• Development and Reproduction
• /
• v.5 no.2
• /
• pp.115-122
• /
• 2001

Production of a mature oocyte is a complex process that requires the close association between oocyte and follicular cells. The present study was conducted to investigate the difference between oocytes with and without close junctional communication with cumulus cells and the involvement of two connexins(CXs) in the interactions. Follicles at different sizes(small: 200～400 ㎛; large:>450 ㎛) were mechanically isolated from PMSG-primed mouse ovaries, and punctured to get cumulus-oocyte complex(COC). Oocytes were released themselves(denuded), with partially attached(partial), or with tightly attached(intact) cumulus cells. Maturation and fertilization capacity of the COCs were measured. Expression of CX 37 and CX 43 was examined by RT-PCR and in situ hybridization. The ratio between intact COC and denude/partial oocytes was 30％(SI) and 70％(SPD) in small follicles, while 55％(LI) and 45％(LPD) in large follicles, respectively. Maturation and fertilization rates of the released oocytes were similar among SI, LPD, LI groups, but those were significantly lower in SPD oocytes. In oocytes, CX 37 was the major CX and CX 43 was not expressed, whereas in the cumulus cells, CX 43 was the major, and CX 37 was the next. Results of the present study suggest that 1) immature oocytes from small follicles with intact cell-to-cell communication with cumulus have the similar quality to that of the oocytes from larger follicles, 2) gap junction between oocyte and cumulus cells may be the heterotypic channel, and 3) we could not explain the difference in the cell-to-cell communication between intact and partial/denuded COCs through the expression of the two CXs.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.306-314
• /
• 2023

Stream sediments are an important component of water quality management because they are receptors of various pollutants such as heavy metals and organic matters emitted from upland sources and can be secondary pollution sources, adversely affecting water environment. To effectively manage the stream sediments, identification of primary sources of sediment contamination and source-associated control strategies will be required. We evaluated the performance of machine learning models in identifying primary sources of sediment contamination based on the physico-chemical properties of stream sediments. A total of 356 stream sediment data sets of 18 quality parameters including 10 heavy metal species(Cd, Cu, Pb, Ni, As, Zn, Cr, Hg, Li, and Al), 3 soil parameters(clay, silt, and sand fractions), and 5 water quality parameters(water content, loss on ignition, total organic carbon, total nitrogen, and total phosphorous) were collected near abandoned metal mines and industrial complexes across the four major river basins in Korea. Two machine learning algorithms, linear discriminant analysis (LDA) and support vector machine (SVM) classifiers were used to classify the sediments into four cases of different combinations of the sampling period and locations (i.e., mine in dry season, mine in wet season, industrial complex in dry season, and　industrial complex in wet season). Both models showed good performance in the classification, with SVM outperformed LDA; the accuracy values of LDA and SVM were 79.5% and 88.1%, respectively. An SVM ensemble model was used for multi-label classification of the multiple contamination sources inlcuding landuses in the upland areas within 1 km radius from the sampling sites. The results showed that the multi-label classifier was comparable performance with sinlgle-label SVM in classifying mines and industrial complexes, but was less accurate in classifying dominant land uses (50~60%). The poor performance of the multi-label SVM is likely due to the overfitting caused by small data sets compared to the complexity of the model. A larger data set might increase the performance of the machine learning models in identifying contamination sources.

