• Korean Journal of Materials Research
• /
• v.27 no.12
• /
• pp.705-709
• /
• 2017

The electronic and optical characteristics of molybdenum disulphide ($MoS_2$) film significantly vary with its thickness, and thus a rapid and accurate estimation of the number of $MoS_2$ layers is critical in practical applications as well as in basic researches. Various existing methods are currently available for the thickness measurement, but each has drawbacks. Transmission electron microscopy allows actual counting of the $MoS_2$ layers, but is very complicated and requires destructive processing of the sample to the point where it will no longer be useable after characterization. Atomic force microscopy, particularly when operated in the tapping mode, is likewise time-consuming and suffers from certain anomalies caused by an improperly chosen set point, that is, free amplitude in air for the cantilever. Raman spectroscopy is a quick characterization method for identifying one to a few layers, but the laser irradiation causes structural degradation of the $MoS_2$. Optical microscopy works only when $MoS_2$ is on a silicon substrate covered with $SiO_2$ of 100~300 nm thickness. The last two optical methods are commonly limited in resolution to the micrometer range due to the diffraction limits of light. We report here a method of measuring the distribution of the number of $MoS_2$ layers using a low voltage field emission electron microscope with acceleration voltages no greater than 1 kV. We found a linear relationship between the FESEM contrast and the number of $MoS_2$ layers. This method can be used to characterize $MoS_2$ samples at nanometer-level spatial resolution, which is below the limits of other methods.

• The KIPS Transactions:PartD
• /
• v.16D no.1
• /
• pp.113-122
• /
• 2009

Since the traditional pattern mining methods only probe unspecified moving patterns that seem to satisfy users' requests among diverse patterns within the limited scopes of time and space, they are not applicable to problems involving the mining of optimal moving patterns, which contain complex time and space constraints, such as 1) searching the optimal path between two specific points, and 2) scheduling a path within the specified time. Therefore, in this paper, we illustrate some problems on mining the optimal moving patterns with complex time and space constraints from a vast set of historical data of numerous moving objects, and suggest a new moving pattern mining method that can be used to search patterns of an optimal moving path as a location-based service. The proposed method, which determines the optimal path(most frequently used path) using pattern frequency retrieved from historical data of moving objects between two specific points, can efficiently carry out pattern mining tasks using by space generalization at the minimum level on the moving object's location attribute in consideration of topological relationship between the object's location and spatial scope. Testing the efficiency of this algorithm was done by comparing the operation processing time with Dijkstra algorithm and $A^*$ algorithm which are generally used for searching the optimal path. As a result, although there were some differences according to heuristic weight on $A^*$ algorithm, it showed that the proposed method is more efficient than the other methods mentioned.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.4
• /
• pp.259-267
• /
• 2022

The existing method of deriving the fail-safe design requirements for the domestic developed rotary-wing aircraft system may miss the factors that cause critical system function failures, when being applied to the latest integrated avionics system. It is because the existing method analyzes the severity effect of the failures caused by a single item. To solve the issue, we present a systematic analysis procedure for deriving fail-safe design requirements of system architecture by utilizing functional hazard assessment and development assurance level analysis of SAE ARP4754A, international standard for complex system development. To demonstrate that our proposed procedure can be a solution for the aforementioned issue, we set up experimental environments that include common factors that can cause critical function failures of a system, and we conducted a cross-validation with the existing method. As a result, we showed that the proposed procedure can identify the potential critical common factors that the existing method have missed, and that the proposed procedure can derive fail-safe design requirements to control the common factors.

• Journal of dental hygiene science
• /
• v.17 no.1
• /
• pp.12-19
• /
• 2017

The aim of this study was to investigate adult individuals' perceptions on the association between chronic diseases and oral health provide basic data required for motivating individuals to follow ideal oral health behaviors and boost their interests in oral disease prevention and treatment. Subjects in their 20s to 50s were selected through the convenience sampling method and eleven questions were set as factors and answered via self-administered questionnaires. To determine statistical significance, analysis of variance was used with the level of significance set at 0.05. The subjects' perception of the association between chronic diseases and oral health were analyzed with respect to their health behaviors. Individuals with relatively higher stress levels demonstrated higher levels of perception levels (p<0.05). Public education regarding the association between chronic diseases and oral health has not been ideally effective in South Korea. Thus, the general public's perceptions of the association between chronic diseases and oral health should be revised. In addition aspects regarding this matter should be enhanced within oral health education programs which often only focus on demonstrating the importance of oral health management so that individuals can get sufficient information on the association between chronic diseases and oral health.

