• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.818-821
• /
• 2005

The sound measurement procedures of IEC 61400-11 are applied to field test and evaluation of noise emission from 1.5 MW wind turbine generator (WTG) at Yongdang and 660 kW WTG at Hangwon in Jeju Island. Apparent sound power level, wind speed dependence and third-octave band levels are evaluated for both of WTGs. 1.5 MW WTG at Yongdang is found to emit lower sound power than 660 kW one at Hangwon, which seems to be due to lower rotating speed of the rotor of WTG at Yongdang. Equivalent continuous sound pressure levels (ECSPL) of 660 kW WTG at Hangwon vary more widely with wind speed than those of 1.5 MW WTG at Yongdang. The reason for this is believed to be the fixed blade rotating speed of WTG at Yongdang. One-third octave band analysis of the measured data show that the band components around 400-500 Hz are dominant for 1.5 MW WTG at Yongdang and those around 1K Hz are dominant for 660 kW WTG at Hangwon.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.4
• /
• pp.186-189
• /
• 2011

PURPOSE. Porcelain fused to metal (PFM) crowns provide the best treatment option for teeth that have a large or defective restoration. More than 20% of teeth with PFM crowns or bridges require non-surgical root canal treatment (NSRCT). This may be due to the effect of restorative procedures and the possible leakage of bacteria and or their by-products, which leads to the demise of the tooth pulp. Thus, this study was planned to compare the ability of the restorative materials to seal perforated PFM specimens. MATERIALS AND METHODS. The study evaluates the ability of amalgam, composite or compomer restorative materials to close perforated PFM specimen's in-vitro. Ninety PFM specimens were constructed using Ni-Cr alloys and feldspathic porcelain, and then they were divided into 3 groups: amalgam (A), composite + Exite adhesive bond (B) and compomer + Syntac adhesive bond (C). All the PFM samples were embedded in an acrylic block to provide complete sealing of the hole from the bottom side. After the aging period, each group was further divided into 3 equal subgroups according to the thermocycling period (one week for 70 cycles, one month for 300 cycles and three months for 900 cycles). Each subgroup was put into containers containing dye (Pelikan INK), one maintained at $5^{\circ}C$ and the other at $55^{\circ}C$, each cycle for 30 sec time. The data obtained was analyzed by SPSS, 2006 using one way ANOVA test and student t-test and significant difference level at (P<.01). RESULTS. The depth of dye penetration was measured at the interfaces of PFM and filling materials using Co-ordinate Vernier Microscope. The lowest levels of the dye penetration for the three groups, as well as subgroups were during the first week. The values of dye leakage had significantly increased by time intervals in subgroups A and C. CONCLUSION. It was seen that amalgam showed higher leakage than composite while compomer showed the lowest level of leakage.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.3
• /
• pp.136-139
• /
• 2011

PURPOSE. A new light curing urethane dimethacrylate and a cold curing resin with simpler and faster laboratory procedures may have even improved flexural properties. This study investigated the 3-point flexural strengths and flexural moduli of two alternate base materials. MATERIALS AND METHODS. A cold curing resin (Weropress) and a light curing urethane dimethacrylate base material (Eclipse). Along with Eclipse and Weropress, a high impact resin (Lucitone199) and three conventional base materials (QC 20, Meliodent and Paladent 20) were tested. A 3-point bending test was used to determine the flexural strengths and flexural moduli. The mean displacement, maximum load, flexural modulus and flexural strength values and standard deviations for each group were analyzed by means of one-way analysis of variance (ANOVA) (with mean difference significant at the 0.05 level). Post hoc analyses (Scheffe test) were carried out to determine the differences between the groups at a confidence level of 95%. RESULTS. Flexural strength, displacement and force maximum load values of Eclipse were significantly different from other base materials. Displacement values of QC 20 were significantly different from Lucitone 199 and Weropress. CONCLUSION. The flexural properties and simpler processing technique of Eclipse system presents an advantageous alternative to conventional base resins and Weropress offers another simple laboratory technique.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1197-1199
• /
• 2003

ROCSAT-2 mission is to daily image over Taiwan and the surrounding area for disaster monitoring, land use, and ocean surveillance during the 5-year mission lifetime. The satellite will be launched in December 2003 into its mission orbit, which is selected as a 14 rev/day repetitive Sun-synchronous orbit descending over (120 deg E, 24 deg N) and 9:45 a.m. over the equator with the minimum eccentricity. National Space Program Office (NSPO) is developing a ROCSAT-2 Image Processing System (IPS), which aims to provide real-time high quality image data for ROCSAT-2 mission. A simulated ROCSAT-2 image, based on Level 1B QuickBird Data, is generated for IPS verification. The test image is comprised of one panchromatic data and four multispectral data. The qualification process consists of four procedures: (a) QuickBird image processing, (b) generation of simulated ROCSAT-2 image in Generic Raw Level Data (GERALD) format, (c) ROCSAT-2 image processing, and (d) geometric error analysis. QuickBird standard photogrammetric parameters of a camera that models the imaging and optical system is used to calculate the latitude and longitude of each line and sample. The backward (inverse model) approach is applied to find the relationship between geodetic coordinate system (latitude, longitude) and image coordinate system (line, sample). The bilinear resampling method is used to generate the test image. Ground control points are used to evaluate the error for data processing. The data processing contains various coordinate system transformations using attitude quaternion and orbit elements. Through the qualification test process, it is verified that the IPS is capable of handling high-resolution image data with the accuracy of Level 2 processing within 500 m.