• Economic and Environmental Geology
• /
• v.22 no.4
• /
• pp.327-339
• /
• 1989

Cassiterite, tantalite, columbite and tantalian rutile are found as accessory minerals in Soonkyoung tin-bearing pegmatites. These minerals occur as finely disseminated specks of up to micro-size in diameter and coarse grain size varying from 0.5-50mm in albite, muscovite and quartz assemblage. Cassiterite geneally shows a moderate to intense pleochroism, having a color brownish yellow to deep reddish brown. The substitution of $Ta^{+5}$, $Nb^{+5}$, $Ti^{+4}$ and Fe* for $Sn^{+4}$ in cassiterite ranges 0.01-0.10 mol%. The zoned cassiterite give a higher Ta/Nb ratios in margin than the ratios in core. This is due to the preferential $Ta^{+5}$ affinity to lower temperature during the crystallization of cassiterite. Tantalite-columbite and tantalian rutile occur in cassitertie with exsolution texture and/or infiltrate into the micro-fissures of cassiterite with micro quartz vein. The compositions of tantalite-columbite show the wide ranges of $Ta_2O_5$ : 14-46 wt.%, $Nb_2O_5$ : 60-28 wt. % and FeO*: 10.15 wt.%. The variation of chemical composition in tantalit-columbite exhibits the decreasing trends of $Mn^{+2}/M^{+2}+Fe^*$ with $Ta^{+5}/Ta^{+5}+Nb^{+5}$ increasing. These trends of vatiations indicate that the Ta/Nb fractionation are enhanced by higher Ta-complex activity in late stage of pegmatite consolidation and lower activity of F in agreements with the F-and Li-micas not to be developed in Soonkyoung tin-bearing pegmatite.

• The Journal of Korean Philosophical History
• /
• no.59
• /
• pp.9-38
• /
• 2018

Joseon Neo-Confucianism had important disputes throughout its hundred years of history. Starting in mid-16th century, Four-Seven Dispute focused on 'Qing (情, emotion)' while Horak Dispute that emerged in early 18th century put emphasis on whether people and things have the same 'Xing (性, nature).' These two disputes lasted until late Joseon. In that process, their issues were clearly recognized and consequently, characteristics of Joseon Neo-Confucianism were well demonstrated. With Western power surging in since mid-18th century, Joseon Neo-Confucianism should develop logic to cope with the Western power. One of responding logics was Zhulilun (主理論, theory of reason) in Neo-Confucianism. Diverse discussions particularly on 'Xin (心, mind)' were expansively made. From the notion of Xin Tong Xing Qing (心統性情) that Xin converges with Xing and Qing, an argument that Xin should be seen as 'Li (理, reason)' and another that Xin is basically 'Qi (氣, force of nature)' were up against each other. The academia heated up with issues raised such as whether Xin and Mingde (明德, bright virtue) are the same notion and whether Mingde should be seen as 'Li' or 'Qi', etc. Defining morality dispute in the late Joseon along with Four-Seven Dispute and Horak Dispute as 'three major disputes in Joseon Neo-Confucianism,' this paper focuses on clarifying their status, actuality and significance. Morality dispute was not only a theoretical dispute. It has significance in the aspect of 'topicality.' It directly and indirectly affected movements against Western and Japanese power, loyal troop's activities and independence movement as well. Compared to Four-Seven Dispute and Horak Dispute, morality dispute is more complex and expansive. In addition, it requires systematic organization of data. Intercomparison of three major disputes is one of key topics to determine characteristics of Joseon Neo-Confucianism.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.1
• /
• pp.22-27
• /
• 2023

This experiment was conducted to confirm the possibility of preparing Sorghum×sudangrass hybrid artificial hay using far-infrared rays in Korea. The machine used in this experiment is a drying device based on far-infrared rays, and is designed to control temperature, air flow rate, far-infrared radiation amount, and air flow speed. The Sorghum×sudangrass hybrids harvested in late September were wilted in the field for one day, and a drying test was performed on them. Conditions for drying were performed by selecting a total of 7 conditions, and each condition induced a change in radiation amount in a single condition (42%) and two steps (4 treatments) and three steps (2 treatments). The speed of the air flow in the device was fixed at 60 m/s, and the run time was changed to 30, 60, and 90 minutes. The average dry matter (DM) content was 82.84%. The DM content was 59.94 and 76.91%, respectively, in drying conditions 1 and 3, which were not suitable for hay. In terms of drying rate, it was significantly higher than 80% in the 5, 6 and 7 treatment, and power consumption was slightly high with an average of 5.7 kw/h. As for the feed value according to each drying condition, the crude protein (CP) content increased as the drying time increased, and there was no significant difference between treatments in ADF, NDF, IVDMD and TDN content. In terms of RFV, treatment 1, which is a single condition, was significantly lower than the complex condition. Through the above results, it was determined that the drying conditions 4 and 5 were the most advantageous when considering the drying speed, power consumption, and quality.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.111-119
• /
• 2013

