• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.64-69
• /
• 2016

A new compact conformal dome optical system was established, and the aberration characteristics of the dome were investigated using Zernike aberration theory. The aberrations induced by the dome at different fields of regard (FORs) from 30° to 100° were effectively balanced by a rotating cylindrical lens. This kind of optical system can be widely used in top-view optical searching devices. A design method was introduced and the optimization results analyzed in detail. The results showed that the Zernike aberrations produced by the conformal dome were decreased dramatically. Also, a complete conformal optical system was designed, to further illustrate the aberration correction effect of the rotating cylindrical lens. Using a cylindrical lens not only provided a large FOR, but also simplified enormously the structure of the conformal optical system.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.99-103
• /
• 2003

본 연구에서는 4매의 렌즈로 해상도와 왜곡을 최적화한 렌즈 설계이다. 컴팩트한 광학계를 얻기 위해서 retrofocus 형태의 광학계 대신에 (+)굴절능과 (-)굴절능으로 조합된 telephoto 형태로 구성하였다. 이미지 센서 렌즈계의 설계 사양은 초점거리 8.3mm, F/# 2.8, 그리고 화각은 $54.7^{\circ}$였다. MTF 값은 설계된 물체 높이의 경우 110 lp/mm의 공간주파수에서 0.57 이상으로 나타났다. 설계된 렌즈계는 디지털 스틸 카메라용 광학계에서 요구되는 성능을 충분히 만족하며, 특히 렌즈설계의 간단한 프로파일 특성 때문에 컴팩트한 디지털 카메라와 저비용 설계에 적합하다.

• Design & Manufacturing
• /
• 제2권1호
• /
• pp.33-38
• /
• 2008

As consumer in optics, electronics, aerospace and electronics industry grow, the demand for ultra precision aspherical surface lens increases higher. Precision turning with single-diamond tools has a long history of development for fabrication of optical quality surfaces since the advent of aerostatic rotary spindles and precise linear motion guide ways. To enhance the precision and productivity of ultra precision aspherical surface micro lens, the following specification of ultra precision grinding system is required: the highest rotational speed of the grinder is 100,000rpm and its turning accuracy is $0.1{\mu}m$, positioning accuracy is $0.1{\mu}m$. The development process of the grinding system for the ultra precision aspherical surface micro lens for optoelectronics industry is introduced. In the work reported in this paper, an intelligent grinding system for ultra precision aspherical surface machining was designed by considering the factors affecting the surface roughness and profiles accuracy. An aerostatic form was adopted to build the spindle of the workpiece and the spindle of grinder and ultra precision LM guide way was adopted in this system. And this paper deals with mirror grinding of an aspheric surface micro lens by resin bonded diamond wheel and spherical lens of BK7. It results was that a form accuracy of $0.6{\mu}m$ P-V and a surface roughness of $0.006{\mu}m$ Rmax.

• 오토저널
• /
• 제15권3호
• /
• pp.89-95
• /
• 1993

This paper presents the development of CAD system for the design of lens of the Turn Signal Lamp that can model and simulate its optical performance. The system consists of three main modules: skin surface modeling module, inner lens modeling module and optical performance simulation module. Skin surface geometry can be modeled by the input of data file and inner lens can be modeled by the input of only four parameter using its geometric characteristics. Also light distribution pattern, the barometer of optical performance is generated by means of finite ray tracing method. The system display modeled geometry, ray tracing and generated light distribution pattern.

• Current Optics and Photonics
• /
• 제4권1호
• /
• pp.23-30
• /
• 2020

This paper presents a new method for designing a lens system stable against chromatic variation at a specified wavelength. Conventional lenses are corrected for chromatic aberration, but the new method suppresses chromatic changes of the marginal ray in the image-side. By doing so, paraxial properties of the lens system are stabilized against chromatic variation. Since the new method is based on paraxial ray tracing, the stabilizing conditions against chromatic variation are given by recurrence formulas. However, there is an analytic solution for the case of a cemented doublet in the air. A stable doublet at 405 nm wavelength is designed and analyzed.

