• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.1291-1292
• /
• 2005

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.808-817
• /
• 2006

There were huge damages of human beings and their properties in many areas of the basin of the Nak-Dong river by the unusual weather and the localized downpour recently. In this research against disasters, we want to know the special quality of strength of the cemented sand that is mixed with cement and poor-graded sand which is the materials of riverbed in the basin of the Nak-Dong river as levee's material. For that, we want to provide the fundamental data which need in the examination of adaptation of levee's material, design and analysis by investigating compressive strength by curing period and cement ratio, elastic modulus and stress by transformation from compaction test, CBR test, unconfined compression test, triaxial compression test as changing ratio of sand and cement from 2% to 8% at two points in the basin of the Nak-Dong river.

• Journal of Wetlands Research
• /
• v.4 no.1
• /
• pp.43-50
• /
• 2002

The channel improvement plan has contributed to the flood damage reduction studies and the plan has mainly performed by the levee construction which creates the cut river. The cut river has mainly used as the agricultural and housing purposes. Recently, however, it is considered as a natural wetland for the purposes of a flood control and preservation of nature. So, this study compares the economical benefits according to the purposes of the cut river utilizations such as an agricultural, levee construction for flood damage reduction, and wetland. The study area is the downstream part of Kok-Neung stream which is a main tributary of Han river. The agricultural and levee construction benefits are estimated based on the 'Agricultural and Forestry Statistical Year' (2000) and the 'Standard for River Design' (2001). The benefit or value for the wetland utilization of the cut river is estimated by the enquete using questionnaire. As a results, for the case of which the cut river is used as an agricultural land, the present net benefit is estimated as 195.81 million won, for the levee construction, as 20853.00 million won and for the wetland, as 24692.89 million won. Therefore, the wetland is the best choice for the cut river utilization.

• Journal of Convergence for Information Technology
• /
• v.9 no.11
• /
• pp.125-133
• /
• 2019

In this paper, probabilistic flood risk maps were produced for levee break caused by possible flood scenarios. The results of the previous studies were employed for flood stages corresponding to hydrological extreme event quantified uncertainties and then predicted the location of a levee breach. The breach width was estimated by combining empirical equation considered constant width and numerical modeling considered uncertainties on compound geotechnical component. Accordingly, probabilistic breach outflow was computed and probabilistic inundation map was produced by 100 runs of 2D inundation simulation based on reliability analysis. The final probabilistic flood risk map was produced by combining probabilistic inundation map based on flood hazard mapping methodology. The outcomes of the study would be effective in establishing specified emergency actin plan (EAP) and expect to suggest more economical and stable design index.

• Journal of Korea Water Resources Association
• /
• v.49 no.9
• /
• pp.773-787
• /
• 2016

A coupled river-overland hydrodynamic model was applied to estimate flood risk by a scenario-based approach. The study area is Seongseo Industrial Complex in Daegu which is located near Nakdong river and Geumho river. Inundation depth and velocity at each time were calculated by applying a coupled 1D/2D hydrodynamic model to the target area of interest. The 2D inundation analysis for river and overland domain was performed with the scenario-based approach that there are levee overflow against 100/200 year high quantile (97.5%) design flood and levee break against 100/200 year normal quantile (50%) design flood. The level of flood risk was displayed for resident/industrial area using information about maximum depth and velocity of each node computed from the 2D inundation map. The research outcome would be very useful in establishing specified emergency action plans (EAP) in case of levee break and overflowing resulting from a flood.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.124-143
• /
• 2010

Cofferdam is a temporary levee or dam structure built by using sheet pile or earth materials to prevent water infiltration during construction work of bridge, dam, harbour dock, or hydraulic structures in the river. In this regard, it is required to secure cutoff ability for dry work and workability for rapid installation and removal of the temporary dam or levee structures. In this paper, case studies for design and construction of cofferdam were performed, and water diversion method was briefed with some examples of cofferdam type as well. For the case study details of design and construction were reviewed based on cofferdams under construction related to 16 submerged weirs of "The 4-river restoration project" and dam type cofferdam respectively. From the review, it was known that the method for changing the water flow is selected based on the data from geological and geo-hydraulic site investigation in order to mitigate environmental effects by making sure if the design cross-sectional area of flow and maximum working days are sufficiently guaranteed. Finally, the primary findings and main conclusion derived are summarized that determination of applicable type of cofferdam should be checked by case study and meet design requirements such as water inflow control, constructability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.481-487
• /
• 2020