It is essential and fundamental to extract boundary information of target object via massive three-dimensional point data acquired from laser scanner. Especially extracting boundary information of manmade features such as buildings is quite important because building is one of the major components consisting complex contemporary urban area, and has artificially defined shape. In this research, extended ${\chi}$-algorithm using geometry information of point data was proposed to extract boundary information of building from three-dimensional point data consisting building. The proposed algorithm begins with composing Delaunay triangulation process for given points and removes edges satisfying specific conditions process. Additionally, to make whole boundary extraction process efficient, we used Sweep-hull algorithm for constructing Delaunay triangulation. To verify the performance of the proposed extended ${\chi}$-algorithm, we compared the proposed algorithm with Encasing Polygon Generating Algorithm and ${\alpha}$-Shape Algorithm, which had been researched in the area of feature extraction. Further, the extracted boundary information from the proposed algorithm was analysed against manually digitized building boundary in order to test accuracy of the result of extracting boundary. The experimental results showed that extended ${\chi}$-algorithm proposed in this research proved to improve the speed of extracting boundary information compared to the existing algorithm with a higher accuracy for detecting boundary information.

• BMB Reports
• /
• v.44 no.2
• /
• pp.123-128
• /
• 2011

Leucine-rich repeat containing protein 10 (LRRC10) is characterized as a cardiac-specific gene, suggesting a role in heart development and disease. A severe cardiac morphogenic defect in zebrafish morphants was recently reported but a contradictory result was found in mice, suggesting a more complicated molecular mechanism exists during mouse embryonic development. To elucidate how LRRC10 is regulated, we analyzed the 5'enhancer region approximately 3 kilo bases (kb) upstream of the Lrrc10 start site using luciferase reporter gene assays. Our characterization of the Lrrc10 promoter indicates it possesses complicated cis-and trans-acting elements. We show that GATA4 and MEF2C could both increase transcriptional activity of Lrrc10 promoter individually but that they do not act synergistically, suggesting that there exists a more complex regulation pattern. Surprisingly, knockout of Gata4 and Mef2c binding sites in the 5’enhancer region (-2,894/-2,889) didn't change the transcriptional activity of the Lrrc10 promoter and the likely GATA4 binding site identified was located in a region only 100 base pair (bp) upstream of the promoter. Our data provides insight into the molecular regulation of Lrrc10 expression, which probably also contributes to its tissue-specific expression.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.10
• /
• pp.4331-4338
• /
• 2014

$N^1$-(2, 5-dimethoxyphenyl)-$N^8$-hydroxyoctanediamide (N25) is a novel SAHA cap derivative of HDACi, with a patent (No. CN 103159646). This invention is a hydroxamic acid compound with a structural formula of $RNHCO(CH_2)6CONHOH$ (wherein R=2, 5dimethoxyaniline), a pharmaceutically acceptable salt which is soluble. In the present study, we investigated the effects of N25 with regard to drug distribution and molecular docking, and anti-proliferation, apoptosis, cell cycling, and $LD_{50}$. First, we designed a molecular approach for modeling selected SAHA derivatives based on available structural information regarding human HDAC8 in complex with SAHA (PDB code 1T69). N25 was found to be stabilized by direct interaction with the HDAC8. Anti-proliferative activity was observed in human glioma U251, U87, T98G cells and human lung cancer H460, A549, H1299 cells at moderate concentrations ($0.5-30{\mu}M$). Compared with SAHA, N25 displayed an increased antitumor activity in U251 and H460 cells. We further analyzed cell death mechanisms activated by N25 in U251 and H460 cells. N25 significantly increased acetylation of Histone 3 and inhibited HDAC4. On RT-PCR analysis, N25 increased the mRNA levels of p21, however, decreased the levels of p53. These resulted in promotion of apoptosis, inducing G0/G1 arrest in U251 cells and G2/M arrest in H460 cells in a time-dependent and dose-dependent manner. In addition, N25 was able to distribute to brain tissue through the blood-brain barrier of mice ($LD_{50}$: 240.840mg/kg). In conclusion, our findings demonstrate that N25 will provide an invaluable tool to investigate the molecular mechanism with potential chemotherapeutic value in several malignancies, especially human glioma.

