• Journal of Radiation Industry
• /
• v.17 no.1
• /
• pp.45-59
• /
• 2023

The transport calculation for a wide variety of radionuclides contained in high-level radioactive waste, especially spent nuclear fuel, is computationally difficult, and input data collection for this also take a considerable amount of time. Accordingly, considering limited resources, it is possible to reduce the calculation time while minimizing impact on accuracy by including only radionuclides important to calculation result through applying some criteria among potential radiation source terms that may release into environment. In this paper, therefore, we reviewed and analyzed the screening process performed to select radionuclides to be considered in the safety assessment for the KBS-3 type repository in Sweden and Finland. In both countries, it was confirmed that a list of radionuclides was selected by comprehensively considering screening criteria such as radioactivity inventory, half-life, radiotoxicity, risk quotient, and transport properties, and etc. A comparison of radionuclides included in the radiological safety assessment in both countries suggests that most of nuclides are considered in common, and a few nuclides considered only in one country are due to differences in decay chain treatment or spent fuel types. As of now, since most of information on the disposal facility in Korea has not been determined, it is necessary to comprehensively model release and transport of all radionuclides considered in Sweden and Finland when performing the radiological safety assessment. Based on these results, we derived the screening concept of selecting a list of radionuclides to be considered in the radiological safety assessment for the domestic KBS-3 type geological disposal facility, and this result is expected to be used as technical basis for confirming conformity with the safety objective. In a more detailed evaluation reflecting domestic characteristics in the future, it would be desirable to consider only radionuclides selected in accordance with the screening procedure. However, further research should be conducted to determine the quantitative limit for each criteria.

• Journal of Environmental Impact Assessment
• /
• v.4 no.2
• /
• pp.131-149
• /
• 1995

The object of this study is to suggest some alternatives for environmental management towards sustainable urban development of Chongju city in Korea. This study analyses urban environmental indicators (population density, land use, road, park, car, etc.), level of air and water pollution and solids waste generation by comparing Chongju city and other large cities. Some alternatives towards sustainable development in Chongju city would be summerized and suggested as higher concentrated land use(compact city), mixed land use, supply of mass transit, establishment of regional environmental standards, total emission regulation of air and water pollutants, the preparation of Local Agenda21 of Chongju, and the introduction of strategic environmental assessment(SEA) into environmental impact assessment.

• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.63-71
• /
• 1995

This study analyzes the problems of environmental laws, development planning laws, Metropolitan Area Development Planning (MADP), and the level of environmental pollution at Asan-bay metropolitan area, where MADP will be realized in the near future. In order to prevent environmental pollution by the implementation of MADP, the Environmental Impact Assessment (EIA) Act and EIA systems in Korea should be revised so as to reflect the followings. First, the impact of national landuse planning changes on the environment should be considered at the beginning of the EIA procedures. Second, the overlapping and greater impact of many projects upon surrounding metropolitan areas should be simultaneously evaluated, though each project is the subject of EIA, and the environmental pollution protection and abatement alternatives must be made in accordance with the above impact of the projects. Thirdly, total effluent regulation of water pollution, air pollution and solid wastes should be enforced based on the self-purification of the metropolitan area environment.

• Computers and Concrete
• /
• v.18 no.1
• /
• pp.69-97
• /
• 2016

Performance-based remaining life assessment of reinforced concrete bridge girders, subject to chloride-induced corrosion of reinforcement, is addressed in this paper. Towards this, a methodology that takes into consideration the human judgmental aspects in expert decision making regarding condition state assessment is proposed. The condition of the bridge girder is specified by the assignment of a condition state from a set of predefined condition states, considering both serviceability- and ultimate- limit states, and, the performance of the bridge girder is described using performability measure. A non-homogeneous Markov chain is used for modelling the stochastic evolution of condition state of the bridge girder with time. The thinking process of the expert in condition state assessment is modelled within a probabilistic framework using Brunswikian theory and probabilistic mental models. The remaining life is determined as the time over which the performance of the girder is above the required performance level. The usefulness of the methodology is illustrated through the remaining life assessment of a reinforced concrete T-beam bridge girder.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.418-419
• /
• 2006