This study examined the behavior change of river levees during an earthquake by numerical analysis. Unlike conventional research using artificial earthquake waves, earthquake analysis was performed using real earthquake waves. The behavior of a river levee before and after an earthquake was compared and analyzed quantitatively. Studies show that the river levee has a safety factor of approximately 28.5% due to an earthquake. On the other hand, the minimum standard safety factor is satisfied. Vertical effective stress has decreased by 81.8% due to excess pore-water pressure generated by the earthquake. In addition, liquefaction occurs in most of the foundation soil. An examination of the stress-displacement behavior due to the earthquake revealed a large amount of settlement in the backfill layer. Most of the foundation soil yielded. Therefore, the target river levee is quite vulnerable to earthquakes. Through the results of this study, the necessity of refreshing the seismic design standards for river levees is required. This study can be used as basic data for estimating the approximate damage level and vulnerable areas.

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.1077-1087
• /
• 2015

The levee protect lifes, houses, and properties by blocking overflow of river. The revetment is forced to be covered on the slope of levee in order to prevent erosion. The stability of revetment is very important enough to directly connected to the stability of levee. In this study, the weak points of revetment on meandering channel were found by movable revetment experiment and the velocity and the water surface elevation (WSE) were measured at main points. The 3-D numerical simulations were performed under same conditions with experiment. And unclear flow characteristics by the limit of measuring instruments were analyzed through numerical simulation. Consequently, the section of large wall shear stress and the failure section are almost the same. Despite of small wall shear stress, the revetments located at right bank were carried away because of circulation zone due to secondary flow by meandering. With existing riprap design formula, the sizes of riprap determined using maximum local velocity were 1.5~4.7 times greater than them using mean velocity. As a result of this study, it is necessary to calculate the size of riprap in other ways for meandering and straight channel. At a later study, if the weighted value considered the radius of curvature and shape of hydraulic structure is applied to riprap design formula, it is expected that the size of revetment was evaluated rationally and accurately.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.17-25
• /
• 2016

Revetments help protect levee slopes from erosion. If the design of the revetment is not appropriate, the levee may collapse as a result of scouring due to the strong flow velocity and tractive force. Therefore, when designing a revetment, it is very important to calculate the representative velocity. However, the average velocity and depth calculated by 1-D varied flow analysis are generally applied to the design, which do not reflect the increase in velocity caused by the free and force vortex. Therefore, it is necessary to correct the representative velocity in order to ensure the stability of the revetment in a meandering channel. In this study, the applicability of the method of calculating the representative velocity considering the curve and scour was studied (by comparing it with) the average and maximum velocities determined by numerical simulation. The representative velocity corrected for the effect of the curve and scour and the maximum velocity calculated by the numerical simulation were found to match quite well. In addition, the riprap size of the gabion in the meandering and straight channels were compared by applying them to the conventional design formulas. In the future, it is necessary to perform additional numerical simulations for various rivers with different characteristics, in order to propose a method of designing a suitable revetment for Korean characteristics. At this time, the results of this study are expected to be able to be used as basic data.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.4
• /
• pp.43-52
• /
• 2006

There were huge damages of human beings and their properties in many areas of the basin of the Nak-Dong river by the unusual weather and the localized downpour recently. In this research against disasters, we want to know strength of the cemented sand that is mixed with cement and poor-graded sand, to estimate CSG(Cemented Sand and Gravel) method used coffer dam in Japan, which is the materials of riverbed in the basin of the Nak-Dong river for levee's construction. For that, we want to provide the fundamental data which need in the examination of adaptation of levee's material, design and analysis by investigating compressive strength by curing period and cement content, elastic modulus and stress by transformation from compaction test, CBR test, unconfined compression test and triaxial compression test as changing cement content from 2% to 8% at two sites in the basin of the Nak-Dong river.