• The Journal of Korean Medical History
• /
• v.30 no.2
• /
• pp.45-61
• /
• 2017

Objectives : This research aims to investigate the consumer's interest in the Korean Medicine (KM) industry by using Google-trends and Naver-Data lab. A quick and uncomplicated way for those who are already involved with KM industry but do not have expertise in utilizing Big-data searches, is introduced. Methods : 'Direct keyword' was set by FGI (Focus Group Interview) and 'Detailed keyword' was set by using relevant word search and autocomplete search functions in the search engine. By inquiring Naver-Data lab, keyword search volumes are compared by age and sex, date range, and originating region of the researcher. It is possible to determine whether the data is reliable or authentic through examining the associated query. Selected direct keywords used through FGI (Focus Group Interview) were 'Acupuncture', 'Herbal Medicine', 'Cupping', 'Musculoskeletal Disease', 'Diet', and 'Stemina'. Based on these keywords, the following results were derived from the keyword analysis. Results : From August 2016, there was a noticeable surge of interest in men's 'Cupping'. The search for 'Diet' increased in the second quarter of 2016 from all ages. The search volume of 'Stemna' for individuals in their 20s is higher than that of those in their 30s or 40s'. Researchers from the region of Chungcheongbuk-do had a higher level of interest in analgesics and less interest in Korean Medicine. There is a greater interest in the KM market from European countries and America, than from Korea, China, and other Asian countries. Discussion : Despite the limitations of the research, it is meaningful to introduce a quick and easy data search method to compare information by age, sex, and region. Conclusion : The future of research into Korea Medicine and this market is confirmed by our data results which indicate interest from Europe, the United States, and other western countries, but less interest from Korea, China and other Asian countries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8776-8790
• /
• 2015

As a follow-up research of a qualitative study conducted by Lee(2015), this study needed to carry out a quantitative research targeting not a group of experts but of working-level staff and verify the validity of the assessment scales. As far as the study learned from an exploratory factor analysis of the preliminary research, these 12 questions that were incorrectly categorized or that presented outliers had to be removed and as a consequence, the researcher of the study was led to an outcome(75 Items) that would correspond to this factor structure which one had temporarily set up. For the next step, in order to carry out a confirmatory factor analysis, the study worked on verification on a four-stage structural equation model with each of the factors which the researcher had established applied by stage. In the end, a result to confirm how the model's goodness of fit eventually increases with the factors which the researcher had set up added was gained and lastly, another outcome to agree to the hair designers' expertise practice model which the researcher had created was obtained. In the meantime, in terms of the assessment scales which this study has discussed, the study assumes that since the scales accepted a self-rating method, it may lead not only to increase in expertise through self-reflection but also to establishment of a rational class system based on results of objective expertise measuring but not of subjective judgment by superiors.

• The Journal of the Korea Contents Association
• /
• v.17 no.3
• /
• pp.444-453
• /
• 2017

Moral education is essential to the military in fostering elite warriors to have clear sense of their nation and the security, while arming themselves with military spirit that strives for victory. To reach this goal, various moral education has been set forth through boot camp training, academic education, unit training, etc. depending on various subject and supporting agencies in question. Also, in order to heighten the effect of the education, various attempts to combine concert-style cultural activities with the programs are carried out. However, the ultimate goal for this moral education is to facilitate soldiers to voluntarily set their minds and will in combat, and the current education system lacks that motivation as it concentrates mostly on educating knowledges about nationality and security. Under such circumstances, various units have attempted to raise morality in creating many public and media activities within the unit, which proven to be successful. In theory, the usual definitions in the field of education such as emotion, interest, attitude, and personality can be expanded upon with public and media activities. With this in mind, we have researched on how effective this method is by conducting various public and media activities in multiple units, total of 531 soldiers, starting from June to July of 2016. As a result, these activities brought positive effects on young soldiers to build pride in their assigned units, and also increased their willingness to carry out their assignments and missions. Through this research, we drew to the conclusion that unit-level public and media activities, which was solely used for gaining trust and communicate with the general civilians, can be used to boost the soldiers moral strength and help them express the strength in action.

