• 제목/요약/키워드: Levelling

검색결과 124건 처리시간 0.023초

유한요소해석과 다구찌 방법을 이용한 알루미늄 7001 소재 파이프의 Roller Levelling 공정 최적화 (Optimization of Roller Levelling Process for Aluminum 7001 Pipes with Finite Element Method and Taguchi Method)

  • 허진혁;이형욱;허훈
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2001년도 추계학술대회 논문집
    • /
    • pp.106-109
    • /
    • 2001
  • Process parameters of roller levelling process are intermesh of each roller, roller angle, roller arrangement and shape of rollers. Experimental optimization of these process parameters is very troublesome because of difficulties in evaluating the straightness of pipes to be levelled quantitatively. Finite element method can be a very efficient way to evaluate the straightness of the pipes and therefore to optimize the process. This paper is concerned with simulation and optimization of a roller levelling process. Process parameters of a 14-roller levller for aluminum T9 pipes are optimized with finite element method and Taguchi method. Parameters of significance in roller levelling process and their optimum are obtained.

  • PDF

제주도의 GPS/Levelling 지오이드와 PNU95 지오이드 (Comparison of GPS/Levelling Geoid with PNU95 Geoid in Cheju Island)

  • 최광선;박재희;홍순헌
    • 지구물리
    • /
    • 제3권1호
    • /
    • pp.13-24
    • /
    • 2000
  • 제주도 내의 13개의 수준점에서 GPS를 측정하였으며, 이에 의한 GPS/Levelling 지오이드와 PNU95 지오이드를 비교, 분석하여 보았다. GPS의 측정결과 각. 수준점의 타원체 높이를 ${\pm}3\;cm$ 이내의 정밀도로 측정하였다. 계산된 GPS/Levelling 지오이드는 제주도의 지형 변화를 잘 나타내고 있으며, 제주도에서 지오이드와 지형의 상관식은 다음과 같다. $$N\;=\;0.001082\;{\times}\;h\;+\;25.458\;{\pm}\;0.227\;s.d.$$ 계산된 GPS/Levelling 지오이드와 PNU95 지오이드는 잘 일치하고 있으며 두 지오이드의 RMS 차이는 0.14 m이다.

  • PDF

순차 단순모델을 이용한 전체 인장교정 공정의 탄소성 유한요소해석 (Finite Element Elasto-plastic Analysis of a Full Tension Levelling Process using Sequential Unit Models)

  • 이형욱;허훈;박상래
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2001년도 춘계학술대회 논문집
    • /
    • pp.201-204
    • /
    • 2001
  • The tension levelling process is performed to elongate the strip plastically in combination of tensile and bending strain so that all longitudinal fibers in the strip have an approximately equal amount of length and undesirable strip shapes are corrected to the flat shape. This paper is concerned with a simulation of the tension levelling process based on the analysis of the unit model for the tension leveller. Analysis technique such as the sequential analysis of the nit model is suggested and verified with the assembly analysis of the unit model for the effective and economic analysis of the full set of the tension leveller. Analysis of the full tension levelling process using sequential unit models is carried out and provides the effect of the intermesh and optimum amount of the intermesh in tension levelling process.

  • PDF

GPS/Levelling Geoid of the Southern Korean Peninsula

  • Choi, Kwang-Sun;Lee, Jung-Mo
    • International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
    • /
    • 제25권1호
    • /
    • pp.15-22
    • /
    • 1997
  • The GPS/levelling geoid calculated from GPS survey that data at 123 bench marks represents an appropriate regional geoid of the southern Korean peninsula. The GPS/levelling geoid fits best to the geoid calculated from the EGM96 geopotential model of degree and order to 360 with RMS difference 0.176 m. The good agreement of the GPS/levelling geoid with the EGM96 geoid suggests that the bench mark network is well established in Korea and the EGM96 geopotential model well represents the gravity field in the southern Korean peninsula.

  • PDF

금속인장교정기의 공정변수 설계를 위한 탄소성 유한요소해석 (2)-전체공정 해석 (Plasto-plastic Finite Element Analysis for the Parametric Process Design of the Tension Leveller(2) -Full Set Analysis)

  • 이형욱;허훈;박상래
    • 소성∙가공
    • /
    • 제11권2호
    • /
    • pp.147-154
    • /
    • 2002
  • The tension levelling Process is Performed to elongate the strip plastically In combination of tensile and bending strain so that all longitudinal fibers In the strip have an approximately equal amount ofn length and undesirable strip shapes are corrected to the flat shape. Thus paper is concerned with a simulation of the tension levelling process based on the analysis of tile unit model for the tension leveller. Analysis technique such as the sequential analysis of the unit model is suggested and verified with the assembly analysis of the unit model for the effective arts economic analysis of the full set of the tension leveller. Analysis of the full tension levelling Process using sequential unit models Is carried out for steel strips with the shape defect and provides the effect of the intermesh and optimum amount of the intermesh in tension levelling process.

자기 수평유지 시스템을 위한 변위 적분 피드백제어 연구 (Integrated Displacement feedback Control of a Self-Levelling System)

  • 이영섭;신구균
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 춘계학술대회논문집
    • /
    • pp.504-507
    • /
    • 2005
  • This paper presents a self-levelling system for a mass, which undergoes a severe acceleration, with integrated displacement feedback control. After a general description of such a system, theoretical analysis is investigated to design an active control device. That is, the self levelling system is used to reduce the 'static' deflections while isolating the 'dynamic' vibration. A computer simulation model of 45 kg with two air spring mounts is considered to predict the performance of the control system. The results showed the controller can reduce the mass's displacement to the level of 1/3-1/5. Thus the self-levelling system can be applied usefully to reduce the dispalcement of a mass which experiences a high g dynamics.

