• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.197-203
• /
• 2014

The safety and arming device(SAD), one of the components of the fuzes, shall provide safety that is consistent with handling, storage, transportation, use, and disposal. In this paper, we describes the design of the SAD which includes the solenoid assembly and the solenoid driving circuit to improve the safety of the fuzes. The solenoid assembly consists of a coil assembly, a restoring spring, and a core. The solenoid assembly is added in the SAD as an additional safety device. In case of the normal circumstances, the core of the solenoid assembly restrains the $1^{st}$ and $2^{nd}$ safety devices of the SAD for those devices not to operate at all, so that the SAD can secure safety for storage, transportation, and use. In contrast, when the battery power is provided to the solenoid driving circuit just before the flight, the core confirms the power level and starts removing the restraint from the $1^{st}$ and $2^{nd}$ safety devices of the SAD, and then the SAD is able to change its mode from safety mode to armed mode. After firing, once the SAD's operations complete, the turned-on arming switch stops providing the power to the solenoid assembly automatically. It can reduce the power consumption at solenoid assembly. Therefore, the proposed solenoid driving circuit for the solenoid assembly not only unlocks the restrained solenoid assembly from the safety devices, but also saves the power consumption during the flight.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.834-843
• /
• 2016

In this paper, the design of a PIN diode S-band transfer-type SP4T including its driver circuit is presented. Each path of the SP4T is composed of the cascade connection of series-shunt PIN diodes to improve the isolation performance. The SP4T is implemented using chip type PIN diodes and a 20 mil AIN substrate fabricated using thin film technology. The driver circuit for the SP4T is designed using a multiplexer and four NMOS-PMOS push-pull pair. From on-wafer measurement, the fabriacted SP4T shows a maximum insertion loss of 1.1 dB and a minimum isolation of 41 dB. The time performance of the driver circuit is evaluated using the packaged PIN diodes with the identical PIN diode chip, and the transition time for on-off and off-on are below 100 nsec. For an input power level of 150 W, the measured insertion loss and isolation are close to those of the on-wafer measurement taking into consideration of the coaxial package mismatch and insertion loss.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.467-478
• /
• 1999

실시간 태스크의 최악 실행시간을 예측할 때 과예측이 발생하는 원인은, 첫째 프로그램의 동적인 최악 실행 행태를 정적으로 분석하는 것이 근본적으로 어렵기 때문이며, 둘째 최근의 RISC 형태 프로세서에 포함되어 있는 파이프라인 실행 구조와 캐쉬 등이 그러한 정적 분석을 더욱 어렵게 만들기 때문이다. 그런데 기존의 연구에서는 각각의 과예측 원인을 해결하기 위한 방법에 대해서만 언급하고 있을 뿐 분석의 정확도에서 각 원인이 차지하는 비중에 대해서는 언급하고 있지 않다. 이에 본 연구에서는 최악 실행시간 예측시 과예측을 유발하는 원인들, 즉 분석 요소들의 영향을 정량적으로 조사함으로써 기존의 최악 실행시간 분석 기법들이 보완해야 할 방향을 제시하고자 한다. 본 연구에서는 실험이 특정 분석 기법에 의존하지 않도록 하기 위하여 시뮬레이션 방법에 기반한다. 이를 위해 분석 요소별 스위치가 포함된 MIPS R3000 프로세서를 위한 시뮬레이터를 구현하였는데, 각 스위치는 해당 분석 요소에 대한 분석의 정확도 수준을 결정한다. 모든 스위치 조합에 대해서 시뮬레이션을 반복 수행한 다음 분산 분석을 수행하여 어떤 분석 요소가 가장 큰 영향을 끼치는지 고찰한다.Abstract Existing analysis techniques for estimating the worst case execution time (WCET) of real-time tasks still suffer from significant overestimation due to two types of overestimation sources. First, it is unavoidably difficult to predict dynamic behavior of programs statically. Second, pipelined execution and caching found in recent RISC-style processors even more complicate such a prediction. Although these overestimation sources have been attacked in many existing analysis techniques, we cannot find in the literature any description about questions like which one is most important. Thus, in this paper, we quantitatively analyze the impacts of overestimation sources on the accuracy of the worst case timing analysis. Using the results, we can identify dominant overestimation sources that should be analyzed more accurately to get tighter WCET estimations. To make our method independent of any existing analysis techniques, we use simulation based methodology. We have implemented a MIPS R3000 simulator equipped with several switches, each of which determines the accuracy level of the timing analysis for the corresponding overestimation source. After repeating simulation for all of the switch combinations, we perform the variance analysis and study which factor has the largest impact on the accuracy of the predicted WCETs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5513-5521
• /
• 2015