• Journal of the Korean Home Economics Association
• /
• v.41 no.10 s.188
• /
• pp.75-84
• /
• 2003

The purpose of this study was to examine the effect of listening to music during musical activities on children's development of tone recognition and sense of rhythm. The subjects were total sixty 4-years-olds from two classes of thirty. The children were divided into two groups, experimental and control. Before the experimental procedures, a pre-test was taken to evaluate the level of tone recognition and sense of rhythm of the children. Cordon's 'Audie' was employed and used to measure the difference of tone recognition and sense of rhythm. Then, the activity of listening to music was applied to the experimental group for ten weeks. For the experimental group, the musical activity was selected based on the themes of our tfe which was related to the weekly and yearly teaching plan. One the other hand, no musical activity was provided for the control group. After the experiment, a post-test was carried out using the same methodology of pre-test. Data were analysed by ANCOVA test. Results showed that there was a statistically significant difference in the development of tone recognition and sense of rhythm between the experimental group and the control group.

• PNF and Movement
• /
• v.15 no.1
• /
• pp.41-50
• /
• 2017

Purpose: This study aimed to determine how inclined-treadmill walking training with rhythmic auditory stimulation affects balance and gait in stroke patients. Methods: Ten chronic stroke patients, admitted to B hospital in Gangwon-do between August and October 2015, were trained 5 times per week for 4 weeks; each session lasted 30 minutes. To assess balance and gait before and after the training, the timed up and go (TUG) test, Berg balance scale (BBS), six minute walking test (6MWT), and three-dimensional spatiotemporal gait ability were used to measure the relevant variables. The data were analyzed using the paired t-test, and the statistical significance level was 0.05. Results: There were significant differences in the TUG, BBS, 6MWT, gait speed, cadence, single limb support (SLS), and symmetric index (SI) before and after training (p < 0.05). Conclusion: The results showed that the inclined-treadmill walking training with rhythmic auditory stimulation was effective at improving the balance and walking ability of stroke patients. Hearing training, using one of the basic procedures of proprioceptive neuromuscular stimulation, is considered to be an important aspect.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.111-117
• /
• 2007

This paper presents a new approach to evaluate reliability indices of electric distribution systems using genetic Algorithm (GA). The use of reliability evaluation is an important aspect of distribution system planning and operation to adjust the reliability level of each area. In this paper, the reliability model is based on the optimal load transforming problem to minimize load generated load point outage in each sub-section. This approach is one of the most difficult procedures and become combination problems. A new approach using GA was developed for this problem. GA is a general purpose optimization technique based on principles inspired from the biological evolution using metaphors of mechanisms such as natural selection, genetic recombination and survival of the fittest. Test results for the model system with 24 nodes 29 branches are reported in the paper.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.179-187
• /
• 2013

We describe newly developed software named KPACK for relativistic electronic structure computation of molecules containing heavy elements that enables the two-component ab initio calculations in Kramers restricted and unrestricted formalisms in the framework of the relativistic effective core potential (RECP). The spin-orbit coupling as relativistic effect enters into the calculation at the Hartree-Fock (HF) stage and hence, is treated in a variational manner to generate two-component molecular spinors as one-electron wavefunctions for use in the correlated methods. As correlated methods, KPACK currently provides the two-component second-order M${\o}$ller-Plesset perturbation theory (MP2), configuration interaction (CI) and complete-active-space self-consistent field (CASSCF) methods. Test calculations were performed for the ground states of group-14 elements, for which the spin-orbit coupling greatly influences the determination of term symbols. A categorization of three procedures is suggested for the two-component methods on the basis of spin-orbit coupling manifested in the HF level.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.4
• /
• pp.223-235
• /
• 2020

The purpose of this study is to verify the effect of golf exercise through rehabilitation training for middle-aged women and to suggest the right golf activities. To achieve the purpose of this study, the subjects were 40-50 year old middle-aged women in Jinju, Gyeongnam Province in February 2020. The subjects of this study were 8 women who were controlled by the subjects who needed to be corrected in golf swing orbit. For the accurate measurement test, the program was conducted for 10 days after explaining the purpose and utilization plan of the study. The data collected by testing level of physical strength and distance before and after the experiment were finally analyzed and used. The statistical processing of the collected data was conducted using SPSS win18.0 program, and the statistical techniques were calculated by means of frequency analysis, average(M) and standard deviation(sd), and t-test, one-way ANOVA and multiple regression analysis were conducted. The results of this study through these methods and procedures are as follows. First, rehabilitation training of general characteristics showed a high difference in golf exercise. Second, there was a high difference in the level of rehabilitation training and physical fitness in swing orbit and distance. Third, rehabilitation training and physical fitness level had a high effect on swing orbit and distance.

• Communications for Statistical Applications and Methods
• /
• v.19 no.2
• /
• pp.225-235
• /
• 2012

Noise reduction is an important issue in the field of image processing because image noise worsens the quality of the input image. The basic difficulty is that the noise and the signal are not easy to distinguish. Simple moothing is one of the most basic and important procedures to remove the noise, however, it does not consider the level of noise. This method effectively reduces the noise but the feature area is simultaneously blurred. This paper considers the block approach to detect noise and image features of the input image so that noise reduction could be adaptively applied. Simulation results show that the proposed algorithm improves the overall quality of the image by removing the noise according to the noise level.