  • PDF

우리나라 1등수준망의 조정계산 (Adjustment Computation of the Korean Primary Levelling Network)

  • 이석찬;조규전;고영호;이영진
    • 한국측량학회지
    • /
    • 제5권2호
    • /
    • pp.12-23
    • /
    • 1987
  • 본 연구에서는 국립지리원에서 1974년-1986년에 수행한 우리나라 제 1차 1등수준측량 데이터의 철저한 분석이 이루어졌다. 각 노선별 정확도의 분석과 조정결과의 검토를 통하여 각국의 경우와 비교ㆍ평가되었다. 연구결과로는 수준망에 내재된 정오차가 전반적으로 크게 나타나고 있으나 국제측지학협회(IAG)의 정밀수준측량 정확도를 만족하고 있으므로 지도제작이나 건설공사용으로 타당함을 보여주고 있다.

  • PDF

셀프레벨링 시스템을 위한 변위적분 피드백 제어 연구 (Integrated Displacement Feedback Control of a Self-levelling System)

  • 이영섭
    • 한국소음진동공학회논문집
    • /
    • 제18권12호
    • /
    • pp.1317-1326
    • /
    • 2008
  • This paper presents a self.levelling system for a mass, which undergoes a severe acceleration, with integrated displacement feedback control. After a general description of such a system, theoretical analysis is investigated to design an active control device. The self-levelling system can be used to reduce the "quasi-static" deflection while isolating the "dynamic" vibration. A computer simulation model of 45 kg with two air spring mounts is considered to predict the performance of the control system. Important control parameters were acquired to meet the requirement of the system. The results showed the controller can reduce the displacement of the mass to the level of about 1/5 after control. Thus the self-levelling system can be applied usefully to reduce the displacement of a mass which experiences a high g dynamics.

최신 중력 자료의 획득을 통한 우리나라 지오이드 모델 업데이트 (The Update of Korean Geoid Model based on Newly Obtained Gravity Data)

  • 이지선;권재현;금영민;문지영
    • 한국측량학회지
    • /
    • 제29권1호
    • /
    • pp.81-89
    • /
    • 2011
  • 기존의 우리나라의 지상중력 자료는 지역적으로 편향된 분포를 나타내며, 특히 산악지역에서는 그 분포가 현저히 떨어진다는 문제점이 존재하였다. 이러한 문제점은 GPS/Levelling 자료에서도 나타나며 이로 인하여 지오이드 정확도 향상에 한계가 있었다. 그러나 2008년부터 국토지리정보원에서 수행하고 있는 통합기준점 및 수준점 중력측량사업에서 새로운 중력 자료 및 GPS/Levelling 자료를 획득하였으며, 특히 이러한 자료들은 기존의 중력 및 GPS/Levelling 자료에 비해 월등한 분포와 정밀도를 나타내기 때문에 우리나라 지오이드 모델의 정밀도를 개선하는 기본 자료로 활용될 수 있다. 본 연구에서는 품질이 검증된 기존 자료와 새롭게 획득된 중력 자료를 포함하여 지오이드 모델을 구축하였다. 구축된 지오이드 모델의 정밀도는 새롭게 획득된 927점의 GPS/Levelling 자료와 비교한 결과 약 5.29cm로 나타났으며, 합성지오이드의 적합도 및 정밀도는 각각 약 2.99cm와 3.67cm로 산출되었다. 본 연구를 통하여 산출된 최신 지오이드 모델은 새로운 중력 자료를 포함하기 전에 구축된 모델에 비하여 우리나라 전역에서 약 27% 정도 정밀도가 향상되었으며, 특히 현저히 낮은 분포를 보이던 강원 및 경상지역에서는 중력자료의 업데이트에 의하여 약 42%의 정밀도 향상이 이루어 졌다. 2010년에 통합기준점 사업 및 수준점 측량사업을 통하여 약 4,000여점의 중력 자료와 300여점의 GPS/Levelling 자료가 획득되었기 때문에 향후 본 자료들을 함께 활용한다면 지오이드 모델 정밀도의 향상과 더불어 객관적으로 정밀도 검증이 가능할 것으로 판단된다.

Reuse of Sodium Sulfate Recovered from Farm Drainage Salt as Dyeing Builder of Levelling Dyes - Analysis of Color Difference -

  • Jung, Jiyoon
    • The International Journal of Costume Culture
    • /
    • 제6권1호
    • /
    • pp.11-18
    • /
    • 2003
  • Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California, exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. In searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value-added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The results indicated that sodium sulfate could be produced from the salt and could be purified by a recrystallization method in a temperature range within the highest and lowest daily temperatures in summer in the valley. The recovered sodium sulfate samples, with purities ranging from 67% to 99.91, were compared with commercially available sodium sulfate in the dyeing of levelling dyes. In nylon fabrics, the salt samples had little color difference in the dyeing with C.I. Acid Yellow 23 and C.I. Acid Blue 158. All salt samples' gray scale was 5 grade. In wool fabrics, the salt samples had little color difference in dyeing with C.I. Acid Yellow 23 and C.I. Arid Blue 158. All salt samples' gray scale was 5 grade. Generally, the dyeing of levelling dyes using recovered salts from farm drainage had little color difference than the dyeing of levelling dyes using commercial sodium sulfate.

  • PDF