• Journal of Korean society of Dental Hygiene
• /
• v.12 no.5
• /
• pp.1049-1058
• /
• 2012

Objectives : It will be necessary to make statement about the competence targeted in the dental hygienic education that adopts the competence-based curriculum from the standpoint of core competence which the students need to be equipped with in the society. Methods : To achieve the education objective of Dental Hygienics, the information available on the website of the Korean Dental Association, universities and graduate schools were used, and the education objectives of the concerned universities which were posted in the websites of 82 universities from July to August, 2011 were analyzed. Results : C7 and C1 accounted for 21.1%, the highest percentage, in the core capability, while HP1 comprised 79.6% in the health improvement and disease prevention. CM1 stood at 73.7%, the highest percentage, in the community involvement(CM) area, and PC4 accounted for 90.8%, the highest percentage, in the patient care(PC) area. In the professional growth and development(PGD) area, PGD1 was the highest, followed by PGD3. In relation to the comments on the occupational types after graduation, 63.1% of respondents mentioned the dental hygienists at the school, while 33.3% did not make any comment on the dental hygienists. Conclusions It was necessary to re-establish the essential objectives of the graduates based on the competence as the accomplishments of studying and learning in the department of dental hygiene. It may be a useful method to set the competency-based education objective on the basis of the implementation ability and the level of graduates.

• Environmental and Resource Economics Review
• /
• v.23 no.4
• /
• pp.667-688
• /
• 2014

This research tested the EKC (Environment Kuznets Curve) Hypothesis using the $CO_2$ Emissions by region and GRDP. We built the panel data set on the 15 local government region from 1990 to 2010 for this analysis. GRDP, population and total factor productivity was considered as the factors influencing on the regional $CO_2$ Emissions. Analysis method in this research is panel GLS model as Lantz and Feng (2006). The results show that the EKC hypothesis did not hold in Korea but there is inverted U relationship between the $CO_2$ Emissions and total factor productivity. As the total factor productivity grows, the $CO_2$ increased but decreased after a certain level.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.570-577
• /
• 2011

In this paper, Policy-based QoS in 3GPP service network management techniques are not applied to the DiffServ technology is applied to the first interpretation. The next PBNM and DiffServ associated technologies by applying QoS performance improvement is verified. In this case that PBNM and DiffServ technology is applied, the amount of voice traffic reduced about 1 msec while best-effort traffic occurs 75 percent of the output link capacity. Also, video traffic which is the same as data traffic showed a decreased $0\sim10^{-4}$ packet loss rate than the case that DiffServ technology is applied. We apply the appropriate policy PBNM and DiffServ QoS mechanisms of the existing set of policies is not affected, just by using the appropriate 3GPP Service QoS level to suit the network operation, management can do that was found. This analytical method based on the University of California at Berkeley through NS-2 DiffServ technology into existing systems and next-generation networks mandated PBNM and DiffServ technology is applied to performance evaluation for the case.

• Korean Journal of Psychosomatic Medicine
• /
• v.2 no.1
• /
• pp.22-33
• /
• 1994

The author presented several points of experienced materials obtained from the joint meetings of consultation-liaison Psychiatric division with oncologic department in Kyung Hee University Hospital. The joint meetings which have been held regularly every other week were very helpful not only for the psychiatrist but also for the cancer department stags to manage the cancer patients actively. The joint meetings have been progressed into more cohesive and active communication as time goes by. Most of the subjects discussed in the meeting was focused on the psychological and behavioral problems of the cancer patients. Besides, the difficulties arising from the chemotherapy were discussed. Probably the most difficult task for the treatment team was to provide complete information while respecting the patient's right to deny their situation The liaison psychiatrist usually gave comments to the charge doctor and/or nusing staff how to evaluate the patient's behavior and what would be the influential factors in developing the doctor-patient relationship. It was found that many cancer patients and their family members had their own peculiar illness behavior and disease concept which led patients to take non-medical or moreover, anti-therapeutic care. The family members were found to play an influential role in the choice of treatment method and progression of the disease. Another role of the liaison psychiatrist in the oncology ward was to encourage the treatment team members. In the practical point of view, it was not easy for the liaison psychiatrist to have time regularly for the cancer patients to encourage the liaison activities. And it seems to be fundamental that the consultation fee for the liaison psychiatrist should be set up at the resonable level.

• Journal of Korea Multimedia Society
• /
• v.20 no.12
• /
• pp.1960-1969
• /
• 2017

There have been ongoing researches to identify and analyze the patterns of electric power IoT data inside sensor nodes to supplement the stable supply of power and the efficiency of energy consumption. This study set out to propose an analysis process for electric power IoT data with the K-means algorithm, which is an unsupervised learning technique rather than a supervised one. There are a couple of problems with the old K-means algorithm, and one of them is the selection of cluster number K in a heuristic or random method. That approach is proper for the age of standardized data. The investigator proposed an analysis process of selecting an automated cluster number K through principal component analysis and the space division of normal distribution and incorporated it into electric power IoT data. The performance evaluation results show that it recorded a higher level of performance than the old algorithm in the cluster classification and analysis of pitches and rolls included in the communication bodies of utility poles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1139-1144
• /
• 2008

