목적: 국제표준에서 규정한 청색광위험함수를 도입하여 청색광차단렌즈에 대한 청색광차단율과 시감투과율을 평가한다. 방법: 8개사 총41종의 청색광차단렌즈에 대한 청색광차단율과 시감투과율을 구하기 위해 UV-VIS 분광광도계로 380~780 nm 범위에서의 분광투과율을 측정하였다. 청색광차단율은 ANSI Z80.3:2010 및 ISO 13666(한국표준 KS B ISO 13666:2004)에서 규정된 청색광위험함수를 도입하여 산출하였다. 결과: 전체 렌즈에 대한 청색광차단율 범위는 9.3%~96.8%, 투과율 범위는 53.5%~92.7%, 시감투과율 범위는 58.0%~98.1%이었다. 전반적으로 코팅 청색광차단렌즈는 시감투과율이 높은 경향이 있었고, 착색 청색광차단렌즈는 청색광차단율이 높은 경향이 있었다. 결론: 렌즈분광분포곡선의 분석으로부터 청색광차단렌즈의 성능을 향상시킬 수 있는 가능성이 있음을 확인할 수 있었다. 제조업체는 국제표준의 규정에 맞춰 성능을 평가할 수 있는 자체기술을 확보할 필요가 있다.
Jeon, Hwa Joon;Park, Gyeungju;Gwag, Jin Seog;Lee, Jong Hoon;Kwon, Jin Hyuk
Journal of the Optical Society of Korea
/
제18권4호
/
pp.345-349
/
2014
A direct-lit color-matching liquid crystal display using a lenticular lens array with grouped lens elements that image linear RGB light sources on the RGB subpixels of a color filter to enhance transmittance is designed, simulated, and fabricated. The RGB LED linear light sources were fabricated using small RGB LEDs in a linear array arrangement, and the lenticular lens array consisted of eight units of the same structure with a gap of 2.19 mm. The optical transmittance of the liquid crystal panel was improved by as much as 240% due to the color matching.
Antireflection pattern, moth-eye structure, was fabricated on lens using Ultra Violet nanoimprint lithography and flexible template. Ni template with conical shaped structure was used as a master template to molding. The flexible poly vinyl alcohol template was fabricated by molding. This poly vinyl alcohol template was used as an imprint template of imprint at lens. Using Ultra Violet nanoimprint lithography and poly vinyl alcohol template, polymer based moth-eye structure was formed on lens and its transmittance was increased up to 94% from 92% at 550 nm wavelength.
목적: 4-iodoaniline을 포함한 하이드로젤 콘택트렌즈 기본 재료에 티타늄 실리콘 산화물 나노입자를 첨가하여 친수성 착색 콘택트렌즈의 물리적 및 광학적 특성을 측정하고 제조된 고분자의 자외선 투과율을 측정하여 티타늄 실리콘 옥사이드 나노입자의 자외선 차단 안의료용 렌즈 소재로의 활용도 및 4-iodoaniline만을 기본 콘택트렌즈 재료에 공중합하여 두 실험군의 물성을 비교 분석하였다. 방법: 하이드로젤 렌즈 제조를 위해, HEMA, MA, MMA, 4-iodoaniline, 교차결합제인 EGDMA 및 개시제인 AIBN을 사용하여 공중합 하였다. 또한, 티타늄 실리콘 옥사이드 나노입자는 첨가제로 사용되었다. 중합 후 제조된 콘택트렌즈 재료의 함수율, 굴절률, 접촉각 및 분광투과율 등의 물리적 특성을 측정하였다. 결과: 하이드로젤 렌즈 고분자의 물성을 측정한 결과, 함수율 35.01~ 38.68%, 굴절률 1.4350~1.4418, 접촉각 $34.15{\sim}57.25^{\circ}$ 그리고 UV-B 투과율의 경우 1.0~10.0%의 범위로 나타났다. 또한 첨가제를 사용하지 않은 실험군에서는 함수율 34.0~36.8%, 굴절률 1.4378~1.4420, 접촉각 $40.15{\sim}60.16^{\circ}$ 그리고 UV-B 투과율의 경우 1.8~25.0% 범위의 분포를 나타내었다. 결론: 티타늄 실리콘 옥사이드 나노입자를 첨가한 조합에서 자외선 투과율이 크게 감소하는 것으로 나타났다.
본 연구의 목적은 콘택트렌즈의 재료로 사용되는 실리콘 고분자를 합성하여 실리콘 재질의 가스 투과성 콘택트렌즈의 함수율과 광 투과성의 문제를 해결하는 데에 있다. 실험에 사용된 monomer들로는 NVP(N-vinly-pyrrolidone), MMA(methyl methacrylate), HEMA(Hydroxyethylmethacrylate)등과 교차결합제로 EGDMA(Ethylene Glycol Dimethacrylate)를 사용하였으며, 또한 콘택트렌즈 제조의 가장 좋은 조건을 위한 많은 조합 공식을 토대로 중합한 후, 중합된 개체를 가지고 함수율 측정과 광투과율 측정을 실시하였다. 본 실험의 연구 결과 재질의 투명성과 함수율을 동시에 추구하는 고분자를 합성하였고 그들의 물성을 측정하였다.