• Journal of the Korean earth science society
• /
• v.41 no.3
• /
• pp.291-306
• /
• 2020

In this study, we developed a learning progression for the structure of the solar system using multi-tier supply form items and validated its appropriateness. To this end, by applying Wilson's (2005) construct modeling approach, we set up 'solar system components,' 'size and distance pattern of solar system planets,' and 'solar system modeling' as the progress variables of the learning progression and constructed multi-tier supply form items for each of these variables. The items were applied to 150 fifth graders before and after the classes that dealt with the 'solar system and star' unit. To describe the results of the assessment, the students' responses to each item were categorized into five levels. By analyzing the Wright map that was created by applying the partial credit Rasch model, we validated the appropriateness of the learning progression based on the students' responses. In addition, the validity of the hypothetical pathway that was established in the learning progression was verified by tracking changes in the developmental level of students before and after the classes. The results of the research are as follows. The bottom-up research method that used multi-tier supply form items was able to elaborately set the empirical learning progression for the conceptualization of the structure of the solar system that is taught in elementary school. In addition, the validity of the learning progression was high, and the development of students was found to change with the learning progression.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.343-351
• /
• 2015

Objective : The purpose of this study was to investigate the effects in the muscle function following 8-week dead-lift training with Whole-body Vibration(WBV) in rehabilitation for sports players. Method : Twenty young sports players. Each subjects were randomly assigned to a resistance training with Whole-body vibration group(TG, n=10), a resistance training without Whole-body vibration group(CG, N=10). The measurements which physical fitness test and joint torque test were performed before the randomization and after the 4-week and 8-week. The WBV group performed the dynamic Dead-lift exercise on a vibration platform during one minute. The CG group performed the equal training without vibration. The WBV and CON group repeated 5 set and trained two times weekly for 8-weeks. Paired t-test was used to test for differences between the groups at baseline and after 4-weeks and 8-Weeks. And independent t-test was used to test for differences between the groups at TG and CG. All analyses were executed using SPSS software 18.0. The level of significance was set at p<.050. Results : Following the 8-Weeks training sessions, an increase in the back-muscle strength was found to be greater for the TG compared with the CG group(p<.05). Muscle endurance was significantly decreased after training than before training only for the CG(p<.05). Isometric Hip/Lumber Extension/Flextion measurement was found to be significantly greater for the TG compared with the CG group(p<.05). The finding indicates that WBV effects as an efficient training stimulus to enhance muscle function by facilitating neural control trail. Following muscle activation in motor unit synchronization of the co-contraction of the muscles. Conclusion : The results imply that the WBV training may have enhanced muscle function in rehabilitation for sports players.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.80-89
• /
• 2000

In this paper, we propose a new CPLD technology mapping algorithm for sequential circuit under time constraints. The algorithm detects feedbacks of sequential circuit, separate each feedback variables into immediate input variable, and represent combinational part into DAG. Also, among the nodes of the DAG, the nodes that the number of outdegree is more than or equal to 2 is not separated, but replicated from the DAG, and reconstructed to fanout-free-tree. To use this construction method is for reason that area is less consumed than the TEMPLA algorithm to implement circuits, and process time is improved rather than TMCPLD within given time constraint. Using time constraint and delay of device the number of partitionable multi-level is defined, the number of OR terms that the initial costs of each nodes is set to and total costs that the$^1$costs is set to after merging nodes is calculated, and the nodes that the number of OR terms of CLBs that construct CPLD is excessed is partitioned and is reconstructed as subgraphs. The nodes in the partitioned subgraphs is merged through collapsing, and the collapsed equations is performed by bin packing so that it fit to the number of OR terms in the CLBs of a given device. In the results of experiments to MCNC circuits for logic synthesis benchmark, we can shows that proposed technology mapping algorithm reduces the number of CLBs by 15.58% rather than the TEMPLA, and reduces process time rather than the TMCPLD.