• 한국광학회지
• /
• 제19권2호
• /
• pp.108-115
• /
• 2008

구면 SELFOC 렌즈와 플라스틱 비구면 렌즈를 사용하여 mobile phone 광학계를 설계하였다. SELFOC 소재는 radial GRIN(gradient index) 분포를 가지며, 이것은 설계에 추가적인 자유도를 제공하므로, 비구면을 구면으로 대치할 수 있다. 두개의 플라스틱 비구면 렌즈로 구성된 통상적인 2P 광학계와 결상특성을 비교 하였다. 이 연구에서는 시판되고 있는 SELFOC 소재를 사용하여 1GRIN 1P 광학계를 설계하였다. 그러나 1GRIN 1P의 성능보다 통상적인 2P 광학계의 성능이 좋았다. 1GRIN 1P 설계에서 성능은 GRIN 소재의 굴절률 구배에 의지하므로 굴절률 구배가 클수록 좋은 성능을 보인다. 그러므로 큰 굴절률 구배를 갖는 가상의 GRIN 소재를 사용하여 광학계를 설계하였다. 현재 시판되는 SELFOC 소재보다 3배 정도 굴절률 구배가 큰 GRIN 소재가 개발된다면, 1GRIN 1P 광학계의 성능이 통상적인 2P 광학계의 성능과 유사하거나 더 좋아 질 것이다.

• Current Optics and Photonics
• /
• 제4권5호
• /
• pp.441-445
• /
• 2020

A novel design for a Fresnel lens for a solar end-pumped laser is demonstrated in this paper. The new hybrid Fresnel lens includes two parts, inner and outer. The inner part is a twice-total-internal-reflection and vertical-transmission lens. The outer part is a once-total-reflection and vertical-transmission lens. The radius of the Fresnel lens is 600 mm, and its focal length is 750 mm. The concentrating performance of the Fresnel lens is examined using TracePro. The results show that the concentration efficiency has been greatly improved. The total concentration efficiency of the hybrid Fresnel lens reaches 73.2% when the radius of the laser rod is 3 mm. This design can simplify the concentration system of a solar end-pumped solid-state laser.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.447-453
• /
• 2013

A micro zoom system without moving elements by use of two liquid lenses is designed and optimized in this paper. The zoom equations of the system composed of two liquid lenses are deduced. The structure parameters including radius and thickness of a conical double-liquid electrowetting based lens are analyzed and calculated. Because the liquid thickness varies non-linearly with the radius of the interface, it's very difficult to optimize a real liquid lens using commercial optical design software directly. Through the Application Programming Interface (API) of the optical design software CODE V, a zoom system with two real electrowetting based liquid lenses is modeled and optimized. A two-liquid-lens zoom system without moving elements, with a zoom factor of 1.8 and a compact structure of 10 mm is designed for illustration. This can be useful for the camera design of mobile phones, tablets and so on. And this paper presents a convenient way of designing and optimizing a zoom system including liquid lenses by commercial optical design software.

• 조명전기설비학회논문지
• /
• 제28권8호
• /
• pp.24-31
• /
• 2014

This paper dealt with the LED optical illumination system design for the Masthead navigation light to replace halogen lamps. We made Fresnel lens satisfy luminous intensity distribution of "Convention on the International Regulation for Preventing Collisions at Sea(COLREG)". The optical system is designed by classifying three parts: light source, lens, and cut off plate. The source of light has been made to have the uniform horizontal and vertical light distribution by placing 6 LEDs at intervals of $54^{\circ}$, and as the cylindrical Fresnel lens, the lens has been designed to achieve the uniform horizontal and vertical light distribution in the range of plain light. Finally, the cover has been designed to block the light from the outside of plain light and ultimately met the standards for light distribution of navigation lights. In addition, the validity of design has been verified with manufacturing a trial product.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.173-179
• /
• 2003

In optical storage device system, there are several research topics to increase its recording density. The main idea is reducing wave length of laser diode and magnifying the number of numerical aperture (NA). In conventional optical system NA cannot be over the unity in the air because of its diffraction limit. But it is possible to overcome its limitation of unity in near field using Solid Immersion Lens. In this work, the mathematical Solid Immersion Lens (SIL) design process was illustrated by using near field theory. Also, numerical SIL design parameters were calculated by means of CODE V. Through the work, we propose the new type of SIL for high density optical recording systems.