There is an operational efficiency problem about wayside equipment applied to the domestic low-density branch as the equipment has been installed and operated similarly in the mainline. On-board oriented train control system, which has been developed for train safety and operation efficiency, ensures safe train operation without expensive ground control signal devices. Such system consists of on-board control system, wayside control system, and local control system. In this paper, the details of tests such as suitability test, communication test, and interface test are described by installing the on-board control system and wayside control system in field. Installation tests include checking power, voltage, cable connection, LED status, etc. Field applicability of the developed system is also verified through the dynamic operation tests with diverse scenarios, which are performed on the virtual line similar to the real environment including switch machine and level crossing gate. Dynamic operation tests were conducted for total 7 scenarios, and several tests were repeated for each scenario. The elapsed time for each operation was computed by analyzing main process log, and we could check that each operation was accomplished within several seconds. Furthermore, the developed system was verified through field test with an accredited institute, and testing certificates were issued.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5534-5540
• /
• 2015

This In the railway signaling system, applications of axle counter in addition to track circuit goes on increasing for detecting train position. Consequently, this paper compares sensor methods of axle counter with between geo-magnetism method and proximity sensor method. And it presents differences and results, to improve reliabilities of train detection and axle counting. Also, this article presents an applied result which is based on field experience, with regard to installation, considering attachment condition of sensor part for accurate axle counting. This study acquires expandability that is able to perform not only axle counting function but also various other functions (direction detection of train, speed detection of train, and so on). It was a result of a change of design in order to judge phase difference of sensors, to improve reliability of axle counting. Furthermore, it does not subordinate to characteristics (type, weight of train). And it is confirmed that the omission of axle counting was not occurred in 350km/h. This was the result of Lab test after the construction of transfer equipment of trial axle and Test Bed for axle counting. Both of them are self-productions. Through this, it prepares foundation which is able to apply not only to train detection but also to speed of passing trains, formation number of trains, detector locking condition - when the train passes the section of switch point, and level crossing devices. Furthermore, it would be judged to contribute safety train operation if proximity sensor method applies to the whole railway signaling system from now on.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.169-180
• /
• 2017

China's mobile communication market has been growing quantitatively and qualitatively since 2000. Currently, it has secured 1.27 billion mobile subscribers and many of the Korean companies try to enter the Chinese market and cooperation with companies in China is being held. Thus understanding of the Chinese markets is the key to better prepare for future international competition. This study is to identify factors affecting switching intentions and behaviors for Chinese mobile subscribers to other mobile service providers by the PPM and it is to derive correlations between strategies of mobile service providers and users' switching intention by the groups classified by ARPU. We conducted a survey targeting 270 Chinese mobile users and analyze it by using Smart PLS 2.0. In conclusion, push effects have positive influence on intention to switching and relational switching cost among mooring effect have significantly negative influence on intention to switching In particular, intention to switching depending on the groups classified by a level of their ARPU have been shown as significantly different. This study will extend theoretical range of PPM theory in explaining users' switching behaviors and contribute to establish strategies to enter the chinese market.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.745-752
• /
• 2016

In the era of the Internet of Things, where all physical objects are connected to the Internet, we suggest a remote control system using a Raspberry Pi single-board computer with ZigBee, which can turn an indoor light-emitting diode (LED) and a multiple-tap on and off, and with a smart phone can control the brightness of the LED as well as an electronic door lock. By connecting an infrared (IR) transmitter module to the Raspberry Pi, we can control home appliances, such as an air conditioner, and we can also monitor indoor images, indoor temperatures, and illumination by using a smart phone app. We developed a method of finding out IR transmission codes required for remote-controllable appliances with an AVR micro-controller. We suggest a method to remotely open and shut an office door by novating the door lock. The brightness level of an LED (between 0 and 10) can be controlled through a PWM signal generated by an ATmega88 microcontroller. A mutiple-tap is controlled using an ATmega32, a photo-coupler, and a TRIAC. The signals for measured temperature and illumination are converted from analog to digital by using the ATtiny44A microcontroller transmitting to a Raspberry Pi through SPI communication. Then, we connect a camera to the CSI head of the Raspberry Pi. We can turn on the smart multiple-tap for a certain period of time, or we can schedule the multi-tap to turn on at a specific time. To reduce standby power, people usually pull out a power code from multiple-taps or turn off a switch. Our method helps people do the same thing with a smart phone, if they are away from home.

