis를 통하여 특성 분석을 하였다. 그 결과, 산화아연 분말은 자기조립 반응으로 균일하고 육방정계 모양의 구조를 가지는 것을 볼 수 있었다. 또 평균 입자 크기는 거의 40 nm이고 균일하게 분산되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.144-148
• /
• 1993

This paper is a study on electromagnetic wave absorption properties for the composition ratio of Ni-Zn-Fe$_2$O$_4$. Li-Zn-Fe$_2$O$_4$was composed of Fe$_2$O$_3$ 48∼51mo1%, LiO 18 ∼22mo1%, ZnO 34∼27mo1%. and sintering was carried out at 1200$^{\circ}C$. Through the experiments, the resonance phenomenon occured at low frequence range for high permeability, and vice versa. Specialy, In the case of Fe$_2$O$_3$49mol%, NiO 20mo1%, ZnO 3lmol% ,and the matching thickness was 10mm , the absorbing bandwith was 0.35 ∼0.95GHz. Also, In the case of Fe$_2$O$_3$51mo1%. NiO 22mo1%, ZnO 27mol%, we could get the absorbing bandwith of 0.45∼1.2GHz when the matching thickness was 6mm. Therefore. it is proved that electromagnetic wave absorbers with the above bandwidth range can be fabricated successful1y.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.101-102
• /
• 2007

ZnO에 Li과 Al이 codoping된 박막을 magnetron spuuter을 이용하여 사파이어 기판 위에 성장하였다. 성장시킨 박막에 대한 구조적, 전기적, 광학적 특성들을 관찰 하였으며, 증착 분위기 조절에 따라서 에피텍셜한 박막을 얻을 수 있었다. $LiAlO_2$ 도핑농도가 증가함에에 따라 전기적으로는 부도체에 가까운 특성을 나타내면서, 광학 밴드갭 에너지가 증가하는 현상을 관찰할 수 있었다.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2021-2025
• /
• 2010

Electrical and structural properties were investigated on the effects of ZnO and the lead-free NKN-LST ceramics with the addition of ZnO were fabricated by a conventional mixed oxide method. A gradual change in the crystal and microstructure was observed with the increase of ZnO addition. For the NKN-LST-ZnO ceramics sintered at $1050^{\circ}C$, bulk density increased with the addition of ZnO and showed maximum value at addition 2.0mol% of ZnO. Curie temperature of the NKN-LST-ZnO ceramics slightly decreased with adding ZnO. The dielectric constant, piezoelectric constant ($d_{33}$) and electromechanical coupling factor ($k_p$) increased at the small amount of ZnO addition, which might be due to the increase in density. The high piezoelectric properties = 153 pC/N, electromechanical coupling factor = 0.484 and dielectric constant = 2883 were obtained for the NKN-LST+0.5ZnO ceramics sintered at $1050^{\circ}C$ for 2h.

• 자연과학논문집
• /
• 제8권2호
• /
• pp.111-118
• /
• 1996

$Na_2O$-CaO-$SiO_2$ 계 유리의 화학적 내구성을 향상시키면서 작업점도의 변화를 최소화 하기 위하여, 기본 조성 유리를 선정한 후, 이 조성에 $B_2O_3$, ZnO 성분의 첨가량을 변화시키고 $Na_2O$, $Al_2O_3$, $Li_2O$ 성분을 변화시켜가면서 각 성분이 물성에 미치는 영향을 조사하여 최적 조성비를 얻는 것을 목적으로 하였다. 본 실험결과 $Na_2O$-CaO-$SiO_2$계 유리에서 연화점 변화를 최소화하고 화학적내구성을 극대화 시키는 최적조성(wt%)은 다음과 같았다.$B_2O_3$:3.36%, ZnO:2.88%, $Na_2O$:9.93%, $Al_2O_3$, $Li_2O$:0.19%, $SiO_2$:70.56%, CaO:11.22%, $K_2O$:0.14%

• 한국전기전자재료학회논문지
• /
• 제24권7호
• /
• pp.543-546
• /
• 2011

We studied sintering temperature to enhance the piezoelectric properties of $0.98(Na_{0.5}K_{0.5})NbO_3-0.02Li(Sb_{0.17}Ta_{0.83})O_3$+0.01wt%ZnO (hereafter NKN-LST+ZnO) lead free piezoelectric ceramics. The synthesis and sintering method were the conventional solid state reaction method and sintering was executed at $1,080\sim1,120^{\circ}C$. We found that NKN-LST+ZnO ceramics at optimal sintering temperature showed the improved piezoelectric properties at the optimal sintering temperature. The NKN-LST+ZnO ceramics show good performance with piezoelectric constant $d_{33}$= 153 pC/N sintered at $1,090^{\circ}C$. The results reveal that NKN-LST+ZnO ceramics are promising candidate materials for lead-free piezoelectric application.