Multi coating과 no coating으로 처리된 국산 안경렌즈와 외국산 안경렌즈를 가시광선 영역에서 투과율을 조사하였다. No Coating된 렌즈는 약 93%의 투과율을 나타내었으며, Coating된 렌즈는 대부분 98% 이상의 투과율을 나타내었다. 특히 외국 한 회사의 제품은 전 영역에 걸쳐 투과율이 균일함을 알 수 있었다.
ZnO nanoparticles and vinyl pyridine were added to the mixture of MMA (methyl methacrylate), HEMA (2-hydroxy ethyl methacrylate) and NVP (N-vinylpyrrolidone) in a mould at various concentrations. Cross-linker EGDMA (ethyleneglycoldimethacrylate) and AIBN (azobisisobutyronitrile) initiator were finally added to the mixture and then heated at $80^{\circ}C$ for 60 min to prepare high-performance hydrogel ophthalmic lens. The physical properties of the hydrogel ophthalmic material were investigated by measuring the average value of refractive index, water content and optical transmittance. The refractive index of 1.429~1.450, water content of 34~41%, and visible transmittance of 78~90% were obtained. The material is possibly used to manufacture UV-block hydrogel contact lens.
A high directivity TIR (total internal reflection) lens in the UV-A region was designed using a silicone resin, and a UV light source module with a maximum irradiation density of $150mW/cm^2$ was fabricated. The beam angle of the TIR lens was designed to be $8.04^{\circ}$ and the maximum diameter of the TIR lens was Ø13.5. A silicone resin having a UV transmittance of 93% and a refractive index of 1.4 at a wavelength of 365 nm was used, and the lens was manufactured using an aluminum mold, from which silicone could be easily released. The module was fabricated in a metal printed circuit board of COB (chip on board) type using a $0.75{\times}0.75mm^2$ UV chip. A jig was used to adjust the focal length between lens and chip and to fix the position of the lens. The optical characteristics such as illumination distributions of the lens and module were designed using 'LightTools' optical simulation software. The heat dissipation system was designed to use a forced-air cooling method using a heat-sink and fan.
목적: 가열에 의한 플라스틱 렌즈의 변화를 연구하고자 하였다. 방법: -2.00D의 플라스틱 렌즈를 60-100$^{\circ}C$의 온도로 가열한 후 렌즈 굴절력의 변화, 표면 상태의 변화, 투과율의 변화를 조사하였다. 결과: 70$^{\circ}C$에서 1시간, 75$^{\circ}C$에서 10분, 100$^{\circ}C$에서 10초가 렌즈 표면의 변화를 일으키는 시작점으로, 가열온도가 높을수록, 중굴절률렌즈보다 고굴절률렌즈에서 균열이 더 심하게 발생되었다. 투과율은 균열의 정도가 심해짐에 따라 감소되었다. 결론: 70$^{\circ}C$이상의 가열은 렌즈에 변형을 발생시킬 수 있으므로 안경사는 착용자의 작업환경을 고려하여 적절한 렌즈를 추천하여야 하며, 착용자가 안경 사용에 주의를 기울일 수 있도록 안내를 해야 할 것이다.
친수성 안의료용 렌즈 재료에 하이드록시기를 가진 아크릴레이트계 모노머인 HEA(2-hydroxyethyl acrylate), HEMA(2-hydroxyethyl methacrylate), HPMA(hydroxypropyl methacrylate) 및 Ag nanoparticles가 첨가제로 사용되었으며, 교차결합제인 EGDMA(ethylene glycol dimethacrylate)와 개시제인 AIBN(azobisisobutyronitrile)을 사용하여 공중합하였다. 하이드로젤 친수성 렌즈는 100 ℃에서 1시간 동안 열 중합을 통해 제조되었다. 제조된 하이드로젤 친수성 렌즈의 함수율, 굴절률 그리고 광투과율을 측정함으로써 렌즈의 광·물리적 특성을 분석하였다. HEA, HEMA 그리고 HPMA의 평균 함수율은 82.12%, 37.06% 그리고 21.57%로 각각 측정되었으며, 굴절률의 경우 1.3540, 1.4330 그리고 1.4649로 각각 측정되었다. 제조된 하이드로젤 친수성 렌즈의 분광투과율을 측정한 결과, 근자외선 영역에서는 82.67%, 80.32% 그리고 79.83%로, 가시광선 투과율의 경우 89.72%, 88.24% 그리고 86.89%로 각각 측정되었다. 또한 은 나노입자를 포함한 시료의 광투과율은 근자외선 영역에서 10.59% 그리고 가시광선 투과율에서 43.74%로 각각 측정되었다. 이 결과로 볼 때 분자길이는 중합된 고분자 물질의 함수율 및 굴절률에 영향을 주는 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.