• Archives of Pharmacal Research
• /
• v.24 no.6
• /
• pp.546-551
• /
• 2001

We have previously shown that, in circular muscle cells of the lower esophageal sphincter (LES) isolated by enzymatic digestion, contraction in response to maximally effective doses of acetylcholine (ACh) or Inositol Triphosphate ($IP_3$) depends on the release of $Ca^{2+}$ from intracellular stores and activation of a $Ca6{2+}$-calmodulin (CaM)-dependent pathway. On the contrary, maintenance of LES tone, and response to low doses of ACh or $IP_3$ depend on a protein kinase C (PKC) mediated pathway. In the present investigation, we have examined requirements for $Ca6{2+}$ regulation of the interaction between CaM- and PKC-dependent pathways in LES contraction. Thapsigargin (TG) treatment for 30 min dose dependently reduced ACh-induced contraction of permeable LES cells in free $Ca6{2+}$ medium. ACh-induced contraction following the low level of reduction of $Ca6{2+}$ stores by a low dose of TG ($10^{-9}{\;}M$) was blocked by the CaM antagonist, CCS9343B but not by the PKC antagonists chelerythrine or H7, indicating that the contraction is CaM-dependent. After maximal reduction in intracellular $Ca{2+}$ from $Ca6{2+}$stores by TG ($10^{-6}{\;}M$), ACh-induced contraction was blocked by chelerythrine or H7, but not by CCS9343B, indicating that it is PKC-dependent. In normal $Ca^{2+}$medium, the contraction by ACh after TG ($10^{-9}{\;}M$) treatment was also CaM-dependent, whereas the contraction by ACh after TG ($10^{-9}{\;}M$) treatment was PKC-dependent. We examined whether PKC activation was inhibited by activated CaM. CCS 7343B Inhibited the CaM-induced contraction, but did not inhibit the DAC-induced contraction. CaM inhibited the DAC-induced contraction in the presence of CCS 9343B. This inhibition by CaM was $Ca{2+}$dependent. These data are consistent with the view that the switch from a PKC-dependent pathway to a CaM dependent pathway can occur and can be regulated by cytosolic $Ca{2+}$ in the LES.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.12
• /
• pp.1019-1025
• /
• 2021

In nearly all space environments, the solar cell degradation is dominated by protons[1]. Even through a GEO orbit lines in the electron radiation belts, the protons emitted from any solar event will still dominate the degradation[1]. Since COMS launch on June 26 2010, the proton events with the fluence of more than approximately 30 times the average level of perennial observations were observed between January 23 - 29 2012 and March 07 - 14 2012[16]. This paper studies the solar cell degradation by solar proton events in January and March 2012 for the open circuit voltage(Voc) of a witness cell and the short circuit current(Isc) of a section connected to a shunt switch. To evaluate the performance of solar cell, the flight data of voltage and current are corrected to the temperature, the Earth-Sun distance and the Sun angle and then compare with the solar cell characteristics at BOL. The Voc voltage dropped about 23.6mV compare after the March 2012 proton events to before the January 2012 proton events. The Voc voltage dropped less than 1% at BOL, which is 2575mV. The Isc current decreased negligible, as expected, in the March 2012 proton events.

• PNF and Movement
• /
• v.21 no.3
• /
• pp.345-356
• /
• 2023

Purpose: The aim of this study was to investigate the effects of physical therapy combined with a virtual reality (VR) game on pain, quality of life (QOL), engagement, and knee function in post-knee-surgery patients. Methods: Twenty-four patients who had undergone knee surgery four weeks or more before the study were recruited. Two withdrew from the study during the four-week experimental period, and a total of 22 patients were included in the final analysis. Routine physical therapy consisting of electrostimulation (10 min.) and therapeutic massage (10 min.) was the base intervention for all groups. The experimental group (n = 10) was additionally exposed to a VR game intervention, while the control group (n = 12) underwent an intervention involving similar motions as the experimental intervention but with no VR. The intervention for the experimental group used the game Rig Fit Adventure on Nintendo switch. Both groups underwent their respective interventions 3 times a week (35 min. per session) for 4 weeks. Pain was assessed using the numeric rating scale (NRS), and QOL was assessed using the EuroQol five-dimensional five-level questionnaire (EQ-5D-5L). Engagement was assessed using the Korea flow state scale (K-FSS). Finally, knee movement and function were assessed based on knee flexion and extension, range of motion (ROM), and Western Ontario and McMaster Universities Arthritis Index (WOMAC). Results: After the four-week physical therapy, both groups showed significant reductions in pain (on the NRS), increased knee ROM (flexion), better WOMAC scores, and increased EQ-5D-5L scores (p < 0.05), with the experimental group showing significantly better improvements in EQ-5D-5L and K-FSS scores (p < 0.05). Conclusion: The results of this study confirm that a VR-game-integrated intervention is effective for improving pain, QOL, engagement, and knee function in post-knee surgery patients and that VR-game-integrated interventions could be therapeutic alternatives for patients bedridden for prolonged periods with little motivation for rehabilitation.