After electricity power industry restructuring, "Long term power development plan", setting up by government, is replaced by "Basic plan of electricity supply and demand". In this basic plan, one of the most important factors is assessment of appropriate capacity margin. The benefit of GENCO is decided by the market price, and the price is largely affected by the level of reserve margin. As a consequence, appropriate reserve margin is determined by market power. However, Cost Based Pool(CBP) is a limited competitive market, and government policy for supply and demand is very important factor or reserve margin determination. This paper points out issues about existing reserve margin assessment method which is used in basic plan and suggests improved assessment method. In the case study, capacity margin is calculated by proposed assessment method and result shows the advantages of suggested method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.4
• /
• pp.5-14
• /
• 2006

The correct and opportune decision of reengaging the intercepted target is required in order to enhance the engagement performance of the surface to air missile systems that has the ability to defense or attack against various targets at the same time. The engagement efficiency and success of these systems will be largely enhanced by assigning quickly its system resources to the intercepted target and minimizing the waste of system resources for the target which is not able to attack any more. The kill-assessment algorithm has to be able to evaluate automatically whether various targets intercepted by missiles are killed or not on the basis of the reasonable confidence level. The definition of kill assessment is discussed and the kill assessment algorithm is designed reliably by using Kalman filter and a probability theory. Finally its performance is evaluated and analyzed by the Monte Carlo simulation.

• Journal of Engineering Education Research
• /
• v.18 no.6
• /
• pp.24-31
• /
• 2015

The purpose of this study is to develop the model of course evaluation design for CEA(Course-Embedded Assessment), which is focused on course level for assessment reliability. This study was conducted by the process of model development and validation according to Richey & Klein(2007)'s model development methodology. The model of this study was comprised with the three steps of learning objectives based on course outcome, assessment design and goal achievement analysis of course, which were explained by specific design principles. Also, this model was validated by two steps, which one was on the inner validation and the other was the outer validation(Richey & Klein, 2007). Considerations for designing the model of course evaluation have been suggested and a few implications were discussed.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2006.11a
• /
• pp.34-45
• /
• 2006

Chemical toxicants are metabolically converted to numerous metabolites in the body. Toxicokinetic characteristics of metabolites could be therefore used as biomarker of exposure for human risk assessment. Biologically based dose response (BBDR) model was proposed for future direction of risk assessment. However, this area has not been developed well enough for human application. Benzo(a)pyrene (BP), for example, is a well-known environmental carcinogen and may produce more than 100 metabolites and BPDE-DNA adduct, a covalently bound form of DNA with benzo(a)pyrene diolepoxides (BPDES), has been applied to qualitatively or quantitaively estimate human exposure to BP. In addition, di(2-ethylhexyl) phthalate (DEHP), a widely used plasticize. in the polymer industry, is one of endocrine-disrupting chemicals (EDCs) and has been monitored in humans using urinary or serum concentrations of DEHP or its monomer MEHP for exposure and risk assessment. However, it is difficult to estimate the actual level of toxicants using these biomarkers in humans using. This presentation will discuss a methodology of exposure and risk assessment by application of metabolic profiling kinetics.

• Geomechanics and Engineering
• /
• v.21 no.2
• /
• pp.143-152
• /
• 2020

Korean society experienced successive earthquakes exceeding 5.0 magnitude in the past three years resulting in an increasing concern about earthquake stability of urban infrastructures. This study focuses on the significant aspects of earthquake risk assessment for the cut-and-cover underground railway station based on two-dimensional dynamic numerical analysis. Presented are features from a case study performed for the railway station in Seoul, South Korea. The PLAXIS2D was employed for numerical simulation and input of the earthquake ground motion was chosen from Pohang earthquake records (M5.4). The paper shows key aspects of earthquake risk for soil-structure system varying important parameters including embedded depth, supported ground information, and applied seismicity level, and then draws several meaningful conclusions from the analysis results such as seismic risk assessment.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.219-227
• /
• 2012

Daily solar radiation is essential for water resources planning and environmental impact assessment. However, radiation data is not commonly available in Korea other than in big cities, and there has been no direct measurement for rural areas where water resources planning and environmental impact assessment is usually most needed. In general, missing radiation data is estimated from nearby regional stations within a certain distance, and this study compared two dominant methods (modified Angstrom equation and transmittance interpolation method) at six stations in Nakdong River watershed area. Two methods shows a similar level of accuracy but the transmittance interpolation method is likely to be superior in that there is no need for any measurement element since the modified Angstrom equation require the sunshine hour measurement. This study will contribute to improve water resource and water quality management in Nakdong River watershed.