• 대한토목학회논문집
• /
• 제6권2호
• /
• pp.103-109
• /
• 1986

본(本) 논문(論文)에서는 작용되는 피로하중의 크기에 따른 콘크리트의 피로수명분포를 연구(硏究)하였다. 콘크리트보에 대하여 휨피로 실험을 수행하였으며, 피로응력의 크기는 세 가지로서 정적휨강도의 각각 85%, 75% 및 65%로 하여 피로수명을 측정하였다. 본 연구의 실험결과 피로하중의 크기에 따라 확률분포함수의 형태가 비교적 크게 달라짐을 발견하였으며, 이것은 콘크리트의 피로신뢰해석시 피로하중의 크기에 대한 영향을 고려해야 함을 말해 주고 있다. 분포매개변수의 결정은 도식법, 모멘트법 및 Maximum Likelihood 방법에 의거하였다. 콘크리트의 휨피로수명의 Weibull 분포(分布) 형상매개변수는 하중의 크기에 따라 2.0~4.0의 범위에 있는 것으로 나타났다.

• 한국해양공학회지
• /
• 제1권2호
• /
• pp.123-129
• /
• 1987

Corrosion fatigue fracture of dual phase steel(SS41) and raw material steel(SS41) were investigated in 3.5% NaCl aqueous solution at PH 4,6,9 and 11. The fatigue limit of dual phase steel is increased approximately 1.8 times larger than that of raw material in air. The corrosion fatigue life of dual phase steel is about 5-10 times larger than that of raw material in 3.5% NaCl aqueous solution. The reduction of fatigue life is larger for the acidsalt solution than for the alkali salt solution. The reduction of stress level on the reduction ratio of corrosion fatigue life is large as pH 6-11. The reduction ratio of corrosion fatigue life of dual phase steel and raw material is nearly coincided at pH 2. While at pH4-2 the reduction ratio of corrosion fatigue life only depends on the corrosion effect. It has been found that the corrosion resistance effect of dual phase steel is smaller than that of raw material in corrosion fatigue crack propagation rate. As pH below 6 is changed, it can be clearly observed from raw material that the brittle intergranular fracture is characterized, and from the above result, the influence of corrosion of dual phase steel is small.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1651-1658
• /
• 2001

It is necessary to evaluate fatigue strength and reliability of the connecting rod which is core part in automotive engine to assure the high level of durability of automobile. For this purpose, the loading conditions in automotive engine is obtained by the dynamic analysis. Based on these results, the critical section was identified by the finite element analysis. The fatigue strength under constant amplitude was evaluated and the mean of the fatigue limit at R = -2.27 derived from the staircase method was 311.2MPa. And the failure probability( F$\sub$p/ ) derived from the strength-stress interference model is 0.0003% at the 99.99% confidence level and the mean factor of safety was 4.2.

• 한국멀티미디어학회논문지
• /
• 제23권9호
• /
• pp.1147-1154
• /
• 2020

Nowadays, one of the most common diseases is chronic mental fatigue syndrome. This can be caused by many factors, such as busy life, heavy workload, high population density, and adverse technological impact. Most office workers and students who are sitting all day long while being exposed to this kind of environments are likely to be involved in the mental illness. Therefore, to prevent the illness, it has been highly required to design a device that enables mental fatigue to be monitored continuously without human intervention. This paper proposes a linear regression method to reliably estimating the level of human mental fatigue using wearable physiological sensors, with an estimation error of 0.852. Also, this paper presents an Android application that is able to check mental health conditions in daily life.

• Journal of Korean Biological Nursing Science
• /
• 제20권3호
• /
• pp.187-195
• /
• 2018

Purpose: The purpose of this study was to identify associations among the sleep disturbance, fatigue, job stress, and blood and body fluid (BBF) exposure of shift-work nurses. Methods: A total of 299 shift-work nurses from two tertiary hospitals were enrolled in this study. We used the Insomnia Severity Index (ISI), and the Fatigue Severity Scale (FSS), and the Korean Occupational Stress Scale-Short Form (KOSS-SF) to evaluate sleep disturbance, fatigue, and job stress, respectively. The data were analyzed using t-test or chi-squared test and Logistic regression analysis using the SPSS 23.0 program. Results: We found that 43.8% of participants reported BBF exposure over the past year. Splash or exposure to broken skin of BBF were most frequent (56.9%), and followed by needlestick injuries (30.4%) and sharp injuries (12.8%). Age, hospital, working period, level of stress, sleep disturbance ($ISI{\geq}15$), fatigue (FSS $score{\geq}4$), job demand and organizational climate subset in KOSS-SF were significantly associated with BBF exposure in shift-work nurses. In multivariate analysis after adjusting age and hospital, the risk factors of BBF exposure in shift-work nurses were the level of stress and fatigue (FSS $score{\geq}4$). Conclusion: Fatigue and job stress were related to BBF exposure in shift-work nurses. Our results suggest that management of sleep disturbance, fatigue, and high job stress in shift-work nurses is needed to reduce risk of BBF exposure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.214-219
• /
• 2004