• Journal of Korean Public Health Nursing
• /
• v.12 no.2
• /
• pp.1-11
• /
• 1998

This study was performed to analyze the occupational health nursing of support-project of health management skill for small-scale industries. The 2 subject centers were under the umbrella of Korean Industrial Health Association and data collection period was 2weeks from September 1 to 13. 1997 and time and motion study method was used. Data was handled by SPSS win 7.5 program. results were worked out number. percentage. F-value. (1) The weekly time spending of occupational health nurses was distributed into indoor service 46.9%, outdoor service 26.6%, movement 26.5%. The mean visiting times were 2-3 times per week. and spending time was about 1 hour per industry. (2) There are statistically significant difference among the distribution of time spending according to industrial works(F=23.08. p=.000). and the special education for occupational disease prevention takes the most mean time. (3) There were statistically significant difference among the spending time for the health coach of occupational health nurses(F=188.79. p=.000). and the activity time for workers (58.4%) was more than that of for monitors(41.6%). The frequency of health coachs were 155 times for monitors during two weeks. but health coach for worker was 87 times. As a results. the contents of health coach for workers was proved to take more time than that for monitors. Perhaps we think that monitors has limitation for health management. therefore we should be consider flexible management of visiting time and health coach guidelines for occupational health nurses. (4) There were statistically significant differences among the distribution of time spending according to health coach methods for industrial health nurses(F=66.31. p=.000). The most frequent method of all was guide transmission. 159 times(65.7%), and the mean spending time for instruction was 19.78 min. the longest time. Our suggestion for occupational health nursing of support-project of health management skill for small-scale industry is that the need of each industry is very complex because of various conditions. therefore need assessment for industries should be conducted professionally. And occupational health nurses should apply occupational health nursing process autonomously. and their activities be guaranted by the guideline

• Molecules and Cells
• /
• v.24 no.1
• /
• pp.16-26
• /
• 2007

Wild progenitor species provide potential gene sources for complex traits such as yield and multiple resistances to biotic and abiotic stresses, and thus are expected to contribute to sustainable food supplies. An introgression line 'IR71033-121-15' was derived from a wild species Oryza minuta (2n = 48, BBCC, Acc No. 101141) at IRRI. Introgression analysis using 530 SSR and STS markers revealed that at least 14 chromosomal segments distributed over 12 chromosomes had been introgressed from O. minuta. An $F_{2:3}$ population from the cross between IR71033 and Junambyeo (a Korean japonica cultivar) consisting of 146 lines was used for quantitative trait loci (QTL) analysis of 16 agronomic traits. A total of 36 single-locus QTLs (S-QTLs) and 45 digenic epistasis (E-QTLs) were identified. In spite of it's inferiority of O. minuta for most of the traits studied, its alleles contributed positively to 57% of the QTLs. The other QTLs originated from either parent, IR71033 or Junambyeo. QTLs for phenotypically correlated traits were mostly detected on introgressed segments. Fourteen QTLs corresponded to QTLs reported earlier, indicating that these QTLs are stable across genetic backgrounds. Twenty-two QTLs controlling yield and its components had not been detected in previous QTL studies. Of these, thirteen consisted of potentially novel alleles from O. minuta. QTLs from O. minuta introgression could be new sources of natural variation for the genetic improvement of rice.