In this paper, we propose an automatic generation method of transaction level(TL) model from algorithmic model to verify system specification fast and effectively using virtual platform. The TL virtual platform including structural properties such as timing, synchronization and real-time is one of the effective verification frameworks. However, whenever change system specification or HW/SW mapping, we must rebuild virtual platform and additional design/verification time is required. And the manual description is very time-consuming and error-prone process. To solve these problems, we build TL library which consists of basic components of virtual platform such as CPU, memory, timer. We developed a set of design/verification tools in order to generate a virtual platform automatically. Our tools generate a virtual platform which consists of embedded real-time operating system (RTOS) and hardware components from an algorithmic modeling. And for communication between HW and SW, memory map and device drivers are generated. The effectiveness of our proposed framework has been successfully verified with a Joint Photographic Expert Group (JPEG) and H.264 algorithm. We claim that our approach enables us to generate an application specific virtual platform $100x{\tims}1000x$ faster than manual designs. Also, we can refine an initial platform incrementally to find a better HW/SW mapping. Furthermore, application software can be concurrently designed and optimized as well as RTOS by the generated virtual platform

• Journal of Applied Reliability
• /
• v.18 no.3
• /
• pp.201-207
• /
• 2018

Purpose: To develop the reliability growth planning for a subsystem of guided weapon system using PM2-Continuous model. Methods: The target MTBF of the subsystem is set by allocating the system target MTBF to the lower level, where ARINC method is applied. Other model parameters such as initial MTBF, management strategy ratio and average fix effectiveness factor are chosen from historical growth parameter estimates. Given the values of model parameters, the reliability growth planning curve using PM2-Continuous model is constructed and the sensitivity analyses are performed for the changes of model parameters. Results: We have developed the reliability growth plan for a subsystem of guided weapon system using PM2-Continuous model. It was found that the smaller the ratio of initial MTBF to target MTBF, the smaller the management strategy ratio, the smaller the average fix effectiveness factor, and the shorter the development test period, the higher reliability growth is required. Conclusion: The result of this study will be used as a basis for establishing the reliability growth plan, the test period setting and the budget appropriation for the similar system entering the system development stage in the future.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.1 s.13
• /
• pp.29-40
• /
• 1999

In vector GIS, natural linear entities (called linear entitles) are usually represented by a set of line segments. As an alternative of the line segments, curve segments can be used to represent the linear entities. The curve segments, as one-dimensional spatial objects, we generated by spline interpolation technique such as Bezier technique. In an effort to improve its accuracy in resembling the linear entities, the Bezier technique was modified generating a new technique (called New technique) (Kiyun, 1998). In this paper, validity of the New technique was tested. Test focused on answering two questions: (1) whether or not the curve segments from the New technique replace line segments so as to enhance the accuracy of representations of linear entities, and (2) whether or not the curve segments from the New technique represent the linear entities more accurately than curve segments from the Bezier technique. Answering these two questions entailed two hypothesis tests. For test data, a series of hydrologic lines on 7.5-minute USGS map series were selected. Test were done using t-test method and statistical inferences were made from the results. Test results indicated that curve segments from both the Bezier and New techniques represent the linear entities more accurately than the line segments do. In addition, curve segments from the New technique represent the linear entities more accurately than the line segments from the Bezier technique do at probability level 69% or higher.

• Journal of Biomedical Engineering Research
• /
• v.36 no.3
• /
• pp.61-68
• /
• 2015

In this paper, we studied the effects of intersection angles of the flow-foucusing type droplet generation device inlet channel on droplet diameter using numerical simulation modeling. We modeled different intersection angles with a fixed continuous channel width, dispersed channels width, orifices width, and expansion channels width. Numerical simulations were performed using COMSOL Multiphysics$^{(R)}$ to solve the incompressible Navier-Stokes equations for a two-phase flow in various flow-focusing geometries. Modeling results showed that an increase of the intersection angle causes an increase in the modification of the dispersed flow rate ($v^{\prime}{_d}$), and the increase of the modification of the continuous flow rate ($v^{\prime}{_c}$) obstructs the dispersed phase fluid flow, thereby reducing the droplet diameter. However, the droplet diameter did not decrease, even when the intersection angle increased. The droplet diameter decreased when the intersection angle was less than $90^{\circ}$, increased at an intersection angle of $90^{\circ}$, and decreased when the intersection angle was more than $90^{\circ}$. Furthermore, when the intermediate energy deceased, there was a decrease in the droplet diameter when the intersection angle increased. Therefore, variations in the droplet diameter can be used to change the intersection angle and fluid flow rate.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.1
• /
• pp.73-81
• /
• 2020

Objective: The purpose of this study is to analyze the effects of aquatic walking exercise on gait and balance parameters of elderly women. Method: 15 elderly people were recruited for this study (age: 73.20±5.19 yrs, height: 153.87±3.36 cm, mass: 60.33±5.73 kg). All variables were measured using Gaitview AFA-50. The variables were the heel contact time ratio, gait angle, and M/P change ratio for gait patterns and ENV, REC, RMS, Total Length, TLC, Sway velocity, and Length/ENV for balance abilities. A paired t-test and the Wilcoxon signed-rank test were carried out to verify the differences in the test scores after participating in the water walking program. The significance level for all statistical analyses was set to α=.05. Results: As for the changes in their walking function after the exercise, heel contact time ratio (p<.01) showed a statistical significance, while gait angle and M/P change ratio did not reveal statistically significant differences. In the test of balance ability on both feet and with eyes opened, statistical significance was found in ENV, REC, RMS, TLC (p<.01), and sway velocity (p<.05), while the test with eyes closed showed statistical significance in length/ENV as well as ENV, REC, RMS, sway velocity (p<.01) TLC, and total length (p<.05). As for the single-leg stance balance ability, ENV and REC revealed statistically significant differences. Conclusion: These results show that water walking is effective for improving the function of the ankle flexor muscles, providing stability to the ankle joint during walking and helping efficient walk. In addition, it is also expected to help prevent falls due to loss of balance by improving the stability of lower extremity muscles and trunk.