Crack tip behavior of single mode loading condition(mode I)depend on tensile loading component but one of mixed mode loading condition(mode I+II) have influenced on shear loading component like the practical structure. Because crack closure is caused by shear loading component under mixed-mode loading a research on the behavior in the stage of crack initiation and propagation require to be evaluate about crack closure effect by fatigue crack surface friction. For that reasion we examined the behavior at the crack tip by direct measuring method. Measured behavior at the crack tip was analyzed through vector crack tip displacement. As a result, crack propafation equation was corrected by considering with crack closure effect. In addition we compared fatigue fracture crack surface and crack closure level.

• 한국군사과학기술학회지
• /
• 제3권1호
• /
• pp.191-197
• /
• 2000

This paper provides the test results of tracked vehicle at each driving condition and life cycle. Fatigue Damage Spectrum(FDS) has evaluated with the Power Spectrum Density(PSD) and the life time of equipment. Finally, provisional vibration qualification test level is evaluated.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.69-80
• /
• 1993

It is important to prevent roll failure in hot rolling process for reducing maintenance coat and production loss. Roll material and rolling conditions such as the roll force and torque have been intensively investigated to overcome the roll failures. In this study, a computer roll life prediction system under working condition is developed and evaluated on IBM-PC level. The system is composed and fatigue estimation models which are stress analysis, crack propagation, wear and fatigue estimation. Roll damage can be predicted by calculating the stress anplification, crack depth propagation and fatigue level in the roll using this computer model. The developed system is applied to a work roll in actual hot rolling process for reliability evaluation. Roll failures can be diagnosed and the propriety of current working condition can be determined through roll life prediction simulation.

• 한국보건간호학회지
• /
• 제15권2호
• /
• pp.387-397
• /
• 2001

Fatigue is a ubiquitous symptom and is a part of many acute and chronic health conditions. This complex symptom is so prevalence in contemporary society that it motivates a large percentage of the health care-seeking behavior among late-middle aged adults and elders. The purpose of this study was to examine perceptions of fatigue. to identify coping types of fatigue, and to explore factors affected fatigue between middle aged adults and elders who have no critical health problems. The results are as follows: 1. The elderly that manifested high level of fatigue revealed more fatigue than adults. 2. There are three coping types of fatigue. The three types were analyzed by Q-methodology. These three are action-evading, action-limited, and action-oriented. 3. The levels of fatigue manifested by the participants varied significantly according to age, vocation, education, present disease, and income. By identifying the nature of each of the coping types of fatigue, it is recommended to develop an effective nursing interventions for middle aged adults and elders.

• 산업경영시스템학회지
• /
• 제37권1호
• /
• pp.26-32
• /
• 2014

Mental fatigue is inevitable in the workplace. Since mental fatigue can lead to decreased efficiency and critical accidents, it is important to manage mental fatigue from the viewpoint of accident prevention. An experiment was performed to evaluate mental fatigue using the formant frequency analysis of human voices. The experimental task was to mentally add or subtract two one-digit numbers. After completing the tasks with four different levels of mental fatigue, subjects were asked to read Korean vowels and their voices were recorded. Five vowel sounds of "아", "어", "오", "우", and "이" from the voice recorded were then used to extract formant 1 frequency. Results of separate ANOVAs showed significant main effects of mental fatigue on formant 1 frequencies of all five vowels concerned. However, post-hoc comparisons revealed that formant 1 frequencies of "아" and "어" were most sensitive to mental fatigue level employed in this experiment. Formant 1 frequencies of "아" and "어" significantly decrease as the mental fatigue accumulates. The formant frequency extracted from human voice would be potentially applicable for detecting mental fatigue induced during industrial tasks.